power press used for sale

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Key data: 100 KW, 125 kVA, 230 V

125 KVA generator with 100% brushless copper alternator and digital control for operation as an emergency power generator. "CE" certified diesel engine from RICARDO ("KOFO" Premium Series) Type Stamford: "CE" certified quality synchronous alternator with 100% copper winding! Rated power: 100KW/125KVA Standby power: 110KW/138KVA Controller: SmartGen/HGM6120 50Hz 220V/400V three phases including sockets Super-Silent type, Noise (LP1m) < 68 dB water-cooled, with 1500 rpm large tank for 8 hours of operation Size: 260011001350mm, Weight: 1380kg Optional: 2-year warranty/warranty that goes way beyond the usual (you can extend if needed). Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) Switzerland- and Europe-wide service available. Diesel particulate filter available. Ricardo has been building marine diesel for almost 100 yea ...

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

3000 x 1500mm LOW HOUR MACHINE with Compact Express / Brush Tables

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Key data: 2420 KW, 400 V

MTU 20V4000 and 16V4000 UPS systems with 250 operating hours in mint condition immediately available

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machinable dimensions: Max. width 1300 mm Installed power: 17 Kw NATURE: 02 incoming side brushes - Ø 250 mm 02 horizontal brushes - Ø 400 mm 02 transverse brushes - Ø 400 mm EQUIPMENT: 02 Inlet/outlet tables

Machine type: MIG/MAG welding machine Type PowerMAG MM 4200 W complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 40 – 420 amps Duty cycle 60% ED at 420 amps 80% ED at 360 amps 100% ED at 325 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 32 Amps Dimensions L x W x H 900 x 400 x 650 mm Weight 110 kg Age 3 months Condition workshop tested, like new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 1 can of non-stick spray 1 Piece Instruction Manual Warranty 24 months from the date of delivery List fa ...

For sale are 4 pieces of fully overhauled turbochargers from the manufacturer ABB. These turbochargers have an operating time of 0 hours since their complete overhaul and are therefore in mint condition. 1 piece turbocharger Z140, Ref. P/N: 634433 1 piece Turbocharger Power2 340-H44 HP, Ref. P/N: 1205685 1 piece turbocharger Z140, Ref. P/N: 634434 1 unit Turbocharger Power2 340-H44 HP, Ref. P/N: 1205686 The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any questions or for more information. We look forward to your inquiry. Connection dimensions suitable for the following motors: - Jenbacher J624

We sell 170 x Dell PowerEdge T340 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacturers ...

Direct from meat-free facility. Perfect for making texturised meat-like products as well as petfoods, pizza toppings, ready meal ingredients etc.

The 2014 MAN 18V32/40CD power plant is a heavy fuel oil facility offering a total capacity of 108 MW through 12 identical generating units. Each unit is capable of producing 8.75 MW and is paired with Hyundai Heavy Industries 10,324 kVA alternators. The system operates at 11 kV and 50 Hz, and each unit has logged approximately 9,100 running hours. This used power plant is designed for continuous base-load operation and includes a full complement of ancillary equipment, such as transformers, switchgear, and control systems. This MAN power plant is ideal for various applications, including independent power producer (IPP) projects, utility power generation, and industrial captive power solutions. It can also serve as a primary or backup power source for data centers. Its medium-speed engine technology is known for efficiency, longevity, and easy access to spare parts globally, making it ...

; Gross weight [kg]: 35

; Gross weight [kg]: 2250

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

Used machine in good condition. Available for immediate delivery. - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): n/a - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

- Excellent condition. Always maintained with Official Prima Power Service. - Only 51.849 working hours. - Full maintenance in 2023, including new Shear Blades in 2023 - SG6 Series 12. - Warranty start in 2006. - TU6 tapping. - Forming System. - 4

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm

9 inch cutting lense Retractable clamps (4) VPN Teleservice - Laser Type: FP4000 3.x - Working area (X x Y x Z): 3.048 x 1.524 mm - Max. workpiece weight: 800 kg - Positioning speed X/Y: 300 m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 12 mm - Maximum material thickness aluminium: 8 mm - Control: Siemens 840 D - Machine ON Working hours: 40.941 h - Beam ON Working hours: 21.798 h - Power: installed max: 15 kW - Weight: 24.500 kg - Dimensions (long x wide x high): 9.503 x 2.560 x 2.672 mm

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.000 x 150 mm - Positioning speed X/Y: 140 m/min - Laser Output: 2 kW - Maximum material thickness mild steel: 15 mm - Maximum material thickness brass: 4 mm - Maximum material thickness cupper: 4 mm - Maximum material thickness stainless steel: 8 mm - Maximum material thickness aluminium: 4 mm - Beam ON Working hours: 25.600 h - Weight: 10.000 kg

; Gross weight [kg]: 690

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Including - Loading and Unloading - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): 20 (D 2x Index, B, 10x, 6 6X (2x Index) - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 55 t - Bending length: 2.050 mm - Axes: 8 - Working area: 200 - 1.770 mm - Distance between uprights: 2.100 mm - Returning speed: 180 mm/seg - Frame type: O-frame - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 5.000 kg - Dimensions (long x wide x high): 3.388 x 2.385 x 2.555 mm

Includes:- Night Train automatic warehouse - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: n/a - Number of turret stations (pcs): 20 - Turret rotation: 30 r/min - Axis speed [X axis] max: 80 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 270 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 5 mm - Oil tank capacity: 330 l - Material thickness stainless steel max: 3 mm - Weight: 24.000 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Used machine in good condition. Available for immediate delivery. - Max. workpiece weight: 10.500 kg - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Power supply: 15 kVA - Turret rotation: 24 r/min - Compressed air pressure min: 6 bar - Control type: SIEMENS SINUMERIK 840D - Axis speed [X axis] max: 90 m/min - Number of turret stations (pcs): 20 - Operating hours: 45.248 - Punching force: 200 kN - Working area max: 2.530 x 1.270 mm - Material thickness max: 8 mm - Compressed air consumption max: 5 l/s

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.

Hydraulic motor Manufacturer : Rotary Power Article: SMA 1430 C1 182 Condition : New

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg