power press used for sale

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Omron, Power Supply -Type: S8VK-C12024 -Input: 100-240V 50/60Hz 2.6A -Output: 24V 5A -Quantity: 1 module available -Dimensions: 120/40/H130 mm -Weight: 0.6 kg

-New -Spare and fittings Auction-ID: A1-49820-25

Condition: Very Good Brand: JCB (U.K) Model : G220RS V Power : 160KW200KVA Engine: FPT Iveco 6 cylinder Turbo Diesel Stage 5 Year of Make: 2022 Operating hours approx. 6323h RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Incl. sockets Complete with control Incl. diesel tank in the base frame Auction-ID: A1-50111-4

Equipped with: power: 37.5 kVA / 30 kW (primary power), engine: 4-cylinder diesel engine, speed: 1500 rpm, voltage: 230/400 V (3-phase), frequency: 50 Hz, current: approx. 54 A, fuel consumption: 12 - 12.3 l/h at full load, control panel: AMF 6120 digital control panel, soundproof housing, weight: approx. 900 kg, dimensions: approx. L: 200 cm x W: 85 cm x H: 117 cm, electronic display, Auction-ID: A1-47390-165

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 850 mm   table surface (front-back): 550 mm SLIDE   table surface (left-right): 560 mm   table surface (front-back): 376 mm   spigot hole diameter: 50 mm   stroke: 110 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 0 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 855 mm   space requirements -front/back-: 1635 mm   total height: 2640 mm   total weight approx.: 5400 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: optional   European CE standards: yes

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 50 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 440 mm   table surface (front-back): 360 mm   spigot hole diameter: 40 mm   stroke: 90 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 700 mm   space requirements -front/back-: 1295 mm   total height: 2360 mm   total weight approx.: 3000 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm   stroke rate (max.): 67 /min SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   total weight approx.: 5600 kg

PRESS DESIGN   drive system: eccentric / crank   table cushion: yes PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   opening in bed (diameter): 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   clamping surface diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATIONS   total power consumption: 5.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/righ ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 55 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 400 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 50 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 6 mm   stroke max.: 50 mm   stroke rate (min.): 50 /min   stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1500 mm   total height: 2500 mm   total weight approx.: 3850 kg ATTACHMENTS (PRESSES)   strip feeder: optional   fe ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 130 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 700 mm   thickness of bolster plate: 80 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 550 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   stroke min.: 19 mm   stroke max.: 165 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 525 mm ELECTRICAL SPECIFICATIONS   total power consumption: 11 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1685 mm   space requirements -front/back-: 1910 mm   total height: 3340 mm   total weight approx.: 11000 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 580 mm   table surface (front-back): 360 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 110 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 9 mm   stroke max.: 76 mm   stroke rate (max.): 140 /min   main drive power: 2.2 kW TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 214 mm ELECTRICAL SPECIFICATIONS   total power consumption: 2.25 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 1.08 mm   space requirements -front/back-: 1.05 mm   total height: 2.1 mm   total weight approx.: 1800 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   European CE st ...

CONTROLS    SIEMENS SIMATIC PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 970 mm SLIDE   stroke rate (max.): 90 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3200 mm   space requirements -front/back-: 1600 mm   total height: 4400 mm   total weight approx.: 32000 kg

CONTROLS   conventional PRESS FORCES   total force (nominal): 100 to SLIDE   stroke rate (max.): 55 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 10 mm   stroke max.: 120 mm DIMENSIONS / WEIGHTS   total weight approx.: 4800 kg

Pneumohydraulic TOX powerhouse of the reinforced Q-K series, installed in a stationary joining station. The unit combines a pneumatic pre-lift with a hydraulically generated power stroke and is used for pressing, joining, press-fitting or clinching processes. The robust Q series enables high repeatability, stable force delivery and is suitable for long-term industrial applications in multi-shift operation. Type: Q-K 008.3030.080.08H Series: Q-K (reinforced pneumohydraulic powerhouse series) Technical data: Force level: 008 Press force typ. 15–30 kN (at 6 bar, depending on model) Stroke lengths: Advance stroke (express stroke): 30 mm Force stroke: 30 mm Total stroke: 60 mm Piston rod/mechanical variant: 080 = extended piston/mechanical unit Tool connection: 08 = tool holder version 08 (defines thread, centering, clamping geometry) Special design: H = customer-specific variant (heavy ...

Assembly / press station with TOX power pack, feeding unit and sensors Pneumatic-hydraulic assembly or press station from an industrial plant, consisting of frame, press drive, feed and control/sensor components. Last use for semi-hollow rivets Ø 4.0 mm, length 5.0 mm (stainless steel 1.4016). Conversion to other rivet types/sizes depending on the tool set. Condition Used, from production dismantling Mechanically complete Optical with usual signs of use Untested, no function or process test carried out Sale as shown Scope of delivery Complete pressing/assembly station TOX powerhouse Feeding unit incl. funnel and valves Sensors, pneumatics, electrical components Technical data:Main components Machine frame / system Manufacturer: VTS – Connection Technical Service Type: 300-4/180.6 Serial No.: 300.329.00 Stable steel frame, floor-standing, ready for assembly Press drive Manufactu ...

Assembly / press station with TOX power pack, feeding unit and sensors Pneumatic-hydraulic assembly or press station from an industrial plant, consisting of frame, press drive, feed and control/sensor components. Last use for semi-hollow rivets Ø 4.0 mm, length 5.0 mm (stainless steel 1.4016). Conversion to other rivet types/sizes depending on the tool set. Condition Used, from production dismantling Mechanically complete Optical with usual signs of use Untested, no function or process test carried out Sale as shown Scope of delivery Complete pressing/assembly station TOX powerhouse Feeding unit incl. funnel and valves Sensors, pneumatics, electrical components Technical data:Main components Machine frame / system Manufacturer: VTS – Connection Technical Service Type: 300-4/180.6 Serial No.: 300.329.00 Year of construction: 2000 Stable steel frame, floor-standing, ready for ass ...

Pneumohydraulic TOX powerhouse of the reinforced Q-K series, installed in a stationary joining station. The unit combines a pneumatic pre-lift with a hydraulically generated power stroke and is used for pressing, joining, press-fitting or clinching processes. The robust Q series enables high repeatability, stable force delivery and is suitable for long-term industrial applications in multi-shift operation. Type: Q-K 008.3030.080.08H Series: Q-K (reinforced pneumohydraulic powerhouse series) Technical data: Force level: 008 Press force typ. 15–30 kN (at 6 bar, depending on model) Stroke lengths: Advance stroke (express stroke): 30 mm Force stroke: 30 mm Total stroke: 60 mm Piston rod/mechanical variant: 080 = extended piston/mechanical unit Tool connection: 08 = tool holder version 08 (defines thread, centering, clamping geometry) Special design: H = customer-specific variant (heavy ...

TOX Double Press (2-Cylinder System) Manufacturer: TOX Pressotechnik Model: Kraftpaket line-X – Double Cylinder Type Cylinder: X-K 008.3030.100.12H System: 1 Press = 2 Coupled Cylinders Condition: used, complete, dismantled from industrial production Technical data: TOX Kraftpaket line-X 2× Cylinder Type X-K 008.3030.100.12H incl. central control block, pressure gauge and sensors Robust industrial design Dimensions: Length approx. 80 cm Width approx. 30–32 cm Height approx. 25 cm Weight approx. 80 kg Series: TOX Kraftpaket line-X, Type X-K Force class: Size 008 (medium press force class) Stroke configuration: 30 mm pre-stroke + 30 mm Force/setting stroke Total stroke: 60 mm Powerpack stage: 100 (≈ 50–60 kN at 6 bar) Max. operating pressure: 6 bar (according to the blade) Volume: 47 ml Version: 12H (reinforced / Heavy Duty) Application: joining, embossing, clinching, punching, ...

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Hydraulic

Energy chain including covers, closed, can be opened. Black dimensions 75 x 55. Unused mint condition! 10 mtr. present a ´ mtr. 29.-NET Very high quality see photos! 0170 / 2204056 Info Mail fa.raupp@t-online

Piston diesel operation - almost new

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-37 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-55 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-75 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.