power plant used for sale

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

Manufacturer: Tomal Type: PolyRex 3.0 Year of Make: 2000 Content: 2 x 1.5 m3 Conveying / Dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless Steel Type: Vertical Dimensions: L 1,900/1,050 x W 1,800/600 x H 2,200/2,200 mm Curb weight: 300 kg Tech. Documentation: Yes Condition: Used Price: On request

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Complete plant for the production of sand-lime bricks - Autonomous production plant with 6 employees - The plant is designed for a production of 50,000 tons /year - Pipe material round stone, aggregate size 32-50 mm - Crushing from 16-50 to 0-3 mm - Primary crusher/fine crusher/harp sieve/filler mill - Extinguishing in reactors 1&2 - Pressing: the press presses at 120 bar - Hardening boiler steam plant/so-called autoclaves = total 6 pcs. + 1 reserve - Residual steam is reused or discharged to the other halls - Packaging system: Fully automatic

Key data: 120 mm, 60 , 60 1/min

pallmann style agglomerator ; Plastic Recycling Machine for Film, Yarn, Bags, Fabric Stretch Film PE Film PP Film, Fiber Film, Filament, Fabric Technical Textile, Fiber Yarn Filament PE PP Scrap Sack Rope Film Stretch Film Stretch Film Recycling PE Stretch Film LLDPE Stretch Film Power Stretch Recycling PE Film Recycling HDPE Film Recycling LLDPE Film Recycling Used for recycling fiber, filament, yarn, nonwoven, sack, meltblown, film, stretch film and other plastics. Brand plastic recycling machine for PE, PP, PVC, bio, PLA, ABS, nylon, etc. recycling system.

Manufacturer: AVESCO Model: TBG 926-2K Erdgas Year of Manufacture: 2008 Type of Machine : CHP plant with peak load boiler (gas) Power Pth: 1950 kW (connected load WV) Pel: 175 kW Gas Engine: Liebherr TBG 926-2K, S/N 2005 02 7547 Synchronous Generator: Baujahr 2007, HCI 434 C2 250 kVA, S/N D23055s001 Electrical Output: 176 kW el Thermal Output: 260 kW th Operating Hours: Requirements: operation according to 90,000 Bh Weight (approx.): 8,000 kg Find more here - / Contact us at -

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

USED TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 2006 Item #: Usm-213 Category Tetra Pak TBA 19 TBA 19 125ml Slim Filling Machine, version 30v, Year 2006 Straw Applicator TSA 21 Tetra Shrink 51, Year 2006 Conveyors and Paper Trolly Condition: Good and Still on Production.

USED TETRA PAK TBA 19 250ML EDGE FILLING LINE FOR SALE YEAR 2009 Item #: Usm-217 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 250ml edge Filling line for sale. 1-TBA 19 250ml edge filling machine, version 30v, year 2009, working hour 35000 2-Cap Applicator 30, Cap Flex 30, Year of manufacturing 2017, Working Hours 17000 3-Maak Packer Turner 4-Tetra Pak Easy ride and conveyors control system 5-paper trolly and conveyors Condition: excellent condition and still on production.

PreviousNext USED TETRA PAK A3 SPEED 200ML SLIM FILLING LINE FOR SALE YEAR 2010 Item #: Usm-221 Category Tetra Pak A3 Speed Used Tetra Pak A3 Speed 200ml Slim Complete Filling Line For Sale A3 Speed 200ml Slim Filling Machine, Year 2012, version 300v, Speed 24000 Packs Per Hour Helix Accumulator Straw Applicator TSA 22 Cardboard Packer 30 Speed Conveyors and Paper Trolly Condition: Line Still on production, can be seen on production. Tetra Pak maintained.

USED TETRA PAK TBA 19 250ML BASE 30v FILLING LINE FOR SALE Item #: Usm-234 Category Tetra Pak TBA 19 One used Tetra Pak tba 19 250ml base filling line for sale. 1-TBA 19 250ml Base filling line, year of manufacturing 2007, Version 30v, working hours 11900 2-Straw applicator tsa 21 3-tetra pal shrink tts 51 4-20m Tetra Pak conveyors and easy ride 5-Paper trolly Condition: Good

USED TETRA PAK TB 19 250ML BASE 20V FILLING LINE FOR SALE Item #: Usm-235 Category Tetra Pak TBA 19 Used TB 19 250ml Base Filling Line available for sale 1-TB 19 250ml Base Filling Machine, Year 2003, Version 20v, Non Aseptic 2-Straw applicator TSA 21 3-Easy ride and conveyors 4-Shrink TTS 51 Paper trolly and spare parts

USED TETRA PAK TBA 8 1000ML SLIM FILLING LINE FOR SALE Item #: Usm-236 Category Tetra Pak TBA 8 ONE USED TETRA PAK TBA 8 1000ML SLIM COMPLETE FILLING LINE FOR SALE. 1-TBA 8 1000ml Slim Filling Machine, Year of manufacturing 2001, Version 100v, working hours 23000 2-Tetra Cap Applicator Flex 30 for helicap 23, Year of manufacturing 2014 and working hours 7000 3-Tetra Pak Packer 70 4-Conveyors system and Paper trolly Complete line is in working condition and Tetra Pak maintained.

REFURBISHED TETRA PAK TBA 19 200ML SLIM 30v FILLING LINE FOR SALE Item #: Usm-237 Category Tetra Pak TBA 19 Refurbished TBA 19 200ml Slim 30v Filling Line for sale 1-TBA 19 200ml Slim Filling Machine, Year of manufacturing 2007, Version 30v, Working hours 30000 2-Straw applicator TSA 21 3-Multi Shrink wrapper 65 4-20meter conveyors and Paper trolly Condition: refurbished and test run approved.

USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.

USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 Item #: Usm-240 Category Tetra Pak TBA 19 USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 TBA 19 250ml Slim Filling Machine, Year of manufacturing 2003, Version 10v, With ASU Straw Applicator TSA 21 Multi Shrink 65 Conveyors and Paper Trolly Condition: Refurbished and Test Run Approved. Excellent Condition.

USED A3 FLEX 200ML SLIM 150v FILLING LINE FOR SALE YEAR 2008 Item #: Usm-241 Category Tetra Pak A3 CF/Flex USED A3 FLEX 200ML SLIM 150v FILLING LINE FOR SALE YEAR 2008 A3 Flex 200ml Slim Filling Machine, Year 2008, Version 150v, Working Hours approx 25000, Speed 9000 packs per hour Straw Applicator TSA 21, YEAR 2009 Film wrapper 67, YEAR 2008 Packer TCBP 70, YEAR 2008 Conveyors and Paper Trolly Condition: Dismantled and Packed in Wooden Box.

USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 Item #: Usm-242 Category Tetra Pak A3 CF/Flex USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 A3 Flex 1000ml Gemina Filling Machine, Version 150v, Year of manufacturing 2007, Speed 7000 Packs per hours, Working hours 43250 Cap Applicator Cap Flex 30, Year of manufacturing 2007, Cap Type Helicap 27 Conveyors and Paper trolly Condition: Good

USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 Item #: Usm-243 Category Tetra Pak TBA 9 USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 TBA 9 200ml Slim Filling Machine, Version 130v, Year 1993 Straw applicator TSA 36 Shrink TTS 51 Conveyors and Paper trolly Condition: Good

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Large pizza oven, manufactured by Pizza Master, model PM 731 E. 400V, 50 Hz, 9,5kW

Plant for the production of paving stones Capacity of the plant approx. 100-150,000 thousand tons per year Viewings possible now

Used Used Galdi Packaging RG50-2 Brick: Year: 2010 Condition: Good Used Galdi Packaging RG50-2 Brick: Model: RG50-2 Year: 2010 Speed: 2500 bricks per hour Direction: from left to right Product type: 1.5 l ? 2 l milk bricks CARTON FORMING Lower closure with heat sealing by presses CAP INSERTER Single-head Type of cap: Pure Twist Flip_34i Head height adjustment: Fixed (the carton is lowered to change format) FILLING MACHINE Number of filling valves: 3 Tank height adjustment: Fixed (the carton is lowered to change format) Filling type: with flow meters Type of valve and valve functions: AISI 316 valve with pneumatic actuator CARTON CLOSING Upper closure with heat sealing by means of presses GENERAL DATA Measurements of the cartons that can be processed (length; width; height): 96 mm x 96 mm height depends on the format Safety protection Code: QT 732 More details: https://bottlingscout.com

Krones Spirit Filling Line Max Speed 18,000 BPH Suitable for 70cl, 75cl and 1 litre bottles Includes; Accummulator - Hartness Dynac - Dynac 6400 - 2004 Cap Feed Elevator - Gassner - Compact Feeder - 2005 Cap Feeder Elevator - Zalkin - Promach 400l - 2020 Cap Feed Elevator - Zalkin - FCT 1911 - 1998 Cartoner - Langenpac - HCC - 2004 Case Erector 1 - Krones - Variocart C-40 - 2004 Case Erector 2 - Krones - Variocart C-40 - 2004 Case Printer 1 - Marsh - Encore - 2007 Case Printer 2 - Marsh - Encore - 2007 Case Sealer - Krones - Variocol H-120 - 2004 Depallitiser - Krones - ABSCH.PRESS.URI1 - 2004 Deshrouder - MSK - MSK 800 - 2004 Divider - SFT Syncro Laner - VWS - 2004 Fill level inspection - Mapex - FLO - 2004 Capper 1 - Zalkin - T9/360 - 2004 Capper 2 - Zalkin - T9/360 - 2004 Capper 3 - Zalkin - T9/360 - 2004 Filler Bloc ...

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

Fillet system, consisting of: Filleting machine Manufacturer: PRIMA s.r.l Model No.: WCLSE-1000/1 Capacity: 200-800 kg/h Climbing snail Machine: Conveyor Manufacturer: PRIMA s.r.l Type: Cochlear Enhancer Model No.: CHT50B003 Schnetzler Machine: Cutting Device Manufacturer: PRIMA s.r.l Model No.: CHT50B003 Lifting and tilting device Manufacturer: Frontmatec Hygiene GmbH Type: 27000 Accommodates 200 and 300 litre standard loading trolleys for rational use in the food industry

Ribbon and long moulders Weight range 500 - 2,000 g / piece Hourly output 800 - 2,000 pieces Ribbon Rounder 250cm Knitted Length Adjustable trough inclination Long moulder up to max. product length 50cm Knitted distance 170cm Stainless steel version incl. 2 flourers - Bakery condition not cleaned - partially. in need of overhaul

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

Aerated concrete plant complete for 60,000 m³ per year

Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time

Fresh Milk Pasteurisation & Bottling Line General Overview: Complete fresh milk processing and bottling line, designed for small to medium-scale dairy production. The line covers the full process from separation and pasteurisation to homogenisation, filling, and final packaging of 1L PET bottles. All components are industrial-grade and suitable for continuous operation. Process Flow: - Milk separation - Pasteurisation (flash system) - Homogenisation - Buffering / storage - Bottle handling and filling - Sealing, labelling, coding, and packaging Main Components & Technical Specifications: - Milk Cream Separator - Make: Seital - Model: SE13X - Capacity: 2,500 L/h - Year of Make: 1993 - Plate Heat Exchanger – Flash Pasteuriser - Make: KMA - Model: K21-FS/4273 - Capacity: 2,500 L/h (heating from 8°C to 75°C) - Year of Make: 1998 - Homogenizer  ...

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

We sell a high performance doming machine Machine for the production of LED and electronic encapsulation, 3D stickers and much more. The doming machine is designed for production with 2K polyurethane or UV doming resin and offers flexible applications, e.g. for the casting of LED light strips, for electronics sealing or doming stickers Condition: very good Our doming system is designed for industrial continuous load: precise axes, volumetric gear metering, and user-friendly software. Whether it's LED potting, electronic coating or 3D stickers, you get a machine that reduces your unit costs while keeping quality consistent. An all-rounder for series production for maximum cycle time and large components. With a height-adjustable, mobile work table, for a flying change in continuous operation without downtime, ideal for wide range of applications. IN A NUTSHELL • Hig ...

Process plant for the production of nut butters,, consisting of:, Product feed container (stands on platform),, 2 Lico mills with 2 Börger product pumps,, 2 collecting containers with lids for the puree,, 2 control cabinets for the 2 mills,, chiller, 6 x product tanks with a capacity of approx. 760 kg nut butter) and control cabinet,, Each tank can be controlled individually., Settings: speed of the agitator, stirring interval (x min on, x min off)

Manufacturer: SBM Model: Remax 1111 Machine Type: Mobile Crushing Plant Year of Manufacture: 2017 Drive Power: 15 kW Weight: 4,500 kg Operating Hours: - Diesel Engine: 5,366.7 hours - Crusher: 4,568.8 hours - Hydraulics: 373.4 hours Find more here - / Contact us at -

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

Bottling plant with canteen kitchen, which is located in a complete enclosure, is sold due to site closure. 7 pieces of Schneider cooking kettles in V2A double-walled heated with a 24KW) 400 litres (together 2800 litres!) and a Nüssler extraction system and a Novapack filling system (rotary machine) with LFA air filter system and complete equipment for filling currently 500 gram cups with UV disinfection solution for cups and circuit boards. Plastic lids are placed fully automatically after capping. See photos for details. Various accessories and spare parts are also sold as the site is closed. The facility has been proven to have been used very little and can still be visited until the end of March 2026. System available immediately from site. Lead time for optional dismantling and delivery and assembly currently approx. 2 weeks. A bottling plant with a commercial kitchen, housed in a ...

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Key data: 60 mm, 30 , 150 U/min

used Bellaform extruder with 60 mm screw diameter, strand nozzle, water bath and strand granulator

The ROTOTEMP 1,5 is a scraped surface heat exchanger for cooling or heating various products, with a heat exchange surface of 1,5 m2. The heat exchanger consists of a jacketed outside cylinder and a jacketed internal cylinder. The outside jacket is insulated and finished with stainless steel sheeting. The product space is located between the two cylinders. A rotating cage with scrapers is fitted in the product space. The scrapers ensure proper mixing during the tempering process. Because the cylinders are scraped continuously, it is possible to cool crystallizing products without a product layer building on the walls. It is also possible to heat products without the danger of sticking to the walls. Thanks to these characteristics and the design of the installation, it is also possible to accurately perform heat exchange processes for products with high viscosity., Technical specification ...

2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator  ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...

UHT Pilot Plant APV Tube Heater Capacity: approx. 100 Ltr./h - Tube heater - 2 process tanks with a capacity of approx. 70 litres each - High-pressure homogenizer APV LAB 100 - PWA Cooler

Table fat maker Jufeba T 01 2 immersion grids with draining tray and steam lid Grease pan heating manual Connection 400V, 16A-CEE plug Used device cleaned