26708 results power plant

Category: 709 other food machines / Homogenisers for dairy
Latest update: 09.09.2026
approved
dealer
item-No.: 168896242
New in: 2006

used

Location: Land-de

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Category: 709 other food machines / Plate heat exchangers
Latest update: 09.09.2026
approved
dealer
item-No.: 168896316
New in: 2008

used

Location: Land-de

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Category: 709 other food machines / Production lines
Latest update: 09.09.2026
approved
dealer
item-No.: 169253818
New in: 1993

used

Location: Land-de

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Category: 1200 machines and plants for process engineering
Latest update: 12.08.2026
item-No.: 169800688

used


This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Category: 703 meat and fish processing machines / Vacuum mixer
Latest update: 09.09.2026
approved
dealer
item-No.: 169833588
New in: 2005

used

Location: Land-de

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

Category: 1200 machines and plants for process engineering
Latest update: 09.09.2026
approved
dealer
item-No.: 169993457

used

Location: Land-nl

General SKU226Y116 MakeYstral SerialY-PS 638134 TypeYstral Process System Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor35 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l. (580 l.) Vessel sizesø 880 x 1320 mm Dished bottomcheck Dished top sidecheck With jacket45 l. Max. temperature140 °C, Jacket: 180 °C With paddle stirrerHydrolysis stirrer Motor4 kW Speed mixing shaft7—84 rpm With homogeniserConti-TDS Motor22 kW, 300—3600 rpm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General Year of construction2009 LocationBarneveld With switchgear(as is) Floorspace5,40 x 5,00 m Total height3,60 m Weight7000 kg CEcheck Extra Spe ...

Category: 1200 machines and plants for process engineering
Latest update: 09.09.2026
approved
dealer
item-No.: 169993459

used

Location: Land-nl

General SKU226Y118 MakeGEA Wiegand Serial354320.90-1 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General Year of construction2015 LocationBarneveld Floor space3,19 x 1,27 m Total height1,92 m Weight800 Extra SpecificationsMain components—&:nbsp:One sanitary process/buffer tank (524 L, unpressurized, closed design, with cooling jacket, spray ball for CIP, DN200 hand-hole), with magnetic stirrer, 0,55kW, 400V, 369rpm— One closed-loop RO membrane unit, product-contact parts in stainless 1.4404— Feed pump, 200 µm edge-gap strainer, tube-bundle heat exchanger (loop cooler), one 3838 membrane housing, control and sampling valves, safety/relief valveFlow rates—&:nbsp:Feed pump (41P01): max 1,200 L/h (~1.2 m³/h at 55 bar)— Loop pump (01P01): max 15,000 L/hPressure  ...

Category: 1200 machines and plants for process engineering
Latest update: 12.08.2026
item-No.: 169993605

used


Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

Category: 1001 plants for concrete and precast technology / Concrete machines for mixing (stationary)
Latest update: 08.09.2026
item-No.: 170113234

new

Location: Land-se

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169113181

used

Location: Land-de
Price: 420 €

Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 40 power supply -Type: 6EP1437-3BA00 -Input: 3AC 400-500V/max.2.6A 50/60Hz -Output: 24VDC/40A/960W -Dimensions: 130/240/H120 mm -Weight: 3.4 kg

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 168977181

used

Location: Land-de
Price: 80 €

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1434-1SL01 -Input: 230/400 V 3 AC 50/60 Hz -Output: 24 V DC 10 A -Number: 6 pieces available -Price: per piece -Dimensions: 130/240/H125 mm -Weight: 3.3 kg/piece

Category: 401 filling machines
Latest update: 25.03.2019
approved
dealer
item-No.: 8362043
New in: 2008

used

Location: Land-de
VS

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Category: 1101 power generators
Latest update: 12.08.2026
item-No.: 168050444
New in: 2009

used


Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines

Category: 2305 other automation equipment
Latest update: 03.05.2026
approved
dealer
item-No.: 123413657

used

Location: Land-at

Power supply Siemens 6EP1437-1SL11

Category: 2305 other automation equipment
Latest update: 03.05.2026
approved
dealer
item-No.: 123413658

used

Location: Land-at

Category: 1101 power generators / Block combined heat and power stations
Latest update: 30.09.2020
approved
dealer
ankerimg
item-No.: 60205742

used

Location: Land-de
Price: 3.000 €

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007336

new

Location: Land-de
Price: 2.200 €

Net price: 2.200 € (excl. VAT) gross price: €2,618 (incl. VAT) - - - - - PTO generator 11 kVA with voltage regulator -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Power: 10 / 11 kVA - Voltage: 230 / 400 volts - Compound voltage regulator - Dimensions: 70 x 48 x 85 cm (L/W/H) - Weight: 115 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 20 hp - - - - - Sockets: - 1x 400V 16A - 1x 1-phase socket 230V 16A with thermal circuit breaker - - - - - Dispatch: - Germany-wide shipping incl. unloading is possible for an extra charge - In order to be able to give an exact freight price please se ...

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007340

new

Location: Land-de
Price: 4.400 €

Net price: 4.400 € (excl. VAT) gross price: €5,236 (incl. VAT) - - - - - PTO generator 22 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 20 / 22 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 80 x 60 x 98 cm (L/W/H) - Weight: 175 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 40 hp - - - - - Sockets: - 1x 400V 32A socket - 1x 1-phase socket 230V 16A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home operation ...

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007341

new

Location: Land-de
Price: 4.800 €

Net price: 4.800 € (excl. VAT) gross price: €5,712 (incl. VAT) - - - - - PTO generator 33 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 30 / 33 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 80 x 60 x 98 cm (L/W/H) - Weight: 220 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 60 hp - - - - - Sockets: - 1x 400V 32A socket - 1x 1-phase socket 230V 16A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home operation ...

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007346

new

Location: Land-de
Price: 5.850 €

Net price: 5.850 € (excl. VAT) gross price: €6,961.50 (incl. VAT) - - - - - PTO generator 50 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 42.5 / 50 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 360 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 80 hp - - - - - Sockets: - 1x 400V 63A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007347

new

Location: Land-de
Price: 6.650 €

Net price: 6.650 € (excl. VAT) gross price: €7,913.50 (incl. VAT) - - - - - PTO generator 66 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 60 / 66 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 440 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 120 hp - - - - - Sockets: - 1x 400V 125A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161007348

new

Location: Land-de
Price: 7.250 €

Net price: 7.250 € (excl. VAT) gross price: €8,627.50 (incl. VAT) - - - - - PTO generator 80 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - - Manufacturer: Green Power (Italy) - - - - - Data of the PTO generator: - Generator manufacturer: MeccAlte (Italy) - Power: 75 / 80 kVA - Voltage: 230 / 400 volts - AVR ESC - Speed: 1500 rpm. - Dimensions: 115 x 75 x 110 cm (L/W/H) - Weight: 450 kg - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 430 rpm - Recommended tractor power: 150 hp - - - - - Sockets: - 1x 400V 125A socket - 1x 1-phase socket 230V 32A - - - - - House - Field - Panel - The "House Field Panel" shown in picture 2 can be ordered for an extra charge - Switcher between home op ...

Category: 904 garden and communal machines
Latest update: 09.09.2026
approved
dealer
item-No.: 168971619

used

Location: Land-de
Price: 70 €

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: B

Category: 1101 power generators / Power-take-off shaft generators
Latest update: 25.01.2026
approved
dealer
item-No.: 161078894

new

Location: Land-de
Price: 4.400 €

PTO generator with AVR and IP45 --> This PTO unit is available in the power classes 22 - 80 kVA. List with prices can be found at the bottom of the text. - - - - - - Available models: 22 kVA, 33 kVA, 50 kVA, 66 kVA, 80 kVA - Manufacturer: Green Power (Italy) - - - - - Description: - PTO generator - Manufacturer: Green Power (Italy) - Generator brand: MeccAlte (Italy) - 22 kVA / 33 kVA / 50 kVA / 66 kVA / 80 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - Speed 1500 rpm. - Protection class: IP45 - AVR ESC - - - - - Digital Display: - Volt - Display (V) - Hertz - Display (Hz) - Operating hours - Meters - - - - - Sockets: - 1x 230 volts - 1x 400 volts - - - - - House - Field - Panel --> The "House Field Panel" shown in the photos can be ordered for an extra charge The panel includes the following extras: - Switcher between home opera ...

Category: 904 garden and communal machines
Latest update: 09.09.2026
approved
dealer
item-No.: 168995316

used

Location: Land-de
Price: 75 €

Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169022533

used

Location: Land-de
Price: 130 €

Power supply, converter, converter, power supply unit -Type: AS-i Power Supply AC1218 -Input: 3AC 400 V -Output: DC30.5V/8A -Number: 4x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169043595

used

Location: Land-de
Price: 50 €

Converter, power supply, power supply unit -Manufacturer: Siemens -Sitop Power 10/6EP1 334-2BA00 -Number: 2x available -Price: per piece -Dimensions: 135/100 / H130 mm -Weight: 1.2 kg/piece

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169059638

used

Location: Land-de
Price: 120 €

Power converter, power supply, power pack, switching power supply, power supply -Manufacturer: Siemens, power supply Sitop Power 20 -Type: 6EP1436-3BA00 -Number: 4x available -Price per piece -Dimensions: 160/125/H125 mm -Weight: 2.1kg/pcs

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169066758

used

Location: Land-de
Price: 130 €

Power supply, converter, power inverter, power supply unit -Type: AS-i Power Supply AC1218 -Output: DC30.5V/8A -Number: 11x power supplies available -Price: per piece -Dimensions: 125/90/H110 mm -Weight: 0.9 kg

Category: 1107 other energy machinery
Latest update: 09.09.2026
approved
dealer
item-No.: 169117470

used

Location: Land-de
Price: 180 €

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, dual power supply -Type: AC1212 -Number: 1x module available -Price per piece -Dimension: 120/110/H135 mm -Weight: 1 kg/pc.

Category: 2100 electrical parts
Latest update: 18.05.2026
approved
dealer
item-No.: 164485690

used

Location: Land-de
Price: VB 105 €

SIEMENS SITOP power 40

Category: 1101 power generators / Block combined heat and power stations
Latest update: 09.06.2026
approved
dealer
item-No.: 169660305
New in: 2008

used

Location: Land-de
Price: 2.500 €

Key data: 4 KW, 400 V

Vaillant Gas Generator (mini-CHP) Eco-Power 4.7 Natural, bio or liquefied gas electricity and heat generators from 2008, unknown operating hours, Engine defective. 4.7 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Vaillant Model: Eco-Power 4.7 Type: mini natural, bio or liquefied gas CHP Serial number: 210801336006 0089000249N1 Power [KWel]: 1.5 – 4.7 Power [KWth]: 4.7 – 12.5 Current [V]: 400 Frequency [Hz]: 50 Year of Make: 2008 Operating hours: unknown Weight unit [kg]: 300 Dimensions LxWxH [m]: 1.20 x 0.80 x 1.25

Category: 836 post press: other
Latest update: 16.05.2024
approved
dealer
item-No.: 67816
New in: 1999

used

Location: Land-de

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Category: 821 pre press: imagesetter and CTP
Latest update: 16.09.2024
approved
dealer
item-No.: 8888912

used

Location: Land-de

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

Category: 821 pre press: imagesetter and CTP
Latest update: 18.03.2025
approved
dealer
ankerimg
item-No.: 8888938
New in: 1998

used

Location: Land-de

Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and is out of a well working AccuSet. Available: on stock

Category: 821 pre press: imagesetter and CTP
Latest update: 18.03.2025
approved
dealer
ankerimg
item-No.: 8888946
New in: 1996

used

Location: Land-de

AGFA Powersupply for Avantra 36 and Avantra 44 Available: now

Category: 1108 spare parts
Latest update: 02.02.2026
approved
dealer
item-No.: 73367453

used

Location: Land-de

Cockpit, instrument panel with Lenkorbitrol, ads, steering wheel and Horn button etc. More components from various machines available, hydraulics, engines etc.

Category: 824 pre press: software
Latest update: 01.01.2025
approved
dealer
item-No.: 152677321
New in: 2006

used

Location: Land-de

Category: 835 post press: stitchers
Latest update: 01.01.2025
approved
dealer
item-No.: 152677640

used

Location: Land-de

Category: 2100 electrical parts
Latest update: 25.05.2021
approved
dealer
item-No.: 153127490

used

Location: Land-de
Price: 476 €

Category: 2100 electrical parts
Latest update: 25.05.2021
approved
dealer
item-No.: 153127512

used

Location: Land-de
Price: 119 €

Category: 2100 electrical parts
Latest update: 25.05.2021
approved
dealer
item-No.: 153127624

used

Location: Land-de
Price: 476 €

Category: 836 post press: other
Latest update: 16.05.2024
approved
dealer
item-No.: 121697330
New in: 1997

used

Location: Land-de

Built 1997 Mechanical power 24,000 c/h Format main product max 96-120 pages min 4-8 pages format supplement max 96-120 pages Equipment o opening station with suction cup and sword o 2 main product feeder o 8 insert feeder o 7 bar feeder AF-200 o delivery coupled with o crosser CN-25; ready for operation

Category: 2100 electrical parts
Latest update: 01.04.2025
approved
dealer
item-No.: 142938436

used

Location: Land-nl

Busbars for any shipbuilder or re-fit project. Produced following the highest European standards and availability rate FOR QUOTATION: INFO@AMP-POWER.NL Maximum Voltage 300 V AC/ 48V DC Number of terminal studs : 4 / 8 Terminal Type : 16 Stud Terminal stud torque : 15.82 Nm Continuos Rating : 545A AC / 600A DC Base Material: Reinforced Polycarbonate Bus Material : Tin-Plated Copper CDA 11 /UNS11000 Weight : 0.79 kg / 1.25 kg

Category: 1102 engines / Diesel engines
Latest update: 01.04.2025
approved
dealer
item-No.: 145132566
New in: 2019

used

Location: Land-nl

CUMMINS C110D 2 - 110 KVA BRAND NEW

Category: 209 other wood working machines / Chip exhaust installations
Latest update: 29.05.2026
approved
dealer
item-No.: 145265698

new

Location: Land-pl
Price: 4.405 €

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Category: 108 welding machines / Spot Welding Machines
Latest update: 22.10.2025
approved
dealer
item-No.: 152835920
New in: 2021

new

Location: Land-de
Price: 720 €

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Category: 108 welding machines / Spot Welding Machines
Latest update: 22.10.2025
approved
dealer
item-No.: 152835921
New in: 2021

new

Location: Land-de
Price: 1.150 €

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Category: 107 sheet metal working / CNC Bending Machines
Latest update: 21.04.2026
item-No.: 153960648
New in: 2018

used

Location: Land-uk

Max Bending Length 2250mm Machine is in excellent condition - As New LOW HOURS

Category: 107 sheet metal working / CNC Punching Machines
Latest update: 21.04.2026
item-No.: 153960696
New in: 2007

used

Location: Land-uk

Large Format 3000 x 1500mm With Automation Siemens 840

maximum number of results exceeded
please refine your search

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information