power machine used for sale

Ilpra Tray sealer Model: Speedy H240 Serial: FP9858 2014, stainless automatic inline tray sealer, previously used for sealing 250mm diameter tubs, two filling heads on infeed section, with HMI screen controls, 3Ph

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet

Cake cutting machine Krumbein KSSM V3,0 D used automatic cake cutting machine from Krumbein KSSM V3,0D for 60cm wide sheets for sale immediately available in stock. The machine cuts long and cross, knives are removable for cleaning. -Krumbein cake cutting machine -with digital control -380 Volt 3Ph 50 Hz 16 A

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg

Furnace 650 inner 1x1x2m t max 650C PLC could be various size Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen

The name mentioned is technical specifications for a C-bracket used as an accessory for Tucker stud welding systems (from Stanley Engineered Fastening). These brackets are usually used on automated welding heads or manual welding guns to generate the back pressure during the welding process. Technical Breakdown The letters and numbers describe the geometric dimensions of the C-bracket: a 150: Usually stands for the projection (depth) of the bracket of 150 mm. e 220: Refers to the opening width (internal width) between the legs of 220 mm. d 60: Usually refers to the diameter or thickness of the bracket material or the holder (60 mm). m 212115: This is the manufacturer's specific material number or article number for the unique identification of the spare part. Bossard Bossard +1 Application area These C-brackets are part of the Tucker SWS (Stud Welding System). They are mainl ...

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

EvoPac VOLTA WINDOWS window and door wrapping machine was built in 2020 in Italy by EvoPac S.r.l. The machine is used for wrapping windows and doors of various dimensions with stretch film. Such protection minimises the risk of damage to the load during transport, as well as protects it from weather conditions. High performance, combined with state-of-the-art technical solutions, makes it a great solution for companies specialising in the manufacture and transport of windows and doors. The process begins with the loading of the product onto a turntable with an integrated roller conveyor. The pneumatic grippers, controlled by a foot switch, automatically adjust to the size of the product, thus ensuring high process stability. The stretch film is unwound simultaneously with the rotation of the work table and the load placed on it. At the end of the cycle, the EvoPac VOLTA WINDOWS automa ...

Ref.Nr 00682 Designation of the machine grinding machine / calibration machine Manufacturer Ferrari & Cigarini s.r.i. Model Calibratrice Built in 2012 Current Use To Grind Flow Surface or reduce the height of the workpiece 67.9 kW 400 V- 50 Hz 3 + 6 Bar 4700 kg Delivery date by appointment

Tech. Data and more info on request

ECKERT AGAT SPEED oxy-fuel cutting machine was built in 2020 in Poland by ECKERT AS Sp. z o.o. The machine is used for thermal cutting of workpieces with a maximum thickness of 100 mm. The machining process is performed by means of a reliable oxyfuel torch according to pre-programmed cutting programmes or by manually controlling the cutting path. Workpieces machined in this way stand out for their perfectly smooth and even edges, regardless of the type of material. The open design of the machine, on the other hand, ensures free access to the work area from all sides, as well as excellent stability during even the most demanding challenges. The AGAT SPEED oxyfuel cutting machine is offered with an extensive equipment, consisting of, among others, the ECS 872 intelligent CNC controller and an oxygen torch support with capacitive distance sensor. Technical specifications of the ECKERT AG ...

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

955LE CNC tube bending machine The machine was never working – only a few samples at the beginning. The year of production is 2015. Price +/ - 200.000,-- EUR (EXW). (Price of this NEW machine is now more than 300.000,-- EUR) alternative: another Type BMR 65 The package includes the bending machine, a KUKA robot, a pipe magazine, a material chute and a safety fence. Attached I am sending you some photos, including some from the last inspections, which describe the current status. You are welcome to visit the equipment on site.

Control Fanuc 32i-TB Main spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 7.5 kW Bar passage 38 mm Travel in Z (longitudinal turning operation) 320 mm Workpiece Clamping Collet Chuck (Type F48) Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 5.5 kW Workpiece Clamping Collet Chuck (Type F48) Pneumatic ejector Linear slides: Number of lathe chisel stations 5 Tool holder 16 x 16 mm/ 20 x 20 mm Number of stations cross drilling rig 5 Tool holder ER16/ER20 Tool drive 6,000 rpm, 2.2 kW Cross slide: Number of stations 2 Tool holder ER16 Milling operations tool drive Residual apparatus: Number of stations 8 Tool holder Ø32 mm Number of driven stations 4 Tool holder ER16 Tool drive 6,000 rpm, 1 kW Equipment/accessories: Chip Management Chip Conveyor Coolant system IKZ syste ...

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

BaumannPerfecta 115 Age: 2022, installed 12/2022 Available: April 2026 • 24" tiltable color display touch screen • Process visualization, real time Animation and displaying half and full finished jobs • Program steps in self‐explaining list • Electronically adjustable backgauge speed and clamp pressure • Automatic clamp pressure adjustment • Pre‐selectable clamping time extension‐ 0 to 9,9 seconds • Integration of Prepress data CIP3/CIP4 from existing customer workflow (option) • Structure of the surface in simple operating mode, list mode, graphic mode • Password protected user accounts • Comprehensive diagnosis / service area Cutting table width [mm] 1150 Rear table length [mm] 1150 Maximum clamp opening [mm] 165 Smallest cut/ with false clamp [mm] 20/77 Backgauge return speed [mm/s] 300 Cclamping force [kN] 2.5‐45 Safety p ...

Description Attachment of labeller BBK ESB with conveyor belt from 1996

Condition: Very good condition

AGIE CHARMILLES FORM 400 vP die-sinking EDM was built in 2012 in Switzerland by Agie Charmilles SA. The machine is used in the production of, among others, precision dies, punches and tools. Workpieces with a maximum weight of 3000 kg are machined by means of electrical erosion, which enables complex shapes to be made in even the hardest materials. Workpieces machined in this way also do not require other secondary processes to be undertaken, such as polishing. Extensive equipment is included in the offer price, consisting of, among others, an intelligent control system, a measuring probe and a special iQ module that minimises electrode wear. The AGIE CHARMILLES FORM sinker EDM weighs 7014 kg. Technical specifications of the AGIE CHARMILLES FORM 400 vP die-sinking EDM - number of axes: 4 (X,Y,Z,C) - feed in the X/Y/Z axis: 900/700/500 mm - work table dimensions (L x W): 1100 x 900  ...

ID3737 Nordmeyer on Unimog Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled in the last 3 years for approx. €40,000 (power swivel, hydraulic pumps, main gearbox for engine overhauled, new flushing pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled the last 3 years for about 40,000 euros (power turntable, hydraulic pumps, main gearbox for engine overhauled, new mud pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

GeneralUniversal Milling / Turning Machining Centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools63 Floor space/WeightWeight approx.18500 KgUniv. milling head w. controlled B-axis HSK-A 100Universal milling head with controlled B-axis HSK-A 100 (only with motor spindle HSK-A 100)NC milling/turning tableNC mill-turn table 1 x T-slot as cross slot 12 x T-slots as starslots / 22,5 ° with integrated balancing sensorCoolant supply ICSCoolant through spindle centre form AD, 40 bar/23 l/min Multi-jet unit at milling head, switchable from coolant ...

Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric  ...

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

Double door pharma grade washer incl. conrol panel Siemens, type Simatic 087. Washer is CE-marked.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...

Plegadora

large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm

Refurbished machine 3000 x 1500mm Laser: 5000w

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041