141,784 used machines on RESALE, but how to find them? Machine Search
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, DC Power Supply -Type: PSL C242 -Power: 38 VA -Dimensions: 80/55/H110 mm -Weight: 0.8 kg
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U75024 -Power: 750 VA -Dimensions: 225/175/H215 mm -Weight: 17.3 kg
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U1K224 -Power: 1200 VA -Dimensions: 250/175/H215 mm -Weight: 19,2 kg
Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg
Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Eltako, Wide-range switching power supply -Type: WNT12 -Quantity: 1x switching power supply included -Dimensions: 90/75/H60 mm -Weight: 0.2 kg
Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used
Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.
Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.
Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact, Power Supply -Type: CM 90-HP-230AC/24DC/2 -Item no.: 29 43 70 9 -Quantity: 2x power supply available -Price per piece -Dimension: 145/90/H80 mm -Weight: 2.3 kg/pc.
Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 20A, 960W -Type: XT40.481 -Number: 1x module available -Dimensions: 160/95/H135 mm -Weight: 1.5 kg
Converter, power converter, power supply, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply, power supply module, power supply module -Manufacturer: Puls, Power Supply 3-Phase, 48V, 10A, 480W -Type: QT20.481 -Number: 1x module available -Dimensions: 130/65/H130 mm -Weight: 0.9 kg
Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Puls, Power Supply -Type: CPS20.241 -Input: 100-240V single-phase input -Output: 24V 20A -Number: 37 modules available -Price: per piece -Dimensions: 125/65/H130 mm -Weight: 0.9 kg/pcs
Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Puls, Power Supply -Type: CP10.241 -Input: AC 100-240V / DC 110-150V -Output: 24-28V 10A -Number: 6 modules available -Price: per piece -Dimensions: 115/40/H125 mm -Weight: 0.6 kg/pcs
Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Omron, Power Supply -Type: S8VK-C12024 -Input: 100-240V 50/60Hz 2.6A -Output: 24V 5A -Quantity: 1 module available -Dimensions: 120/40/H130 mm -Weight: 0.6 kg
Power Products AM-5 RF Impedance Adapter 500W @ 13.56MHz Auction-ID: A1-51157-10
For sale we have a used Volvo generator set in a very good condition. Manufacturer : Atlas Copco Model : QAS 275 Power : 220KW/275KVA Engine: Volvo 6 cylinder turbo diesel Generator: Leroy Somer Year of construction :2011 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-51485-8
Equipped with: input 100–240 VAC 50–60 Hz, output 9 VDC 0.66 A, suitable for power supply of 1–12 CVD-Touch and/or infrared sensor electronics and SSC/SWS-compatible fixtures, including adapter cable. Hidden AC adapter, dimensions: 50 × 47.5 × 25 mm Auction-ID: A1-47451-1758
Condition: Very Good Manufacturer : Genelec Model: GDW-400 T5 Power :320 KW /400KVA Engine: Doosan 8 cylinder turbo diesel Operating hours: approx. 100h ! RPM : 1500 U/Min. Frequency : 50 Hz Year of Make:2015 Complete with control Incl. approx. 4000 L diesel tank in the base frame! Auction-ID: A1-51485-5
Horsepower (hp) : 120 Drive wheels: 4 rm Gearbox: Semi-powershift 24/12 Front tires: 380/70r28 Front tyre wear: 20% Rear Tires: 540/70r38 Rear tyre wear: 20% Equipment: Charger Electro linkage Hydraulic inverter MP95 charger to faster + single lever 3rd function Auction-ID: A1-51489-48
Compal Power VG-R30 diesel generator 31 kVA / 25 kW Specifications: Brand: Compal Power Type: VG-R30 Rated power: 31 kVA / 25 kW Standby power: 37.5 kVA / 30 kW Voltage: 400/230 V Number of phases: 3 Frequency: 50 Hz Current: 54.1 A Power factor: 0.8 Speed: 1,500 rpm Operating Classification: Continuous Engine type: diesel Alternator: Three-phase Production date: 01-2026 Number: LB2601145-440 Features: Sound-insulating canopy Zhongling Digital Control Panel Manual and automatic operation Emergency stop CEE Connectors Starter battery Integrated fuel tank CE marking Auction-ID: A1-47397-657
Devol Power VG-R30 diesel generator 31 kVA / 25 kW Specifications: Brand: Devol Power Type: VG-R30 Rated power: 31 kVA / 25 kW Standby power: 37.5 kVA / 30 kW Voltage: 400/230 V Number of phases: 3 Frequency: 50 Hz Current: 54.1 A Power factor: 0.8 Speed: 1,500 rpm Operating Classification: Continuous Engine type: diesel Alternator: Three-phase Production date: 01-2026 Number: LD2512288-069 Features: Sound-insulating canopy Emergency stop CEE Connectors Starter battery Integrated fuel tank CE marking Auction-ID: A1-47397-658
Salini Power VG-R30 diesel generator 37.5 kVA / 30 kW Specifications: Brand: Salini Power Type: VG-R30 Rated power: 37.5 kVA / 30 kW Standby power: 41.3 kVA / 33 kW Voltage: 400/230 V Number of phases: 3 Frequency: 50 Hz Current: 54.1 A Power factor: 0.8 Speed: 1,500 rpm Operating Classification: Continuous Engine Model: K4100D Alternator Model: 184H Production date: 08-2025 Number: LD2511288-54 Features: Sound-insulating canopy Zhongling Digital Generator Controller Emergency stop CEE Connectors Starter battery Integrated fuel tank CE marking Auction-ID: A1-47397-659
CHAUVIN ARNOUX - PEL 103 POWER & ENERGY LOGGER - SN 148148NLH Auction-ID: A1-51953-87
CHAUVIN ARNOUX - PEL 103 POWER & ENERGY LOGGER - SN 148153NLH Auction-ID: A1-51953-104
Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...
Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...
Auction-ID: A1-40422-71
Auction-ID: A1-40422-72
Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...
Various types and sizes In 1 metal basket. Auction-ID: A1-51283-54
used
5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately
used
R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately
Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement
used
R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately
used
used
4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately
used
R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately
used
refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately
used
used
Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...
used
Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...
used
Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately
used
R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately
used
Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...
maximum number of results exceeded
please refine your search
2.900 € 
