power machine used for sale

Incl. control panel and accessories

Condition: unused, in the original packaging Portable welding machine Adjustable current: 10-130 Ampere Electrodes: suitable for electrodes from 1.6 to 3.2 mm Ø Duty cycle: 25% Equipped with: LED display Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Function: electrode welding (MMA) Equipped with: "hot-start", "arc force" & "anti-sticking" function Features: Small size, lightweight, portable and easy to use Includes: manual

Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration.

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories

Serial number: 532053 Operating voltage: 3 x 380-420 V Frequency: 50 Hz Rated current: 7.4 / 10.0 A Grinding wheel diameter: 250 mm Table dimensions: 210 x 200 mm with attached clamping system Jaw width: 80 mm Training workshop part 2 - Lot 18

Serial Number: 69375 Type: Cylindrical grinding machine between points Equipment: Fixed and movable headstock, grinding wheel Status: Used machine with signs of wear and corrosion Additional information: Manual control with control panel

Punching machine with trump tool holder, back gauge via adjustment wheel with display Working area: approx. 1000 × 500 mm Max. sheet thickness circa. 6 mm steel control voltage: 220 V-required fuse for the machine is 16 Weight: approx. 2000 Kg

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Featured. Earth cable clamp; Reducing valve; Air Cooled Weld Toots

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

In-line drilling machine Height adjustable 3150 - 18 000 rpm Year of manufacture 1960 1600 - 9000 rpm BJ 1665 Chuck 0 -6 mm Chuck 0 - 4 mm 16 A 380 V

table Ø 550 mm; Equipped with roller conveyor

Machine number: 0102 Operating voltage: 230 V Frequency: 50 Hz Connection: 100 W Pressure: 0.8-5 bar Internal dimensions: 580 x 500 x 300 mm Reference: Lotec - Lot 222

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Belt width: 65 mm incl. whetstone, diameter: 110 mm

Equipped with: adjustable drilling table

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

mc-80 a, 2x Horizon COLLATOR mc-80 m, SPF 20

Thermo Relief Machine, 15 ́

Standard, 2 drilling heads

Tapping machine, drilling and tapping

Equipped with fuse; 3 Allen keys; carrier strap; 3 handles; Drilling capacity: 35 mm; Drilling depth: 210 mm; Speed: Up to 830 rpm; Adhesion: 16000 N; Power: 1600 kW; Connection: 230 V; Automatic cooling system; Unused in box

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;

Grinding diameter: 200 mm Reference: Geuder - Lot 7

Horizontal milling machine - Incl. partial table x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Table width 270 mm Spindle speeds 40 - 960 rpm Spindle holder SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Condition: unchecked (6)

1 drilling head

Standard, 2 drilling heads

Size: 570 x 330 x 60 mm, speed: 1.600 c/h, 8 clamps, hotmelt spine gluing unit, hotmelt side gluing unit, milling and roughening station, cover station, pressing station, delivery

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm

Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel

Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz  

SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm

Maximum welding power 104 kVA Arm spacing 100 - 500 mm Projection 500 mm Air pressure 60bar

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Gear milling machine Micron 106 16 A 380 V

Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

Weibert W7-32 5-fold station wagon Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=220mm 3 motors 3kW Price 5967,-€ excl. VAT Price 7100,-€ incl. VAT

Weibert W7-32 Profi 5-fold station wagon Planer width: 320mm Cutting length 2100mm Milling stop for tool max. D=220mm 3 motors 3kW Price 6975,-€ excl. VAT Price 8300,-€ with VAT.

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.