power machine used for sale

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

2 Head Stapling Machine Year: ca. 1987

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg

Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg

Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"

Control panel Pacmation made of Uhlmann C130 YOC 1996

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

Size: 320 x 450 mm

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished

6 Pockets, 2 Knives

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm

Sales Description ------------------- This large CNC axis drive spindle originates from a high-precision gantry-type milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of approximately 367 cm and a robust construction designed for heavy-duty machining, it is ideal for machine builders, retrofit projects, and industrial users seeking a reliable, ready-to-install spindle unit. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate delivery. Transport organization can done by IBA - the costs to be paid by the customer. Further detail information are provided in the attached datasheet as PDF-File. -------------------------------------------------------------------- Sales description This large CNC final drive spindle comes from a high-precision gantry milling machi ...

SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg