power machine used for sale

Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Screening machine large, Terra St used, overhauled

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Folder Gluer (folding carton gluer)

Folder Gluer (folding carton gluer)

Ref.-No. 10009-20-1276 Table Laser Designation of the attachment marking laser SAL 22 Manufacturer SH-Made in Germany Model SAL22 Year of construction NEW Compact ALL-in-One table machine for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 110x110 mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300 mm • marking height approx. 110 mm • Working range approx. 390x240mm • Welded construction made of sheet steel • Connection 230V • Air-cooled • Notebook with cable, Windows 10 (German or English) • Dimensions: 670x 430x 700 mm (LxWxH) • Weight: approx. 55 Kg

Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included

Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...

Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

It has 3 units, built in 1998

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools