128,231 used machines on RESALE, but how to find them? Machine Search
Output voltage 32V 20A, Auction-ID: A1-45526-10
2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover ...
Equipped with 6x Bals type 57116 power distributors Auction-ID: A1-41992-80
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Key data: 206 KW, 500 kVA, 400 V
Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018
Power test chamber with transformer transformer Input - primary 400 V three phases Output - Secondary Switchable - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases Power 50 KVA Space requirement W - 800 x D - 400 x H - 2,000 mm Weight approx. 430 kg
Key data: 2400 KW, 400 V
CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Key data: 65 KW, 400 V
Buderus Gas Generator (CHP) E 0826 DN-60 Gas electricity and heat generator from 1998 with 41,972 operating hours, closed unit, generator with voltage fluctuations. 1 available 65 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Buderus Model No.: E 0826 DN-60 Type: Gas CHP Serial number: 03198-00020-283 Power [KWel]: 65 Power [KWth]: 110 Engine: MAN E0826 E301 Year of Make: 1998 Hours: 41,972 Weight unit [kg]: 2,100 Dimensions LxWxH [m]: 3.10 x 1.00 x 1.75
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Key data: 800 KW, 400 V
CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...
2. Other and Auxiliary Systems - SNA-15. Low Voltage Control Technology Switching and control systems Siemens / AEG, system-related, Built: 1991 (Main distribution / Cabinet systems) Manufacturer: Siemens, 8PU:011, 30 fields NS switchgear combination (Motors, shunting distributions, etc.) Technical Data: - 6 relay cabinets - 2 PLC cabinets - 2 converter cabinets for fire extinguishing pumps - NS fuse outputs, etc. Find more here - / Contact us at -
Attention: Comes without battery! Auction-ID: A1-45825-5
Attention: Comes without battery! Auction-ID: A1-45825-9
Attention: Comes without battery! Auction-ID: A1-45825-3
Key data: 200 KW, 225 kVA, 400 V
1 emergency generator with Deutz diesel engine and Siemens generator, Power 225 kVA = 200 kW, 400V/3PH/50Hz, Start with 20 bar compressed air, complete with 2 pressure vessels and matching compressor, approx. 1,000 operating hours, still completely operational
Key data: 3 KW, 11000 V
Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...
Key data: 3600 KW, 4600 kVA, 6600 V
We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame
Attention: Comes without battery! Auction-ID: A1-45825-4
in stock on pallet Auction-ID: A1-45790-124
in stock on pallet Auction-ID: A1-45790-123
description: Here we offer a whole range with different Siemens SITOP power supplies. It is possible to buy the entire range, but also parts of this range can be purchased. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements wihtout guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services a ...
Attention: Comes without battery! Auction-ID: A1-45825-6
Attention: Comes without battery! Auction-ID: A1-45825-2
Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Attention: Comes without battery! Auction-ID: A1-45825-8
Pick up in 2580 Putte Auction-ID: A3-43515-10657
in stock on pallet Auction-ID: A1-45790-126
in stock on pallet Auction-ID: A1-45790-122
Attention: Comes without battery! Auction-ID: A1-45825-7
untested, without loading aids Attention 110V material
Equipped with Finn Power CS30 plate storage & automatic destacking system Including large batch of tooling, in 3 cabinets Capacities and specifications: see photos Including manuals To be disassembled and loaded by buyer
Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box
Equipped with IGBT inverter with high duty cycle; mains voltage 400 V / 50 Hz, 3 phase; Output current 40-350 A; duty cycle 80%; welding wire diameter: 0.8-1.2mm; recommended sheet thickness: 0.5-12mm; wire feeding: 4-roll; synergy mode; double pulse function; VRD; 2T/4T function; memory; 5 languages; New in box
with LF24 wire feed, with various accessories
-Accessories accessories -New -No documents Auction-ID: A3-43515-30069
maximum number of results exceeded
please refine your search
20 € 
