129,249 used machines on RESALE, but how to find them? Machine Search
Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mai ...
Data sheet of retrofit POS. GE 10.10 Roller conveyors, FB = 550 mm Gebhardt, 7,000 mm = FL Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 7,000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 7000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...
Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...
Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
Key data: 68 KW, 85 kVA, 400 V
PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE ...
Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,
Key data: 537 , 400
Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...
Key data: 9000 , 11000
Wartsila 20V34SG Gas Power plant 8.7 Mw 50 Hz 11kV 8.7 Mw at 750 RPM 2004 made in good condition Available in Turkey
Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...
Key data: 10000 , 12000 , 11000
Wartsila 1 x 20V34SG complete power plant 9.7 Mw at 750 RPM 50 Hz 11 kV and 12000 KVA total 1 unit 20V34SG generating set with ABB AMG 1120LT08DSE alternator Year of make is 2011 39.000 Running hours. In good, running condition
Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...
Key data: 48 KW, 60 kVA, 400 V
PTO generator 60 kVA and with switch, field and house operation for IT & TN network and insulation monitoring Technical Data Generator: Generator manufacturer: Endress Generator Type: PRO18L G/4 60KVA Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.8 Speed: 1500 rpm New PTO generator 60 kVA – Brushless with electronic voltage regulator AVR – Synchronous – Switchable between field and home operation (TN / IT network) with insulation monitoring in protection class IP 44 according to CE (2006/95 EC) TN network for feeding into a building according to VDE 0100-551 Supplement 1 with 1h coded socket. Sockets for Field Operation – IT Network with Insulation Monitoring 230 Volt Schuko / 16 Ampere yes 230 Volt CEE 6 H/ 32 Amp. -/- 400 Volt CEE 6 H /32 Amp. yes 400 Volt CEE 6 H / 63 Amp. ...
UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy
Soco Powered roller conveyors roller conveyor 1980-670-610 RA2021 Make: Soco Roller width (RB): 610mm, Rubber rolls Nominal/outer width (NB): 670mm length: 1980 mm Rolls diameter: 50 mm Roller distance 60790/120 mm Overall height frame: 180 mm Drive: Nerimotori Power: 0.37 kW Scope of delivery: without supports Motor segments can be combined with overdrive segments, so one motor can be used to drive several overdrive segments. Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: Nerimotori KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung s ...
Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers
We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...
Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel
Indramat Power Supply-----Power supply Type CO 1.3-100-220
Key data: 1558 KW, 2300 kVA, 400 V
Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.
Key data: 22 KW, 27 kVA, 400 V
For sale is a Mephisto G22 combined heat and power plant with 22 kW nominal electrical output. The plant has only been in operation for a few years, has a comparatively short running time and still has many remaining production hours. Technical data (version of mains-parallel operation): 22 kW electrical power approx. 27.5 kVA apparent power 400 V, 3-phase, 50 Hz The CHP plant has been regularly serviced and is in good condition. Further technical documents and operating hours are available on request. This includes both a pump group and 2 buffer tanks. The device is no longer used due to renovation and was hardly operated over the years.
Key data: 2500 KW, 10500 V
New industrial gas generator set based on MTU Series 4000 engine. Designed for reliable continuous power generation in industrial facilities, CHP plants, and energy projects. Key specifications • Engine: MTU 20V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 2500 kW • Frequency: 50 Hz • Speed: 1500 rpm • Configuration: V-20 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Energy projects and microgrids Condition: New Availability: On request Location: Europe Contact for detailed technical documentation and price PM: infobscgroup.eu
Key data: 2000 KW, 10500 V
New industrial gas generator set based on the MTU Series 4000 engine platform. Designed for reliable continuous power generation and combined heat and power (CHP) applications. Key Specifications • Engine model: MTU 16V4000 L64 FNER • Fuel: Natural gas / biogas • Electrical output: approx. 2000 kW • Speed: 1500 rpm • Frequency: 50 Hz • Configuration: V-16 gas engine • Electrical efficiency: up to 44 % Applications • CHP power plants • Industrial power supply • Data centers • Distributed energy systems and microgrids Condition: New Availability: On request Location: Europe Contact for price, delivery time and detailed technical documentation PM : infobscgroup.eu
Key data: 2300 KW, 10500 V
High-efficiency industrial gas generator set based on the proven MWM TCG 3020 V20 engine platform. Designed for reliable continuous operation in power generation and combined heat and power (CHP) applications. The unit offers high electrical efficiency, long maintenance intervals, and excellent fuel flexibility, making it suitable for natural gas, biogas, landfill gas, and other gaseous fuels. Key Specifications • Engine model: MWM TCG 3020 V20 • Configuration: V-20 gas engine • Electrical output: up to 2300 kW • Rated speed: 1500 rpm • Frequency: 50 Hz • Fuel type: Natural gas / Biogas / Landfill gas • Electrical efficiency: up to 45 % • Total efficiency (CHP): up to 87 % Technical Highlights • Proven MWM TCG 3020 series engine platform • Long service intervals (up to 80,000 operating hours overhaul interval) • Optimized for high-effi ...
Key data: 790 KW, 738 kVA, 400 V
Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513
Key data: 1500 KW, 400 V
New industrial gas generator set based on the reliable MTU Series 4000 engine platform. Designed for continuous power generation in industrial facilities, CHP plants, and distributed energy projects. Key Specifications • Engine: MTU 12V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 1500kW • Frequency: 50 Hz • Speed: 1500 rpm • Engine Configuration: V-12 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Distributed energy systems and microgrids Condition: New Location: Europe Availability: On stock Please contact us for price, detailed technical documentation, and delivery conditions. PM : infobscgroup.eu
new
Key data: 3 KW, 4 kVA, 10000 V
Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...
Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900
used
Key data: 75 KW, 400 V
Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The ...
Out-of-the-box recovery connections can be created with the HPE 1950 Switch Series using the Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards. Key connections are distributed across multiple units in a logical stack for greater resiliency. Sold as a complete package with the following components: 1x HPE Office Connect 1950 JG961A 24-Port (PoE) 2x HPE Office Connect 1950 JG962A 48 port (no PoE) 13x HPE Office Connect 1950 JG963A 48-port (PoE) 10x HP A-RPS1600 JG136A Power Supply
- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).
in stock on pallet Auction-ID: A1-45003-123
1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...
in stock on pallet Auction-ID: A1-45003-124
in stock on pallet Auction-ID: A1-45003-122
in stock on pallet Auction-ID: A1-45003-126
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/12DC/5 Ord.No.: 2866475 -Input: 100-240 V -Output: 12 V -Cardboard dimensions: 185/175/H50 mm -Weight: 0.6 kg
Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg
Key data: 330 , 413 , 400
Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg
Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.
4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg
maximum number of results exceeded
please refine your search
300 € 
