133,687 used machines on RESALE, but how to find them? Machine Search
Lot 58: Fully Automated Forging Hammer Line (2023) SCHULER KG H 6.3 B (63 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold conveyor belt Conductive Heating System, Stahlmann, E89, 2023 Transfer Gripper Hot Conveyor Belt with Lifting Device 2 Forging robot, Kuka, KR 30-3F, 2010 Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Schuler, KG H 6.3 B, 2023 Discharge / Extraction Robot, Kuka, KR 150/2, 2010 Output Station, Stahlmann, 2010 Technical Details (2023) Short-Stroke Die Forging Hammer SCHULER KGH 6.3B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 6.3B Machine number: 119820 Year of manufacture: 2023 Operational parameters Working capacity max. 63 kJ Max. impact frequency 98/min Max. usable impa ...
Key data: 5600 kg, 810 mm
Lot 54: Fully Automated Forging Hammer Line (2009) LASCO HO-U 800 (80 KJ) The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Induction heating unit, ABP, EBS 345-W, 2009 Quick-release conveyor Automation unit, Lasco, 2009 2 Forging robots, Kuka KR 30-3F, 2013 2 Bases, weight each: 336 kg Conveyor belt with lifting device, safety enclosure with doors Top pressure drop forging hammer, Lasco, HO-U 800, 2009 Picking robot, Kuka, KR 150/2, 1998 Dispensing station, consisting of: Discharge conveyor and blow-off control, Manufacturer Schramm Technical Details (2009) Short-Stroke Die Forging Hammer LASCO H-OU 800 Machine identification data Name: Short-Stroke Die Forging Hammer Model: HO-U 800 Machine number: 00.08175 Year of manufacture: 2009 Operational parameters Working capacity ...
Key data: 3700 kg, 775 mm
Lot 55: Fully Automated Forging Hammer Line (2004) BECHE KGH 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Conductive heating system, Stahlmann, D400G21/39000 XSH, 2004 Frako reactive power compensation Automation system, Lasco, 2009 2 Forging robots, Kuka, KR 30-3F Conveyor belt with lifting device Control cabinet with higher-level control system Short-stroke drop hammer, Beche, KG H 5.0B, 2004 Discharge robot for removal, Kuka, KR 30/2, with bucket, 1999 Technical Details (2004) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5.0B Machine number: 155002 Year of manufacture: 2004 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable impact rate 55/min ...
Key data: 3700 kg, 775 mm
Lot 54: Fully Automated Forging Hammer Line (2002) BECHE KG H 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step conveyor, Stahlmann Cold Belt Conveyor with Lifting Device Conductive Heating System, Stahlmann, E89, 2019 Heated Conveyor Belt Forging Robot, Lasco / Kuka, KR 60-3F, 2019 Central Control Cabinet Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Müller Weingarten (Beche), KG H 5B, 2002 Extraction robot, Kuka, KR 60-3F, 2019 Discharge station, Stahlmann Technical Details (2002) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5B Machine number: 127050 Year of manufacture: 2002 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. us ...
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg
Skjold hammer mill with 7.5 kw, Sieve ø 515 x 70 mm Perforation ø 2 mm 12 bats, Inlet ø 80 mm, outlet ø100/90 Operation with extraction required We offer overhaul and reconditioning in our specialist workshop according to customer requirements!
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg
Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg
Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg
Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg
Hammer drill, drilling machine HILTI TE 54 ( TE54 ) drilling capacity steel: 13 mm drilling capacity concrete: 52 mm 230 / 480 rpm 900 W 230 V with case Dimensions: 600 x 400 x 140 mm
Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses
HEBÖ LH50 power hammer was built in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully operational. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ LH50 is a professional power hammer designed for hot metal forming in forges and workshops specialising in metalworking. It enables precise shaping of metal using powerful, repeatable hits, making it ideal for the production of, among others, ornamental bars and decoration elements. The impact strength of 50 kg is fully adjustable by the ergonomic foot pedal. The machine is also equipped with dies and a Vulcan plate. The HEBÖ LH-50 pneumatic forging hammer weighs 1150 kg. Technical specifications of the HEBÖ LH50 pneumatic power hammer - nominal dropping weight: 50 kg - number of hits: 220/min - hit stroke: 230 mm - Vulcan plate - ...
Key data: 150 kg, 480 mm, 375 mm
Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg
Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg
pressure: . t stroke: . mm total power requirement: . kW weight of the machine ca.: 3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
10.000 litre, Stock number: T3067, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, closed, Bottom: Dished, Tank cover: In the side, bolted, Ø 400 mm., Working pressure: 3 Ato, Inner diameter: Ø 1900 mm., Total height: H 4150 mm., Manufacturer: Chr. L. Hammerum & Sønner I/S, Year: 1973
6.800 litre, Stock number: T3984, Litre: 6.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, End bottoms: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: 650 x 850 mm, Agitator: Yes, Agitator type: Paddle agitator, Working temperature: 0/150° C, Working pressure double jacket: 3,5 bar, Inner diameter: Ø 1900 mm, Total height: H 2400 mm, Manufacturer: Hammerum Tullebølle A/S, Year: 2000
750 litre, Stock number: T3987, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Item: Transportation tank, Amount in stock: 9 pcs., Standing: On 4 pcs. legs with truck grip, Top: Conical, Bottom: Conical, Tank cover: On the top, Ø 400 mm, Inner diameter: Ø 940 mm, Total height: H 1680 mm, Manufacturer: Hammerum Tullebølle A/S, Model/type: FI 750
diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...
700 litre, Stock number: T2962, Litre: 700, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Flange for agitator at the top, Working pressure: 3 ATO, Inner diameter: Ø 790 mm, Outer diameter: D 950 mm, Total height: H 2215 mm, Manufacturer: Chr. L. Hammerum & Sønner I/S, Year: 1980
diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...
length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible.
Hyundai Demolition Hammer 1300W 20 Joule with 2 chisels Auction-ID: A1-40897-75
JCB 1700W Demolition Hammer | 21-DH1700 Auction-ID: A1-40897-544
BHR Hydraulic Hammer for Mini Excavator From 0.8 to 2 Tons Auction-ID: A3-46157-30468
BHR Hydraulic Hammer for Mini Excavator From 0.8 to 2 Tons Auction-ID: A3-46157-30469
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
Equipped with CW10 connection; Auction-ID: A1-47389-277
maximum number of results exceeded
please refine your search
15 € 
