power generators engines used for sale

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-31-020 -Quantity: 2 available -Price: per piece -Dimensions: 400/55/H310 mm -Weight: 4.9 kg/piece

Automation, PLC, switchgear -Type: KFD2-STC4-Ex1 -Manufacturer Part Number: 122580 -Number: 14x available -Price: per piece -Dimensions: 125/115/H20 mm -Weight: 125 g

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg

Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote Controller SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

Converter, power supply, power supply, switching power supply -Type: SL20.609 -Input: 3 AC 400 V 50-60 Hz 1.5 A -Output: DC 24 V/20 A -Number: 1x available -Price: per piece -Dimensions: 220/125/H117 mm -Weight: 1.7 kg

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Clamping angle: approx. 15° Driver: 30 x 30 mm two position sensors Pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C Pmax: 10 bar New ! Dimensions: 425 x 140 x 102 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Power Supply Card, Power Supply, Power Supply, Power Supply KNIEL Type: CG 24.1 ( CG24.1 ) A. No.: 110-001-02 Primary ( U in ): 230 V 1AC I in max.: 0.2 A Frequency: 45-66 Hz Secondary: 24 V DC 1.0 A New ! Dimensions ( Power Supply ): 191 x 128 x 40 mm Dimensions ( Package ): 220 x 160 x 88 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

pneumatic power clamp DE-STA-CO 82G50-103C004 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New !' Dimensions: 350 x 240 x 75 mm

Power converter, power supply, power supply unit, converter, servo power unit, frequency converter Manufacturer: SSB -Type: DDUS 06 E38 C5 -Quantity: 1 available Price: per piece -Dimensions: 250/205/H195 mm -Weight: 5 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

pneumatic power clamp DE-STA-CO 82G50-113C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Power supply unit, built-in power supply unit -Type: (DIN 41752) G24 G5/25WRGD -System: SVS2 -Current input: DC 24V -Current output: DC +5V/25A DC +-15V/0.3A -Dimensions: 270/80/H220 mm -Weight: 2.5 kg

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

pneumatic power clamp DE-STA-CO 82G50-114C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

power converter, power supply, power supply -Type: Sitop PSU300M -Input: 3AC 400 V -Output: DC24V/20A -Quantity: 77 pieces available -Price: per piece -Dimensions: 180/170/H90 mm -Weight: 1.3 kg/piece

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

pneumatic power clamp DE-STA-CO 82G50-153C000 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 160 x 75 mm