power generators engines used for sale

Key data: 2500 KW, 10500 V

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 10.5 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers

Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote Controller SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Clamping angle: approx. 15° Driver: 30 x 30 mm two position sensors Pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C Pmax: 10 bar New ! Dimensions: 425 x 140 x 102 mm

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Power Supply Card, Power Supply, Power Supply, Power Supply KNIEL Type: CG 24.1 ( CG24.1 ) A. No.: 110-001-02 Primary ( U in ): 230 V 1AC I in max.: 0.2 A Frequency: 45-66 Hz Secondary: 24 V DC 1.0 A New ! Dimensions ( Power Supply ): 191 x 128 x 40 mm Dimensions ( Package ): 220 x 160 x 88 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

pneumatic power clamp DE-STA-CO 82G50-103C004 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New !' Dimensions: 350 x 240 x 75 mm

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

pneumatic power clamp DE-STA-CO 82G50-113C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

pneumatic power clamp DE-STA-CO 82G50-114C006 SA-27144-76 8PW-023-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm

pneumatic power clamp DE-STA-CO 82G50-153C000 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 160 x 75 mm

Hydraulic power unit with gate gate pump ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U motor: 1,1,00 5 kW 940 rpm 220 / 380 V tank: 75 l as a spare part for Hohenstein RBT400 !' used, tested ! Dimensions: 920 x 430 x 780 mm

pneumatic power clamp DE-STA-CO 82G50-114C004 SA-21871-76 82E50-2F Max 30 V AC/DC Max 8 bar New ! Dimensions: 350 x 240 x 75 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

pneumatic power clamp DE-STA-CO 82G50-443C800 8PW-023-2 Max 30 V DC Max 8 bar New ! Dimensions: 350 x 180 x 75 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

pneumatic power clamp DE-STA-CO 82G50-411C800 8PW-023-2 Max 30 V DC Max 8 bar New ! Dimensions: 350 x 250 x 75 mm

Key data: 22 KW, 27 kVA, 400 V

For sale is a Mephisto G22 combined heat and power plant with 22 kW nominal electrical output. The plant has only been in operation for a few years, has a comparatively short running time and still has many remaining production hours. Technical data (version of mains-parallel operation): 22 kW electrical power approx. 27.5 kVA apparent power 400 V, 3-phase, 50 Hz The CHP plant has been regularly serviced and is in good condition. Further technical documents and operating hours are available on request. This includes both a pump group and 2 buffer tanks. The device is no longer used due to renovation and was hardly operated over the years.

Hydraulic Power Unit With Air Operated Hydraulic Pump GRACO FIRE-BALL pump: L83 6203876 Air motor: B84 6203963 Ratio: 5:1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

pneumatic power clamp DE-STA-CO 82L40-103C800 SA-26611 8PW-016-1 Max 30 V DC Max 8 bar New ! Dimensions: 260 x 180 x 65 mm

Hydraulic power unit WEHRDOHLER PUMPENFABRIK FMA 1/12 ( FMA1/12 ) P: 40 bar Q: 3.2 l / min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 590 x 550 x 500 mm

pneumatic power clamp DE-STA-CO 82E40-141C505 SA-26063-65 82E40-2F Max 30 V DC Max 8 bar New ! Dimensions: 290 x 125 x 45 mm

Hydraulic Power Unit with Gate Gate Pump ORSTA pump1: 10/16-1 TGL 10889 pump2: C2,5-2 L TGL 10885 motor: 1.5 kW 935 rpm 220 / 380 V Tank: 80 l used, tested ! Dimensions: 920 x 520 x 1350 mm

pneumatic power clamp DE-STA-CO 82E63-101C000 SA-27145-85 BPW-024-1 Max 30 V AC/DC Max 8 bar New ! Dimensions: 400 x 145 x 60 mm

Hydraulic power unit with two pumps HPE Q1 = 48 l/min p1 max = 90 bar P1 = 7,,P1 5 KW Q2 = 23 l/min p2 max = 80 bar P2 = 4 KW 400 V 200 l Tank used, tested ! Dimensions: 1700 x 1200 x 1650 mm

pneumatic power clamp DE-STA-CO 82E40-101C5R0 SA-26063-65 82E40-2F Max 30 V DC Max 8 bar with manual delivery !' New !' Dimensions: 280 x 150 x 90 mm

Hydraulic Power Unit FLUTEC PTOK-250 / 1.1 / M / R ( PTOK-250/1.1/M/R ) max: 100 bar max: 28 l/min with 100 liter tank pump with cooling 220 / 380 V motor: 3 kW IP54 used, tested ! Dimensions: 820 x 500 x 830 mm

pneumatic power clamp DE-STA-CO 8820-2X17 Max 8 bar New ! Dimensions: 170 x 30 x 45 mm

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

pneumatic power clamp, retaining clamp TÜNKERS PKS 63 HNM ( PKS63HNM ) 090.00 Beam angle: 90° New ! Dimensions: 370 x 80 x 105 mm