power generators 3 used for sale

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available -Price: per piece -Weight: 10 kg/piece

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UN62-00-2H -Price: per piece -Number: 1x available -Weight: 0.8 kg

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UA60 00-2X -Price: per piece -Number: 1x available -Weight: 0.8 kg

Sorfort available recon and used

Fine impact mill B 315 with 15 kW motor, newly mounted

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg

Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, No. of regulating wheel speeds: Infinitas, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203.2 x 500mm, Grinding wheel width: 500 mm, Maximum length to be rectified in plongeé: 500 mm, Grinding wheel head motor power: 75 Kw, Total power: 90 Kw, Voltage: 220/380V, Long: 2.300 mm, Width: 2.800 mm, Tall: 2.100 mm, Weight: 15.000 Kg

Gear motor, electric motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -without breaks -Dimensions: 650/280/H300 mm -Weight: 50 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 115 mm -Transport roller width: 380 mm -Total length: 420 mm -Shaft mount: 40 mm -Two-edge: 25 mm -Number: 4x rolls available -Price: per piece -Weight: 12 kg/piece

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Hight: 1420 mm, Weight: 4200 Kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm -Weight: 160 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg

Sorfort available used camshaft

Key data: 3000 W, 1500 , 1500

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 1.5kW Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine i ...

Muller Martini Perfect Binding Line, Equipped With: Endsheet Feeder, Perfect Binder: Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Book Block Feeder, Hot-Melt Spine and Side Gluing with Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Trimmer. Three Knife Trimmer: Muller Martini 3670 With Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour.

Listing ID: 22720 Brand: ZF Model:BW 361 Ratio: 5.5931A Power: 1143 kW 1530 hp 1800 Dry Weight :+/- 1480 kg Dimensions: 130 x 140 x 130 cm

Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Recording with: Slotted hole -Length (unit of measurement): approx. 300 mm - Fine-tuning -Quantity: 2 available Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg

LISTING ID 22696 BRAND: CATERPILLAR MODEL: 3508 B POWER: 746 kW 1600 RPM COMPLETE WITH PANELS AND ACCESSORIES

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg

Socket distributors, site power distributors, connection cabinet -Equipment -Circuit breaker -Main fuse -1x socket: 16 A -1x socket: 32 A -Schuko: 3 -Dimensions: 270/280/H340 mm -Weight: 8 kg

Inv. Num. : 7570 Type: TruMatic L 3030 Producer: TRUMPF Created: 2001 Parameters: Laser power: 1800 W Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 115 mm

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Recon Part Number: 555 200 08 01 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg

Listing ID: 22624 Brand: ZF 350 Model: 350 Power: 324 kW(435hp) 1800 rpm (CD) Ratio: 2,077:1 SN 20030818 Features: SAE Housing, Controls Mechanical ,Hydraulics ,Oil Filter HS Code: 84836080

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

BRAND: ZF MODEL: ZF 2555 RATIO: 2,333:1 POWER: 706 kW(960 hp) 1800 rpm Features: SAE-Housing: SAE-0, Flexible Coupling with Aluminum ring,Controls, Oil Cooler, Brackets, PTO Oil Cooler and Filters Aluminum Ring SN 50010644 HS Code: 84836080 NET WEIGHT 640 kg DIMENSIONS (cm) 90 x 120 x 90

MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459

Key data: 4200 kN

Machine in production !1

Plastic protectors, impact protection, bollards, polyamide -Solid material -Width: 123 mm -Length: 330 mm -Height: 82/50 mm -Drawing in the pictures -Number: 19 protectors available - Price: per piece -Weight: 2.4 kg/piece

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200

Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Guideway Grinding Machine Waldrich Coburg -30-10 S 3640 Control: Siemens 840D Year of Make: 2012 Travel: X-axis 8,825 mm Y-axis 3,010 mm Z-axis 2,500 mm Table length 8,000 mm Table width 1,800 mm Table load: 18,000 kg Feed X-axis: 1 - 45,000 mm/min Feed Z-axis: 100 - 3,000 mm/min Universal Grinding Head S10 with 110 Degree Tilt / 2500 Rpm / 7.5 kW Vertical Grinding Head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D controller on the left and right of the machine Automatic doors (4x) for easy access to the machine / load / clamping Hydraulic table drive with 18000 kg working load KNOLL HL650/4000 filtration system new 2023 Various grinding wheels Large Package Spare Parts/Ball Screws/Covers Renovation in 2012 for 1.5 million EUR