129,020 used machines on RESALE, but how to find them? Machine Search
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm
Bread packaging machine Hartmann VS 310 Series: M86/ 211L Year of construction: 12/1993 Weight: 850kg
For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
IMA VIALS LABELLING MACHINE, MODEL SENSITIVE 350 Year of construction: 2010 Labelling machine for vials and bottles. A simple design for effectively handling cylindrical containers. equipped with one side labelling head, for applying the label with high accuracy thanks to an appropriate spacing between the containers and an easy-to-regulate application group labelling unit is installed in the machine basement for direct access to the labelling reels supervision and monitoring of the process through a PLC with a user-friendly HMI TECHNICAL DATA Production details Bottle maximum height (mm): 220 Bottle diameter (mm): 16-78 Maximum output (pieces/minute): 350 Labels Label length (mm): 15-250 Label height (mm): 10-100 Label reel diameter (mm): 400 Label accuracy (mm): ±1 Electrical usage Standard voltage: 400 V – 50 Hz Installed power (kW): ...
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665
sheet width: 3100 mm plate thickness: 20 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2110009 Type of machine Shear Make DARLEY Type GS 3100/20 Build in 1987 Type of control Incl. electric guide sheet widht 3100 mm Plate thickness 20 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Please find herewith list of spares of Wartsila 32LN available for sale. Some photographs are attached for your ready reference. If you are interested in anyone, please inform us enable us to quote you in detail. 1) CYLINDER HEAD 2) PISTON 3) EXHAUST VALVES 4) INLET VALVE 5) WATER PUMP 6) INJECTION PUMP 7) HOUSING WITH BEARING and more Small Spares available
sheet width: 3000 mm plate thickness: 10 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Centrifugal pump Manufacturer: Hilge Type: Hygia II/30C Power: 11 kW Speed: 2930 rpm LBH: 650 x 400 x 410 mm
Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h
Used autoclave PANZER 340 liters with superheated steam -refurbished- - Control, cover seal, safety valve, pressure gauge, etc. all new. - For sterilizing, preserving, pasteurizing, cooking, curing, and aging. - Autoclave compl. made of high-quality stainless steels, lid with quick-release fastener. - The autoclave is equipped with all safety equipment. - The autoclave was manufactured in accordance with the latest requirements of the current pressure vessel regulation. - All safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain valve, safety outlet valve, etc. are of course installed. - The autoclave is subjected to a construction and pressure test by the TÜV. Corresponding certificates are included in the scope of delivery. - Fully automatic control by F-value controller including operating temperature, core temperature, F-value contr ...
Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h
ALL STAINLESS STEEL Hopper capacity : 300 l Two levels of hopper Two working shafts with paddles Front discharge of ready product in 200 l trolley Programming controller Power – 4 kW Machine dimensions in cm: Width: 95,0 Length: 154,0 Height: 156,0 Weight - 500 kg OPTION :Loading unit 200l trolleys: Column loader dimensions in cm: Width: 110,0 Length: 120,0 Height: 238,0 Column loader power 0,8 kW
SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...
DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...
Key data: 255 mm
Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...
LHS-Lagertechnik GmbH sells products for the warehouse technology sector. We offer new and used shelving systems, as well as used lifting and lifting equipment. In this ad, you will buy as follows: - Stacker trucks used - Manufacturer: Jungheinrich - Type: ERV 308 - Year of construction 2014 - Hours: 3828 h - Load capacity: 800 kg - Lifting height: 2630 mm - Overall height: 2000mm - Fork length: 1200 mm / Hydraulically extendable to 1880mm - Fork width min. 300 mm / adjustable to max. 690mm - Operating length: 2150 mm / incl. platform: 2550 mm - Operating width: 1270 mm - Battery: 24 volt built in 2014 - External 24 volt charger NEW UVV test Feature: Thrust Mast, Hydraulic Fork Extension, Cantilever Carrier, Mast Tilt, Tine Adjuster & Platform Sale without guarantee and warranty because used equipment Self-collectors welcome / Free loading / Shipping can ...
material dimensions max. round: Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg
bizhub C3100P = Equipment number: 1823718649 – Colour printer without additional accessories bizhub C3100P A4 printer with 31 ppm B/W and color. Standard Emperon™ Pressure Controller PCL, PostScript and optional XPS support. Paper capacity of 250 sheets and 100-sheet stacking sheet feeder. Standard duplex unit. 1 GB memory and Gigabit Ethernet standard. PF-14 Paper tray A4; 500 sheets; up to 90 g/m2 SCD-25 Base cabinet storage space for consumables HD-P06 Hard Drive1 320 GB Hard Drive 1 GB memory expansion 1 GB memory expansion for faster processes ID Card Reader1 Various ID Card Technologies LK-106 Barcode Fonts1 Printing Barcode Fonts LK-107 Unicode Fonts1 Printing Unicode Fonts LK-108 OCR A and B Fonts1 Printing OCR (A and B) Fonts LK-111 ThinPrint® Client Native ThinPrint Client SX-BR-4600 Wireless LAN Wireless LAN to Network Connection EH-C591 Staple Unit Sta ...
maximum number of results exceeded
please refine your search
