power generators 3 used for sale

Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

Sanyo MPR-311D(H) Medication Refrigerator 340l Safe, worry-free, cool storage of valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that that the setpoint temperature is maintained. Even if the door is opened and closed every now and then, the fans ensure rapid temperature compensation, to ensure highly reliable and stable storage conditions, on which the outside temperature has no influence. Equipped with digital temperature display A clear digital temperature display allows for quick visual inspection to the current operating temperature. To simplify visual temperature control, the temperature is measured in 1°C increments for a temperature range of 0°C to +15°C. Fan forced circulating air Thanks to the fan-forced recirculation system, the temperature is evenly distributed throughout the chamb ...

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

; Mileage [km]: 6; Power [PS]: 95

RUBBER BELT TROUGHED BELT BLASTING MACHINE WITH FILTER RUBBER BELT SHOT BLASTING MACHINE WITH FILTER Description: Rubber troughed belt blasting machine Manufacturer: Wheelabrator Year of Make: 2004 Type: MB 300G Band Type: Elastic Band Charge max. kg: 800kg Blasting wheels: 18.5kW Dump belt width: 1,200mm Max. filling volume: 300 litres Composed of: - Rubber troughed belt blasting machine type: MB 300G -Switchboard - Filter system - Discharge channel - Feeder Designation: Rubber Belt Shot Blaster Brand : Wheelabrator Type: MB 300G Belt Type: Rubber Belt Charge max. kg: 800kg Shot Wheel: 1 Pieces with 18,5kw Belt width: 1.200mm Fill weigth: 300 liters Consisting of: - Rubber Belt Shot Blaster Type: MB 300G - Main Panel -Filter - Outlet Vibro - Hydraulic Loader Price: Loading onto truck Price: Loading on Truck Warranty: 6 months functional and warr ...

Type: S 300 l 2P-V Complete stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 4.4 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of machine in cm: Width: 135 Lenght: 84 Height: 142 Delivery time: after advanced payment, one working day

Key data: 2 mm, 10 mm

Description KRAMATORSK CNC heavy lathe 1 K 671 320 F3 Details Type 1 K 671 320 F3 Year of construction 1988 (first commissioned in 1998) Turning length 10,000 mm Turning diameter over bed 2,000 mm (modified) Face plate diameter 1,950 mm Face plate clamping range 400 - 1,350 mm Speeds 1.00 - 140 rpm. Torque 125,000 Nm Main cutting force 130 kN max. Tailstock can be automatically swivelled in max. workpiece weight 70 to max. workpiece weight with steady rest 100 to Drive power 100 kW Number of bed tracks 4 Dimensions 22,000 x 6,200 x 2,900 mm CNC control SIEMENS 840D (2010 for 220,000.00 €) Support feed X-Z 0.3 - 4,000 mm/min. Support rapid traverse X-Z 4,000 mm/min. Dimensions inner cone 140 x 1:7 The machine is up to date with the CE directives incl. 2 steady rests, 1 roller block, 4 jaws, boring device very good c ...

Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.

CALEVA MODEL 380A STAINLESS STEEL SPHERONIZER REF.: E0013 Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet with local controls. General characteristics: Manufactured by CALEVA Model 380A Material Stainless steel Motor characteristics: Voltage 415 V Power 1.5 kW - 2 cv Frequency 50 Hz

Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The extrusion line is a COEX cast film line. Processing of thermoplastics in a processing range of 150-300°C. Possible layer structures: - Monofilms - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) Plant data: Total system output max. 2230 kg/h Extruder A: 90/33 L/D max. 330kg/h Extruder B.: 135/33 L/D max. 950kg/h Extruder C.: 135/33 L/D max. 950kg/h Film width NET: 1600 - 2110mm; Center cut for 2 bobsleighs possible (2x 800 – 2x 1055mm) Thickness: 25-580μm Production speed 10 - 150m/min Roll width 2500 mm roll weight 2000kg Additional components (quality): non-contact thickness gauge for automatic nozzle with automatic cross profile control on both sides Corona pretreatment (max. 12000W) Optical surface inspection system incl. defect marking in open and pass-through light Ancillary equipment: Dryer 1 – 4 with 4500 liters volume ; Heating capacity 48kw dryer 5 ...

Absorption dryers

IP 320 with feed belt outdated

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

Discover an exceptional opportunity to acquire a new and unused Siemens Steam Turbine, perfectly suited for high-efficiency power generation: - Voltage: 11kV - Frequency: 50Hz - Speed: 1500rpm - Blower: Howden SO2, powered by a Siemens motor with a robust 2200kW capacity. - Condenser: High-efficiency Shell and Tube type for superior heat exchange. - Condensate Extraction: Sigma pump ensuring effective condensate management. - Vacuum Pump: Invatech water ring vacuum pump for optimal system performance. - Steam Generator: Clayton E-1204-SH, known for its reliability and efficiency in steam production. - Deaerator and Blowdown Tanks: Depression models to safeguard system integrity. - Boiler Feed Pumps: Hammelmann, designed for consistent and reliable water supply to the boiler. - Boiler Booster Pumps: Flowserve, enhancing the system's pressure cap ...

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

Caterpillar 3512B - Overhauled - Locomotive Engine - 3ZW

Caterpillar 3412 - Used - 900 kVa - 2WJ

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Boiler ------------------------------------ - mounted on frames - - With integrated Eco - Manufacturer : LOOS, Gunzenhausen Type : UL-S 4000 Heating surface approx. : 80 m² Capacity : 3.170 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 19 bar Water content at NW approx. : 5.930 l Water content full approx. : 8.020 l Year of construction : 07 / 2010 CE mark : CE 0036 equipped with Elco oil burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings. Integrated Economizer Type Eco1: Ab. Pressure max. : 31 bar Test pressure : 56 bar Ab. Temperature max. : 238°C Heat output : 92 kW Total volume : 40 ltr

- Filter area : 6 m2 - Machine in good condition

Recon Part Number: 117753 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

PRINTER CUTTER S. No.: ZY30124 Equipment / Additional information: Technology: UV-Print&Cut InkJet LED Printing technology: Piezoelectric inkjet printer Media: Width 182 to 762 mm Thickness Maximum 1.0 mm with cover paper, when printing Maximum 0.4 mm with cover paper and 0.22 mm without cover paper, when cutting Outer roll diameter Maximum 180 mm Roll weight: Maximum 20 kg Inner diameter: 50.8 mm or 76.2 mm Print/cut width: Maximum 736 mm Ink cartridges Type: Roland ECO-UV / ECO-UV S Capacity: 220 cm³, 500 cm³ Colors: ECO-UV: Six colors (cyan, magenta, yellow, black, white and gloss varnish) / ECO-UV S: Five colors (cyan, magenta, yellow, black and white) Ink drying unit Dual UV LED lamp Print resolution (dots per inch / dpi): Maximum 1440 dpi Cutting speed: 10-600 mm/s (10-300 mm/s in media feed direction) Cutting force: 30-300 gf Blade  ...

RECON Part Number: 103178 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Manufacturer: Siemens S7, Type: 6ES7 354-1AH01-0AE0, Model: FM 354 Servo Motor,

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

RECON -Part Number: 1605919 - Diesel ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Manufacturer: Simovert P 6SE2105-3AA01  , Type: 6SE2105-3AA01  , Serial number: XA 9411 2 BE 163,

Manufacturer: Domino Digitaldrucker, Type: A 300, Year: ca.2006, FREETEXT1: inkl. Düsebhalter und Düsen, Year :ca.2006

Manufacturer: SEW Movitrac , Type: 31C014-503-4-00, Serial number: 0170982, Serial number: 8263744, Sale without warranty: 380-500 Volt, No right of return: 50-60 Hz, Installation height: 4,0 Ampere, Available: 2,8 KVA,

Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.