138,455 used machines on RESALE, but how to find them? Machine Search
CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg
Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead ...
Technical data of the pallet rack crossbeam: Shelving system: Modulblok The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: white Box profile: 100 x 40 mm Agraffe: 5 HK (hook) Clear width: 3,305 mm 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm
Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg
PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...
Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP: 80 x 42 mm Truss type: TRV1-330-08-l Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 1,400 kg, with the same weight Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED COMPLETE ABB SYNPOL D CMA 120 3DDE 300 400 AT OUR STOCK PART NO 5879 PRESENT CARDS LIST ON BELOW CMA 138 CMA 137 CMA 135 CMA 136 CMA 132 CMA 131 POWER SUPPLY IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED ABB SYNPOL D CMA 130 3DDE 300 410 AT OUR STOCK PART NO 7049 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
MAKE:MACGREGOR HAGGLUNDS ART NO:388 3127-801 SERIAL NO:1994480667 SUPPLIER:100658 DATE:9450
Table clamping area: 300 x 500 mm Travel x/y/z: 420/300/250 mm Spindle holder: BT 30 ISA small/gr. distance table/spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm/min Rapid speed: x u. y/z 25/20 m/min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Space requirement: 2650 x 1400 x 2450 mm Weight: approx. 2800 kg
Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 93cm Width: 140cm Height: 140cm Electric power: 1.5kW Delivery time: After the payment, from the stock
Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm
Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across ...
Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg
METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...
Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel
3000 x 1500mm 4000w With Bytrans Extended loading/Unloading
Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...
20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG
High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm
complete stainless steel suitable for thermo-oil heating (= 115 kW) Band length 3,000 mm Track width 400 mm Mesh width ± 10 mm Oil pump Level control Insertion tape Executable mechanical lifting device infinitely variable speed Dirt transport suitable for fire protection %, p/o (L x W x H) : ± 5,200 x 1,700 x 3,100 mm
3000 x 1500mm 4000w Bytrans Extended
HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...
TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)
CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock
TECHNICAL DATA: Drive: Battery Technical type: Forklift Carrying capacity kg: 1000 Barycenter mm: 500 Passenger seat: Yes Cabin: Open Number of wheels: 3 "Bolzoni" clamps - PB 08 ENA
Brand new, not yet unpacked Seifert Soultherm Peltier TG-3200 3200303 24VDC Useful cooling capacity L35L35200 W Permissible Operating Temperature-20°C - 70°C UL Temperature Range-20°C - 65°C Air volume flow (system / free-blowing) Ambient circuit: 120 / 260 m³/h Cabinet circuit: 120 / 260 m³/h Mounting typeSemi-installation Dimensions A x W x C (D+E) A = Height | B = Width | C = Depth 400 x 180 x 170 (79+91) mm Weight10 kg Cut-out dimensions370 x 155 mm Voltage / Frequency24 V DC Rated current L35L3511.3 A Starting current16.9 A Max. Rated Current12.9 A Rated power L35L35270 W Max. rated power311 W Back-up fuse18 A (T) Connection TypeConnection Terminals
Frequency inverter, 15KW, tested, max 2935 load hours, VLT FC-302P15KT5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 15 KW, VLT FC-302P15KT5E20H1XGXXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 29/25A - Output; 3x0-Vin, 0-590Hz, 32/27A - The frequency converters have been tested and only have between 1580 and max. 2935 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any def ...
Choose a suitable roaster and stay flexible! We can offer various roasters as follows: - Short-term rental of min. 1 year - long-term rental incl. maintenance contract - discounted takeover option after expiry of the contract. - Roaster color can be determined individually. - Roasters are delivered, installed and your staff trained. - Entsteiner, Afterburner and Coffee Loader can also be ordered on request. - and much more! Contact us and find your perfect equipment! We have many ways to meet your exact needs. Get the all-in package and you don't need to spend time in the maintenance etc. of used roasters. Focus on your business and roasting process!
Frequency inverter, 4 KW, tested, max. 606 load hours, VLT FC-302P4K0T5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 4 KW, VLT FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 9,0/7,4A, - Output; 3x0-Vin, 0-590Hz, 10/8,2A, - The frequency converters have been tested and only have between 105 and max. 606 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defe ...
Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude ...
Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;
Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm
Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
TO WHOM IT MAY CONCERN ; WE VE RECONDED CARTRIDGE OF CAT 3608 AT OUR STOCK RECONDATION COMPLETED AT ABB SERVICE PART NO 118 2454 - 118 2482 SERIAL NO C 25401 - 429704 MAX RPM 32000 t max 700C THERE IS AVALIABLE NOOZLE RING AND COVER RING WITH CARTRIDGE. READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...
maximum number of results exceeded
please refine your search
