power generators 3 used for sale

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Verpackungskodierer Manufacturer: Willett Type: 3170 For the product eco-labelling, coding of packaging and cardboard boxes. In good condition!

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation

FOR SALE STANDARD SIZE MEASURMENT CRANKSHAFT OF MAK 6M 332AK TO WHOM AT MAY CONCERN; THE CRANKSHAFT HAD BEEN PUT ON V BLOCK AND FOLLOWING TESTS HAD BEEN CARRIED OUT. -Main and crankpin journals measurements had been carried out. -MPI test had been carried out and no. crack had been observed. Crankshaft were found typical. -Run-out measurement had been carried out found in good order. -Hardness test had been carried out to all crankpins and main bearing journal. All values had been found in permissible limits. -Crankshaft had been polished. CRANK SHAFT READY TO TRANSPORT AT IZMIR - TURKEY. WITH FULL SEVICE REPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY ...

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

42 x SFS smart prop plus 20-300 new a 31,90EUR/St. â?¬1339,80 = 1 x Doka stack frame new 130,00 EUR 42 x SFS smart prop plus 20-350 of new 36,20EUR/St 1 x Doka stacking rack new 130,00EUR Number of ungebgrenzt / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and failover

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

FOR SALE 2 SETS MTU 12V 331 PROPOLSUION ENGINES 1180W AT TURKEY TO WHOM IT MAY CONCERN; WE VE 2 SETS MTU MTU 12V 331 PROPOLSUION ENGINES 1180W AT OUR STOCK ENGINES HAS ZF GEAR BOXES ENGINES READY TO TRANSPORT PLS FIND ENGINE DETAILS ON BELOW. RUNNING HRS 7330 / 7320 hrs 12V TYPE 331 POWER 1180KW ENGINE NO. 5531091 / 5531092 YOB 1999 RPM 2340RPM GEAR BOXES MAKER ZF MODEL BW 255 RATIO 2,46A TRANSMITION NO. 499 CAP 28 WE SOLD SOME MINOR PARTS PARTS FROM ENGINES. IF YOU INTEREST WE CAN DISMANTLE PARTS AND OFFER IT. ENGINES ARE TURNING WITH GOOD SUCTION ENGINES READY TO TRANSPORT... IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US... Capt. Ayhan Ugurluba Regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

3000 x 1500mm Laser: 3300w

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Steelyard with tare balancing device Manufacturer: Pfister scales GmbH Augsburg Type: N 300 Minimum load: 50 kg Maximum load: 2000 kg Mass Bridge: 1.5 m x 1.25 m In good condition!

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

Used Pester Pewopack overwrapper. Overwrapping machine for small and medium sized packs This machine has been in use chewing gum packaging and machine can be packaged in single or group packages

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

3000 x 1500mm 6000w

Compressor Bitzer 6JE-33Y-40P

Compressor Bitzer 4FE-35Y-40P

KUKA robot KR360-2 (repainted) Built in 2007 Range 2800mm Load 360kg Weight 2350kg KUKA control KRC2ed05 Weight 185kg Software V5. 4.11 KUKA KCP2ed05 KUKA set Several Creative Commons as long sleeve KR360L280 .

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

Material: mild steel Reel in stainless steel;

FOR SALE ... WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT TURKEY. TO WHOM IT MAY CONCERN WE VE WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT OUR STOCK . PLS FIND DETAILS ON BELOW TYPE BILGE MASTER 3000 SERIAL NO 9018-317 2007 YOB CERTICATE NO 330/241 WHEEL MARKET NO 0736 Separator TYPE WSD18-01-037 SER NO 9018-317 2007 YOB SYSTEM HAS COMPLETE OIL MONITOR PANEL / BILGE ALARM / CONDENCER ETC ETC BILGE MASTER 3000 READY TO TRANSPORT AT IZMIR TURKEY. IF YOU HAVE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US.. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Main diverter valve, brass MWM 348 / 484 Recon Part number: 6.483.0.762.002.6 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Recon Part number: 6.483.0.762.002.6 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Complete gas measuring station / gas detector device, including Dräger Polytron 2 IR Ex 334 etc. used Manufacturer: Dräger Type: Polytron 2 IR Ex 334 Condition: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 110 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron 2 IR Ex 334 - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFD2-SR2-Ex1.W - 2 Pepperl u Fuchs KFD2-STC4-EX2 transmitter power supplies The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we  ...

CAT 3412 650 HP / 584 KW @ 1800 RPM

RECON Part number: 300094 Engine number: 3269801 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

U-tronic maximum speed: 250 RPM

4 sides trimming line

E - engine of Exhaustor 3 x 380 volts.

- P-500-50 - P-320-50M

RECON pn. 1.20.7-32.1201-07 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us