power generators 3 used for sale

General SKU034F278 MakeLeiblein GmbH Hardheim TypeIR-Verdampfer IR-T 1200-3000 E No.104-0001 Year of construction2003 Mounted on frameElectric heating (27x 8 KW) Main Features MaterialStainless steel Motor0.37 KW Surface11 m2 Specified Features - Roll dryer Roll dryerInfrared-drying drum/evaporator (1x) Roll surface11 m2 Roll sizesdia. 1200x3000mm With knife dischargecheck With variable speed drivecheck Roll speed0,1-1,0 Rpm With jacketcheck Motor0,37 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck Floorspace5,6x1,5 M Total height2,6 M Weight3500 KGDiscountRoll dryersLeibleinDiscountDryers > Roll dryersBrand > Leiblein What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU132X770 MakeEberhard Hoesch & Söhne, Düren TypeGK6/3500/SO No.32 6333 Year of construction1988 LocationBarneveld Main Features MaterialHastelloy Volume3500 Ltr. Motor9.2 KW Specified Features - Stirring vessel MaterialStainless steel 2.4610 (Hastelloy C-4) Open stirring vessel(1x) Capacity3500 Ltr Vessel sizesdia. 1800x1300mm Dished bottomcheck Flat top sidecheck With covercheck Manhole800x450mm Outletdia. 175mm With jacketcheck With propellor stirrerHoesch Gegenstromrührer With gate type stirrercheck Motor9,2 KW + 7,5 KW, 380/660 Volt Speed mixing shaftvariable (12-49 prop./ 21-87 Rpm gate)DiscountStirring vesselsHoeschDiscountStirring vessels > Stirring vesselsBrand > Hoesch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Manufacturer: Brother Model: GT-361 Year of Manufacture: 2017 Technical Specifications - Voltage: 100V - 240V - Frequency: 50/60 Hz - Current: 0.4 A - Certifications: CE, MET (UL 60950-1, CSA C22.2 No.60950-1), RAM, S - Listing No.: E112529 - ACN: 001 393 835 Find more here - / Contact us at -

Lippert belt conveyor GF 3040-750-600 RA2501 Technical data: Conveying length (NL): 3040 mm Framework width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2005 condition: good (used) Conveying length in mm: 3040 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Ampere: 1,90 Conveyor speed m / s: freely adjustable scope of delivery: without supports  ...

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 325 mm bore stroke: 170 mm taper MK: 4 MK table-size: 570 x 480 mm feeds: 0,1 - 0,16 - 0,25 mm/U turning speeds: 60 - 1600 U/min total power requirement: 2,9 KW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,8 x 2,15 m Pillar drilling machine with: - Feed - Variable spindle speed - Coolant pump - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC BySpeed 3015 laser cutting machine was built in 2005 in Switzerland by Bystronic Laser AG. The machine on offer has been regularly maintained throughout its service life and is in very good technical condition. BYSTRONIC BySpeed 3015 is an excellent solution for precise cutting of a wide range of materials, i.e. stainless steel or aluminum. Thanks to the use of a number of well-proven solutions, the machine is perfect for both unit and series production. Workpieces with a maximum length of 3000 mm and a width of 1500 mm are machined by a high-quality laser beam with a power of 4.4 kW. The beam is generated by a reliable source with the highest energy efficiency. The cutting head with a powerful drive, in turn, provides very dynamic operation and a feed rate of up to 169 m/min. All this is complemented by a robust design that maintains the highest stability during even the mo ...

Large format printer Type: UCJV 300-160 Manufacturer: Mimaki Year: 2024 Working width: 160 cm Technology: UV LED – instant curing of the print Print + cut function in one machine Possibility of printing white color and layering High print quality and cutting accuracy Current counter status: print length: 1,362 m printed area: 1,676 m² operating time: 2,979 hours In good condition, fully functional Find more here - / Contact us at -

Large format printer Type: CJV 330-160 Manufacturer: Mimaki Print & Cut + XY slitter + media changer print area approx 15,000 m² 2 print heads printing + cutting in one device maximum media width 161 cm XY slitter – cutting along the X and Y axes (sheet-fed cut) media changer – up to 3 roles at the same time color configuration 2× CMYK (bulk system 2 l) high productivity up to 100 m²/h stable feeding of material included RasterLink SW 3 new solid colors In good condition, fully functional Find more here - / Contact us at -

Manufacturer: Edel Model: CP 3020 Year of Manufacture: 2009 Configuration: 5-axis with C-axis and A-axis Control System: Heidenhain 530 Find more here - / Contact us at -

This offer is for five Siemens Energy SGT-300-1S gas turbine units. The seller states that the units are brand new, have not yet been tested or commissioned, and are in good condition. For a full technical and commercial evaluation, please request manufacturer documentation, storage records, factory acceptance test reports, and commissioning documentation. Please contact us via WhatsApp at +38 050 323 99 22. Have a nice day, and God bless you.

plate length max.: 3000 mm sheet width - max.: 1500 mm z-axis: 170 mm material thickness: 25 mm burner heads: table width: mm table length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with ByLaser 4400 with turning axis ByVision cnc control with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Mater ...

This 3-axis TESA Visio 300 was manufactured in 2008. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 150 mm. The machine includes a precision vice and a glass stage plate, enhancing its measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA Visio 300 machine we have for sale. Contact us for further details.

Key data: 3000 mm, 1 mm

Schechtl guillotine shears 3mx1.5mm with hand depth stop in top condition, price net.

Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details.

Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system  

This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 € : 861.41 € : Doppelsäulenführung : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 1.5 kW : 3 kW : 0.12 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,-- The data for this ad was created with ModulMWS - the softwa ...

This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2018. It features a powerful 3000 W fiber laser and a travel range of 3070 x 1550 mm. The machine includes a nozzle changer with 16 stations and a water chiller for efficient cooling. If you are looking to get high-quality cutting capabilities, consider the AMADA ENSIS 3015 AJ machine we have for sale. Contact us for further details.

permissible. Total weight: 2300 kg, with loading bucket

Manufacturer: 3NINE Type: Oil mist separator Year of Manufacture: 2024 Find more here - / Contact us at -

max. load capacity 3,000 kg, dead weight 4,840 kg, max. lifting height 5,000 mm; NOTE: The forklift is located at a building yard in Wankelstraße, 41352 Korschenbroich, Germany!

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L

Labeler Manufacturer: HERMA Type H 300 SL Servo 8 Device No. 990 1109

Labeler Manufacturer: HERMA Type 362 C Masch.-Nr. 797 589

Length 4 m Width 1.75 m Height 3.40 m Color: Green Chain hoist El. Steel TYPE. P12 8 m / 2 m min 6 m chain

The Alfa Laval - Ibex MOG 3040 is a self-priming positive displacement rotary lobe pump with sanitary design which can handle low and high viscosity products like dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: ± 2,5 liter per revolution. Maximum nominal capacity: ± 90 m3/h. Inlet and outlet connection: 101,6 mm SMS male. Maximum product pressure: 5 bar. Maximum pump speed: 600 rpm. The pump is used in a dairy for product pumping. The current motor with this pump is 7,5 kW - 1.465 rp ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325x175x125 mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg

Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -

turning diameter over bed: 3750 mm turning diameter over slide rest: 3250 mm turning length: 15000 mm centre distance: 15000 mm faceplate: 3000 mm workpiece weight: 120 t steady: + 15t Rest: 2 main drive: 119 kW spindle bore: 105 mm spindle turning speed range: 0,33 - 75 U/min feed in x - axis: 300 mm/min feed in y - axis: 150 mm/min tailstock quill diameter: 500 mm total power requirement: ca 140 kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 2-Carriages - Face Plate 3000mm - 6-Steady Rests - 4-Way Bed Construction - Taper Attachment - Inch/Metric Threading - Tailstock With Live Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

Steiger work platform 30m Type OMME 3000 RBD Rubber tracks Year of construction 2006 Weight 4000 kg Private sale from the Hanover location Price from location 16,000,-- euros I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Used grinding mill from UPMACH Superfine Crusher type SFG 300, year of manufacture 2023. The machine is in working order, not used much. Fine mill with grinding head cooling system (chiller). It has a manual adjustment of the degree of fineness. Spare disc included.

Inv. Num. : 9119 Type: DRM Max 3001.30PrkGb Producer: MicroStep Created: 2024 Parameters: The machine is in good condition.

Russell Finex 30224 Vibratory separator 2015, stainless, five deck separator, with stainless meshs, 3Ph

Sleevemaschine Speed 10.000 bph magazin wiwth 2 rolls and non-stop roll changeover

Candles: 08 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring

with optical orientation Working direction: left-right

Working Temp Max 120C? Max Pressure 8 Bar Volume 17L

Manufacturer: Klieverik Type: GTC-3400 Year of Manufacture: 2005 CE Mark: Yes Working width: 3,400 mm Voltage: 400 V / 50 Hz Current: 27 A Find more here - / Contact us at -

A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

Lippert Belt Conveyor Riser with arch and straight GF 3130-550-400 RA2507 Technical data: Conveying length (NL): 3130 mm (ascending conveyor 2475 mm + arch 655 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3130 ( 2475 + 655 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Z ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 € : 1665.34 € : 220 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on  ...

: neu : 2025 : 060077 : prompt, Zwischenverkauf v : Türkei : 14200 € : 272.64 € : 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm : 15 - 120 m/min : 320 mm : 320 mm : 450x320 mm : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm : 0.37 kW : 2.2 kW : 0.12 kW : 2230 mm : 1150 mm : 2140 mm : 1030 kg Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roboter Fanuc Robot LR Mate 200iC Robot Controller R-30iA Mate Year of Make: 2011 Scope of delivery: Robot LR Mate 200iC Type A05B-1139-B204 I Pendant A05B-2518-C202#EGN Fanuc System R-30iA Mate Type A05B-2553-B061 Cables In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Belt width: 300 mm, Description: Adjustable height between belts, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1650 x 700 x 1600 mm