power generators 3 used for sale

Field roller, grassland roller, meadow roller, soil roller, roller -Meadow roller: Diameter: 1200 mm -Pipe wall thickness: 18 mm Features: Water-fillable, with scraper, warning signs -Total width: 3000 mm -Working width: 2650 mm -Bearings: Polyamide bushings -Weight when filled: approx. 5,000 kg -Unladen weight: 2,200 kg

Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: frequency controlled -Conveyor belt length: 3200 mm -Belt spacing: 400 mm -Drive: SEW-Eurodrive 0.075/0.37 kW 280-1400/14-72 rpm -Number: 2x conveyor belt available -Price per piece -Dimensions: 3260/1180/H990mm -Weight: 220 kg/pc.

Rotary union, rotary union, rotary distributor, rotor-borne rotary union -Condition: the rotary union is unused -Design: Brass housing and stainless steel rotor -External thread: 1 inch left -Internal thread: 1 inch -Passage: Ø 22 mm -Number: 2x rotary unions available -Price: piece -Dimensions: 83/83/H160 mm -Weight: 3 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 415 314 -Engine: Type GP 116-14/5.5 24 V 5.0 kW -Dimensions: 320/200/H220mm -Weight: 36 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 350 -Outer pulley diameter: 346 mm -Mounting: Ø38 x 195 mm -Dimensions: Ø346 x 195 mm -Weight: 13.5 kg

flat gear motor, gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Nord, adjustable gear motor -Type: 3380A-R150U-90L/40 -Speed range: 277 - 43 rpm -Engine: 2.2 kW / 1380 rpm -Hollow shaft: Ø 40 x 140 mm -Design: B14 -Protection class: IP54 -Dimensions: 600/540/H240 mm -Weight: 65 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Flat geared motor, geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Nord, geared motor -Transmission: Type SK 3282AZ-100L/40 i= 23.71 -Speed: 60 rpm -Engine: Type SK 100L/40 -Power: 3.0 kW / 1410 rpm -Protection rating: IP55 -Shaft: Ø 40 x 170 mm -Number: 2x motors available -Price: per piece -Dimensions: 500/250/H370 mm -Weight: 66 kg/unit

Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 3282A-100 L/4 i= 42.02 -Speed: 34 rpm -Engine: Type SK 100 L/4 -Power: 2.2 kW / 1440 rpm -Hollow shaft: Ø 40 x 175 mm -Protection class: IP55 -Dimensions: 470/290/H380 mm -Weight: 62 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: 4 kW -Speed: 2850 rpm -Flow rate: max. /h -Compression pressure: mbar -Number: 2x compressors available -Price per piece -Dimensions: 650/480/H555mm -Weight: 76 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, excavator cylinders -Manufacturer: O&K, hydraulic cylinder with control valve stroke 470 mm -Type designation: 1 713 351 1554 541 -Piston rod: Ø 70 mm -Hole diameter 120/60 mm, hole spacing 970/1440 mm -Dimensions: 1160/390/H230 mm -Weight: 99 kg

Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: 06420249/03M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck, faceplate, faceplate chuck, facing lathe chuck -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Passage: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Mounting: Short taper 6 / cone 103 - 106 mm short taper flange with Camlock fastening -Dimensions: Ø300 x 190 mm -Weight: 40 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle turntable steering -Platform: 3000/1500/H545 mm -Load capacity: 3.5 t -Tires: 75x305/400 -Drawbar: reversible, trailer coupling on both sides -Quantity: 1 piece available -Total dimensions: 4730/1500/H545 mm -Weight: 470 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor -Manufacturer: Siemens, power contactor -Type: GB 14048.5/50 Hz / GB 14048.5/50 Hz / 3RT2023 -Number: 4x switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/piece

Circuit breakers, motor protection circuit breakers, power disconnectors, low-voltage networks, circuit breakers for transformer, generator and plant protection, voltage releases -Manufacturer: Siemens, Sirius motor protection switch type 3RV2011-0GA10 -Voltage release: GB 14048.2 -Number: 4 switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.3 kg/piece

Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 3 pieces -Recording: MK5 -Length: 345 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 345/240/H40 mm -Weight: 9.9 kg

Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 2 pieces -Recording: MK4 -Length: 380 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 380/100/H30 mm -Weight: 3.2 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mount-on holder: Tool holder -Recording: MK5 -Length: 300 mm -Dimensions: see photos -Dimensions: 300/50/H45 mm -Weight: 2.3 kg

drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: Laboratory Müszeripari Müvek, chamber dryer oven type LP-321/2 -Usable space: WTH 500x520x660 mm -Heating power: 3.3 kW -Working temperature: 30 to 270°C -Door seal: silicone -Individual components: see photos -Installation dimensions: 2510/1600/H3760 -Transport dimensions: 990/740/H960 mm -Weight: 153 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Ziehl-Abegg, fan blower radial fan type MK085-4EK.10N -Engine power: 0.16 kW -Speed: 1330 rpm -Volume output: /min -Fan wheel: Ø 315 mm -Connection input: Ø 215 mm -Dimensions: Ø 315 x 180 mm -Weight: 6.7 kg

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: ebmpapst, axial fan axial fan -Type: S4D350-AF10-17 -Voltage: 230/400 V -Dimensions: Ø 400 x 110 mm -Weight: 3.5 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan Ø 340 mm -Type: unfortunately no type designation -Engine designation: SGV-35D-TF BB61B811H98 SEK 96.02.16 NSCE -Voltage: 220 V -Total dimensions: Ø 340 x 195 mm -Weight: 4.1 kg/pc.

Small parts magazine, storage bin shelf, storage bins, drawer magazine -Small parts magazine: Metal drawer magazine with 32 open storage boxes -Accessories: incl. storage boxes/drawers see photos -Number: 1x small parts magazine available -Price: per piece -Dimensions: 310/155/H550 mm -Weight: 4.3 kg/piece

cloth lapper, polishing wheel, grinding wheel -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustable gear: Lenze type 11 333 13 16 2 18-3.7 rpm -Gearbox: Lenze Type 12 603 16 1 1 -Engine HEW type: EEXF 80L/4 0.75 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R230.19 8250-12 -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 300 x 60 mm -Weight: 24.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C -Recording: SK50 -Dimensions: Ø 330 x 260 mm -Weight: 36 kg

Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: WMW SWZ, Clip-on tool holder -Recording: MK6 -Length: 345 mm -Dimensions: see photos -Dimensions: 620/100/63 mm -Weight: 10.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 with extension -Type: Ø 140 mm -Recording: SK50 -Dimensions: Ø 140 x 335 mm -Weight: 13.1 kg

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Greifzug, Corso beam clamp type LT-3B -Flange width: 80 - 320 mm -Load capacity: 3 t -Dimensions: 380/115/H375 mm -Weight: 11 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MK Maschinenbau Kitz, belt conveyor -Type: GUF-P 2000 AF 3600/150 -Speed: 6 m/min -Belt width: 135 mm -Conveyor length: 3600 mm -Drive: SEW-Eurodrive 0.12 kW, see photo nameplate -Transport dimensions: 3630/260/H270 mm -Weight: 36 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: stainless steel with rubber coating, diameter 300 mm -Transport width: 1007 mm -Shaft: Ø90 mm, dimensions see photos -Quantity: 1 piece available -Dimensions total: Ø 300 x 1855 mm -Weight: 273 kg

packaging system, packaging machine, hood shrink machine, hood shrinker, film packaging machine, sealing tool, tray sealing machine, tray sealer -Manufacturer: Reepack, Sealing Tool from tray sealing machine -Type: 342201270 -Shell size/cutting shape: dimensions see photos -Machine dimensions: 485/400/H220 mm -Weight: 36 kg

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device from vertical lathe Scherer VDZ 80 DS -Type: PNOZ X10.1 24VDC 6n/o 4n/c 6LED -Id.nr.: 774779 138241 -Number: 1x relay available -Dimensions: 90/90/H120 mm -Weight: 0.6 kg

Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 510 900 006 1517 222 377 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 3x pumps available -Price: per piece -Dimensions: 220/90/H120 mm -Weight: 5.3 kg/piece

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 510 900 039 1517 222 379 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: GSL, double hydraulic pump -Type: 1402 772653 3349121070 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 180/90/H120 mm -Weight: 4.2 kg/piece

vibratory conveyor, vibratory feeder, vibratory feeding device, feeding device, spiral conveyor, vibratory filler, vibratory spiral conveyor, vibratory doser, spiral conveyor -Handover: in current condition as viewed -Condition: without control, see photos -Screw conveyor: Vibration conveyor -Type: unfortunately without type designation -Connection: 230 volts -Transport dimensions: 460/300/H325 mm -Weight: 33.1 kg