power generators 3 used for sale

Gear shaving machine ZSA 320

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Temperature control unit Manufacturer: Robamat Model Robamat Thermocast 3201 Circles 1 Circuit Device Heating capacity at 400V 20 kW Flow temperature max. 250 °C Year of construction 2012 Remark Oil Appliance Price per piece 2 pieces in stock Price is net plus VAT Dismantling and removal by buyers All information without guarantee

Regloplast temperature control unit Bj 2011 Technical data in the pictures Price is net plus VAT Dismantling and loading by buyers All information without guarantee

Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool.  , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), desludge cyclone, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and waterbox (original Alfa Laval)., Additional features: Excluding:, - Service tools for maintenance., Capacity 10.000 - 15.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW

Unused main shaft for a Westfalia separator. Article number: 2231 3400 020., Type of Machine: Main Shaft, Drive line: 50 Hz, Condition: Never used

Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm

The GEA Westfalia CA 365-010 is a two-phase horizontal stainless steel decanter centrifuge (liquid + solids separation). It’s a continuous, high-G, conveyor (scroll) decanter used in food, oil, wastewater and chemical applications. Previously it is used as a fine decanter in a casein plant (foood industry). Diameter bowl: 365 mm. Diameter scroll 354/205 mm. Bowl speed: 4.000 rpm. Solids: 2.0 kg/dm3. Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A. Including hydraulic unit (Viscotherm AG, Pump-unit, C18.5-28.2Z/LP-W-50/10, year 2015, motor 18,5 kW, max pressure 170 Bar)., Type of Machine: Decanter, Diameter: 354 / 205 mm, Bowl speed: 4.000 rpm, Solids: 2.0 kg/dm3, Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A, Weight: 2.400 kg, Dimensions: 240 x 150 x 185 cm

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/27 rpm or 1600/34 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/25 rpm or 1600/30 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

3x CPU-P in stock 1247-3959 0-Hours / 6000-hours MWM DEUTZ AVAT 12473959 1247-3959 General Power Holland BV Kranenpool 10 6443VA Brunssum Netherlands +31681163153

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3140 mm daylight opening: 80 mm total power requirement: kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 3,8 x 1,5 x 1,6 m Pneumatic segment bending machine - Manual backgauge max. 830 mm - Bending angle preselection via limit switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU221Y085 MakeRieger Serial20200536-10 Type3850 l. Main Features MaterialStainless steel Volume3850 Ltr. Pressure1 Bar Specified Features - Vertical tank MaterialStainless steel 1.4404 (316L) Closed vertical tankcheck Capacity3500 l. (3850 l.) Vessel sizesø 1800 x 2000 mm Conical bottomcheck Manholeø 420 mm Top connectionsDN40 OutletDN50 Max. temperature50 °C Information Year of construction2021 Mounted on legscheck LocationBarneveld Floorspace1,80x1,80 m Total height3,00 mVertical tanksRiegerTanks > Vertical tanksBrand > Rieger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Sheeter Rondo Doge Compas 3000 Rondo Doge Model: SFA 612 Compass Touch computer control for all doughs for rolling out and touring with reel on the right for rolling up Connection 400V, 16A-CEE plug Used machine from the bakery

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

Baguette Long Roller SM 380 S Capacity: min. 50 - max.1200 g with felt ribbons for soft doughs 3 feed rollers for more dough tension Rolling width: up to max. 750 mm only DGUV V3 tested by us Connection: 400V, 16A-CEE plug Used machine

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1240 kg vice: 340 mm dimensions: 2020x2040x1740 mm Control: Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Singl ...

turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used milk centrifuge made by Alfa Laval, type: 3191. New: 1973

Used milk centrifuge made by Alfa Laval, type: 3191 with upper and lower fittings. New: 1975

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Puller Wipes 3920x560mm NEW6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded it is only for tradespeople.

Puller Cloths 3780x560mm NEW ( 4 pieces )Puller Dimensions : W: 3780mm D: 560mm7 HolesWe have different large puller cloths in stockDetails see picture 

Puller Cloths 3610x560 mm 4 Pieces NEW 7 Eyelets Puller Cloths 3610x560 mm 4 Pieces NEW! Puller Cloths NewPuller Dimensions: W. 3610 mm, D. 560 mmWith 7 holesDetails see picturePlease measure your wipes from one side to the other after purchase an exchange or return is excluded is only for tradespeople.   

Puller Cloths 3840x560 mm 4 pieces NEW! Puller Cloths NewPuller Dimensions: W. 3840 mm, D. 560 mmWith 7 holesDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded is only for tradespeople.    

Puller Cloths 3880x560mm NEW ( 4 pieces )Puller dimensions : W: 3880mm T: 560mm7 holesWe have various large puller cloths in stockDetails see picture 

Sourdough plant Isernhäger 300 ASB used Product descriptionManufacturer : Ritter / IsernhägerType : 300 ASBSower dough stirring kettle sourdough containerIsernhäger the baking culturecompletely in stainless steelKettle capacity 300 litersDetails see pictures

used sourdough plant IsernhägerProduct descriptionManufacturer : IsernhägerCa. 300 liters sourdough stirring kettle sourdough containercompletely made of stainless steelKettle capacity approx. 300 litersDetails see pictures

used sheeter Fritsch 30W/650Â Manufacturer: FritschModel: 30W/650Analog controlStainless steel on rollersHinges foldableThe Fritsch 30W/650 sheeter is a special machine used in bakeries and other companies in the food industry to roll out dough evenly and precisely. This machine is usually used for processing dough for croissants, puff pastries, pizza and other baked goods. The Fritsch 30W/650 is designed to roll the dough to the desired thickness and size to create an even texture

used sourdough plant Isernhäger B 300Â Product descriptionManufacturer : IsernhägerType : B 300Sourdough stirring kettle Sourdough containerIsernHäger the baking culturecompletely in stainless steelKettle capacity 300 liters Mobile on rollsDetails see pictures.

Puller Cloths 3310x570mm NEWProductor Dimensions : W: 3310mm D: 570mm6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.

Puller Cloths 3550x580mm NEWProductor Dimensions : W: 3550mm D: 580mm7 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Puller Wipes 3310x570mm NEWProductor Dimensions : W: 3310mm D: 570mm7 EyeletsWe have different size Puller Wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Puller Wipes 3430x570mm NEWProductor Dimensions : W: 3430mm D: 570mm7 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Puller Cloths 3920x570mm NEWProductor Dimensions : W: 3920mm D: 570mm6 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for traders.

Puller Cloths 3920x560mm NEWProductor Dimensions : W: 3920mm D: 560mm7 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.

Puller Wipes 3350x560mm NEWProductor Dimensions : W: 3350mm D: 560mm7 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded it is only for tradespeople.

Puller Cloths 3500x560mm NEWProductor Dimensions : W: 3500mm D: 560mm7 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.