power generators 3 used for sale

Veneer Saw Scheer FM 8 - 3100 Cutting length 3100 mm Stop system with scale Extraction fan Compressed air clamping Use Machine Condition Good Prices: free loading plus VAT

Dowel and slotted hole drilling machine GANNOMAT JUNIOR 320 LBM very good condition, as good as new, the machine comes from a very small carpenter's shop and was used there very little the machine is in its original condition, it has only been cleaned, the paint has not been touched up this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1993 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible t ...

Since the machine is used too little, it is sold. Technical data Max. sheet width: 420 mm max. Speed: 10 m/min Max. film width: 340 mm Lamination: single-sided Spot Sleeking: yes Shrink-wrapping (encapsulation): no Pressing: pneumatic, adjustable Material: from 135 g/m² Heat-up time: 10 min Temperature range: 80 - 140 °C, adjustable Core diameter foils: 76 mm: Power supply: 230 V / 50 Hz All information without guarantee Price is 5000 Euro net plus VAT

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

8 Pieces Diesel Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition

MONGUZZI CNC 2-Knife Veneer Cutting Machine AFD-52-3000 from location for sale.

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Offer 26035 Technical data - Three driven rollers, each roller hydraulically adjustable - For bending and conical rolling, side bracket can be swivelled out - Operation of swivelling control panel with digital actual value displays - Max. working width 3050 mm - Max. sheet thickness at 400 N/mm² without bending 20 mm - Bending at bending diameter min 5 x top rolling. 16 mm - Upper roller diameter 340 mm - Side roller diameter 250 mm - Lower roller diameter 300 mm - Drive 400 V / 9.5 kW - Working speed adjustable - Space requirement approx. W 6200 x H 1650 x D 1650 mm - Weight machine approx. 16000 kg - Total weight machine + support mast + support arm 19500 kg with: - Extended roller ends for attaching profile rollers - Conical bending device - Side support arm hydraulically movable - Upper support mast hydraulically movable

Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details.

ALFA LAVAL WSPX 303 TGP-71 Used tools (4pcs) year 1994

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

Key data: 46 mm, 3250 mm

Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

We offer new parts for sale for Yanmar Motor 3TNV88F (electronic regulator): All prices per piece in Euro plus freight+plus tax available from stock 1xECU unit NEW 129017-75040 net 750,- 1xCrankshaft NEW 129008-21000 net 750,- 1xOil pump NEW 129001-32002 net 250,- 1x Exhaust muffler with manifold net 300,- Many more new parts available on request at MIW GmbH Engine Repair Plant Nord-West-Ring 8 D-27404 Zeven-Germany Phone:0049(0) 4281-950583 Mail:infomiw-zeven.de

Code: 0319 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

PEMA HPS 3500 & TPS 3500 welding positioner was built in 2021 in Finland by Pemamek Oy Ltd. The system consists of two, extremely versatile machines – the HPS 3500 headstock and the TPS 3500 tailstock with a combined payload of 7 tonnes. This solution is dedicated to lifting and rotating long workpieces, making it ideal for the production of, among others, wind towers, trailer frames or tubes. Both machines can work together or independently. The stepless height adjustment ensures precise adjustment of the working parameters to the dimensions of the workpieces. Technical specifications of the PEMA HPS 3500 & TPS 3500 welding positioner - maximum payload: 7 t (headstock 3.5 t + tailstock 3.5 t) - rotation speed: 0.06-1.3 rpm - tilting axle height adjustment range: 700-1500 mm - work table plate diameter: 950 mm - T-slots on work table plate: M20 DIN508 (4 pcs.) - maximum torque ...

Key data: 1000 KW, 1800 1/min

Cummins K38‑M marine diesel engine, Engine No. 26433858, manufactured 16/03/2018, built to CPL 4291 and Rating No. 5376382. The engine is recently overhauled and has 9000 operating hours, offering a reliable 38‑liter V‑configuration with mechanical PT‑fuel system and robust continuous‑duty marine performance.

Key data: 1000 KW, 1800 1/min

New. Located at Cummies dealer in Esbjerg, thus no photos.

Flat conveyor belt on aluminium substructure Length of the strap 355 cm, width of the strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels

A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible.

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details.

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3460 mm table height: 800 mm 0: 220 bar cutting angle adjustment: 0,5x3 ° down holder: 18 back stop - adjustable: 750 mm front stop - adjustable: 1000 mm main drive: 7,5 kW oil volume: 300 l total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis HUBER OCT-3020 NA die-sinking EDM machine was manufactured in 2006. It features a travel of 300 mm in the X-axis, 200 mm in the Y-axis, and 350 mm in the Z-axis, accommodating workpieces up to 460 x 210 x 200 mm. If you are looking to get high-quality die-sinking capabilities, consider the HUBER OCT-3020 NA machine we have for sale. Contact us for further details.

cutting diameter: 325 mm saw band length: 4200 mm cutting width: 500 mm : 15 - 150 m/min. work height max.: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw Type: Concept 350 Manufacturer: Fimal Year: 2019 Main blade 350 mm Pre-cutting unit Massive formatting table Precise parallel ruler Strong and stable operation 400 V / 3 phases 20 pcs of discs included Machine in good condition, under power Find more here - / Contact us at -

sheet width: 3050 mm plate thickness: 12 mm rear stop: 1000 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 7 - 14 Hub/min oil volume: 350 l total power requirement: 22,5 kW dimensions of the machine ca.: 4200 x 2000 x 2250 mm weight: 8500 kg Equipment: - Haco SP 8 control unit - electro-hydraulic guillotine shears - guided by a guide rail - electric backgauge - electric cutting gap adjustment - electric cutting angle adjustment - 1x side stop - front finger guard - rear safety device ( light barrier ) - emergency stop device - 1x freely movable foot switch - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

turning diameter: max. 400 mm turning length: 600 mm control: 840 D Siemens greates pass round over bed: 500 mm Swing dia. over traverse guideway: 300 mm centre distance: 615 mm Main spindle:: turning speed range - main spindle: 20 - 6.000 min/-1 power capacity - main spindel: 16 kW max. Torque: 155 Nm max. usable bar diameter: 65 mm spindle nose: 140H5 C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 20 - 6.000 min/-1 power capacity - Sub spindle: 7,5 kW max. Torque: 48 Nm spindle diameter in front bearing: 75 mm spindle bore: 37 mm max. usable bar diameter: ( - ) mm spindle nose: 140H5 C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 5.000 min -1 power capacity - driven tools: 3,7 kW max. Torque: 24 Nm tool taper: VDI 30 Tool dimensions with square shank: 20 x 20 mm axis stroke:: x-ax ...

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two identical cooking kettles Steiner are available. Years of manufacture: 2009/2010, Volume: 300l, Heating type: steam, Max. steam pressure: 10bar, Kettle diameter: approx. 1000mm, Kettle depth: approx. 500mm, Machine dimensions X/Y/Z: approx. 1950mm/1200mm/1200mm, Weight: approx. 200kg. Documentation available. An on-site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500x300 mm : 300 mm : 300x300 mm : 200 mm : 200x200 mm weight of the machine ca.: 1250 kg dimensions of the machine ca.: 2250 x 2100 x 1280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 3100 mm Cutting height: 45 mm Motor output: 1,8 kW Dimensions (L/W/H): mm machine weight ab.: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Dimensions (L/W/H): 2300 x 700 x 1300 mm Air consumption: 3500 m³/h Motor output: 1,5 kW weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.