power generators 3 used for sale

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

sheet width: 3020 mm plate thickness: 5 mm distance between columns: 3020 mm Control: Simatec OP7 stroke: 450 mm back stop - adjustable: 1000 mm work height max.: 900 mm total power requirement: 22 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 4200 x 1600/2900 x 2000 mm Features: - Motorized backstop, 1000 mm - Motorized upper crossbar adjustment - Motorized lower crossbar adjustment - Side protection - Foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling an autoclave Korimat KA 380 Programmable control with the ability to record temperatures 1 basket for inserting products Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable.

Key data: 32 mm, 32 mm, 330 mm

CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...

Watercooled chiller TRANE RTHD 300 SE 1055 kW Cooling capacity: 1055 kW / 299.98 tons (12/7 - 30/35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Trane CHHC1D1F0N0 (screw) Type of refrigerant: R134a Dimensions: 3.3x1.65x2.3 m. Weight: 6300 kg. Working hours: 8319 h. Condition: Good

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 KW, 2860 1/min

Used Grundfos MGE 132SB2-38FF265-B electric motor with frequency converter Power 5.5 KW Voltage 400V, frequency 50Hz., current 12.0A, IP55 Speed 700 to 2860 rpm. With remote control / remote R100. Without pump. Sale only to tradespeople.

The model Pro-face 3580406-01 (FP3710-T41 series) is an industrial 15-inch TFT color monitor with touchscreen. It belongs to the FP3000 series and serves as a display and control unit for industrial PCs or programmable logic controllers (PLC).

This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details.

General SKU312X493 MakeGetecha TypeRS-353-A1.83 No.11955 Year of construction2000 Mounted on framecheck Main Features Motor31 KW Width620 mm Specified Features - Granulator MaterialStainless steel 1.4301 (304) Granulatorcheck Rotor width620 mm Rotor diameter350 mm Number of rotor knives3 Number of stator knives:2 With hoppercheck Hinged topcheck Hydraulic drive 0,75 kW (400 V) Motor30 kW, (400 V 1470 rpm) Rotor speed520 rpm Information LocationBarneveld With switchcheck Floorspace1,58 x 1,36 m Total height2,50 m Weight1300 kg CEcheck Extra Specifications3 sieves ø 12mm, 10 mm and 8 mmGranulatorsGetechaMills > GranulatorsBrand > Getecha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

General SKU347X802 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor37 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor37 kW,(400V, 1470 rpm) With variable speed drive115 rpm Speed mixing shaft127 rpm With lump breakercheck (4x) Motor4 kW, 400 V 2920 rpm Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) Information No.24262 Year of construction1999 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU347X806 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Top connectionsø 350 mm Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor30 kW, 380 V Speed mixing shaft115 rpm With lump breakercheck (4x) Motor4 kW Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) Information No.M24066 Year of construction1995 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible.

General SKU337X769 LocationBarneveld Main Features Motor18.5 KW Width375 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 375x100 mm Grinding room size750x75 mm With sieve cagecheck Inlet170x110 mm Feeding with rotating valvecheck Motor18,5kW, 400/690V, 2955rpm (EX) Speed+- 1350rpm Fine Impact Mills MaterialMild steel, Stainless steel 1.4552 Information MakeKek kemutec Year of constructionunknown Mounted on framecheck Floor space2,2x0,7 m Total height1,65 m Weight850 kg Extra SpecificationsThe housing is made of steel, the rotor is made of stainless steel. with: - dinnissen diverter valve. inlet: 170x110. outlet:170x110 and Dia 75mm - additional parts. Fine Impact MillsKek KemutecMills > Fine Impact MillsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

work piece width: 900 mm workpiece height max.: 40 mm feed speeds: mm/min workpiece length: 0 mm Control: total power requirement: 35 kW weight of the machine ca.: 3,7 kg Dimensions (LxWxH): 6,0 x 2,35 x 2,2 0 Sheet metal deburring machine - ESA touch panel - incl. turbo separator - incl. 3m infeed table - Spare belts - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU352X909 MakeRuberg Mischtechnik LocationBarneveld TypeVM 300 Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure jacket0.2 Bar Main Features MaterialStainless steel Volume390 Ltr. Motor33.5 KW Specified Features - Ribbon blender Ribbon blendercheck Capacity425 l. Useful capacity300 l. Trough sizesDia. 900x700 mm InletDia. 265 m Manhole500x550 mm OutletDia. 200 mm Interrupted ribboncheck With jacketcheck Max. temperature60°C Glands air purgedcheck Motor15 kW (400 V, 1450 rpm) Speed mixing shaft35 rpm MaterialStainless steel 1.4301 (304) Information No.1685 Year of construction2001 Mounted inclined on framecheck Floor space1,40 x 0,90 m Total height2,30 m Weight720 kg Extra SpecificationsWith lump breaker, 15/18,5 kW, 500 volt, 1475/2950 rpmRibbon blendersAmixonMixers > Ribbon blendersBrand > Amixon What you can expect from ...

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

General SKU319X542 MakeNetzsch LocationBarneveld TypeCS320/440-3A Main Features Motor15 KW Inlet diameter350 mm Width440 mm Specified Features - Granulator Granulatorcheck Rotor width400 mm Rotor diameter320 mm Number of rotor knives3/2 Number of stator knives:3/2 With hoppercheck Inlet450 x 350 mm Motor15 kW, 400/690 volt, 1465 rpm Rotor speed520 rpm Capacity150 kg/h With fancheck Motor2,2 kW, 3000 rpm With cyclonecheck Information No.7374 Year of construction2000 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace0,915x1,4 m Total height1,25 m Weight1200 kgGranulatorsNetzschMills > GranulatorsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

General SKU220X102 MakeMettler Toledo Garvens TypeC 3351 LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity600 gramm Capacity100 pcs/min Information No.11004477255 Year of construction2019 Mounted on legscheck With switchgearcheck Floorspace1,40x0,90 m Total height1,20 m Extra SpecificationsMin 100 g, e=0,2 g, d=0,2 g, belt conveyor, dimensions 1300x200 mm, max conveyor speed 47 m/min, : touchscreen control, 100-240 volt, temperature range 0°C/+40°C, : accuracy class XIII(1) with pneumatic reject unit, product cap./dimension 200x150x50 mm, product weight 400 g. Miscellaneous transportMettler ToledoConveying systems > Miscellaneous transportBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

The 2003 Mazak VTC 300 is a Vertical Traveling Column (VTC) machining center designed for handling long, heavy, or oversized workpieces that might be awkward on a traditional moving-table machine. Find more here - / Contact us at -

General SKU212X068 MakeUrschel LocationBarneveld CEcheck Type3600 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Cutter MaterialStainless steel 1.4301 (304), Stainless steel 1.4542 (17-4 PH) Cuttercheck Knife diameter152,4 mm Number of knife blades4 With hoppercheck Inlet300x150 mm Outlet420x150 mm Motor7,5 kW, 220-240/380-415 volt, 2900 rpm With variable speed drivecheckfrequency converter Speed2900rpm Information No.2131 Year of construction1997 Mounted on wheelscheck With switchcheck Floorspace1,00x0,60 m Total height1,15 m Weight181 kg Extra SpecificationsWith 8 extra cutting heads and extra knifeCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect  ...

1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

General SKU437W1417 MakeMedimex LocationBarneveld TypeMED 263 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume2 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2 l. Vessel sizesDia. 120x200 mm Dished bottomcheck Top connectionscheck With jacketcheck Max. temperature300°C With propellor stirrercheck without propellor Motor0,12 kW, 380-420 volt, 1390 rpm, (Ex) Speed mixing shaft1390rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.170760 Year of construction1996 Floorspace0,60x0,70 m Total height1,45 m ATEX compatiblecheck Extra SpecificationsVessel pneumatic movable :Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready  ...

Tetra Pak TBA19 330 ml Prisma Filling Line General Information: - Manufacturer: Tetra Pak - Model: TBA 19 – Version 010V - Year of Make: 2003 - Capacity: 6,000 packs/hour - Filling Volume: 330 ml - Format: Prisma - Condition: Very good used condition Line Overview: Complete Tetra Pak filling and secondary packaging line for 330 ml Prisma carton packs, designed for reliable and efficient production in dairy and beverage applications. The line combines a proven Tetra Pak TBA19 filling machine with a brand-new cap applicator and a cardboard packer, ensuring modern functionality and high operational reliability. Ideal for producers looking for a cost-efficient, ready-to-install solution with upgraded components. Main Components: - 1. Filling Machine - Make: Tetra Pak - Model: TBA 19 – Version 010V - Capacity: 6,000 p/h - Volume: 330 ml - Format: Prisma ...

CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -

Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -

Trumpf TrumaBend V230 8 assen: Y1 / Y2 / X / R / Z1 / Z2 / V / W bovenste en onderste Willa hydraulische gereedschappen met Trumpf ACB-optie; hoekmeetsysteem 3 beweegbare plaatsteunen aan de voorzijde veel gereedschappen inbegrepen Capacity: 230 ton x 3100 mm Backgauge: CNC Control: Delem Passage between uprights: 2690 mm Max stroke: 365 mm Max distance between table -- ram: 535 mm Depth of throat: 410 mm Table width: 200 mm Locking speed: 200 mm/sec Working speed: 1 > 10 mm/sec Returning speed: 135 mm/sec Electric motor (power): 30 kW Length: 3660 mm Depth: 2120 mm Height: 3095 mm Weight: 17,7 ton

BILLION HERCULES H2000 Series - 320 T Clamping force: 320 T - 3200 KN Injection unit: H 2000 Screw diameter: 75 mm Distance between columns: 610 x 610 mm Tray dimensions: 920 x 920 mm Min/max thickness of the mould: 330 - 680 mm Opening stroke: 660 mm Injected volume: 1259 cm3 Material pressure: 1587 bar Dimensions: 7.1x 2.1 x 2.6 m Weight: 14,000 kg

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.

General SKU025P753 MakeChemap AG No.9-2964 Year of construction1985 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity300 Ltr. Vessel sizesdia. 700x800mm, Flat top side Dished bottomcheck Outletdia. 30mm With jacketcheck (15 Ltr.) Max. temperature130°.C., Vibro stirrer Information Floorspacedia. 0,9 m Total height2,2 m Extra SpecificationsWithout controls Technical specs Extra informationFlat top sideStainless Steel ReactorsChemapReactors > Stainless Steel ReactorsBrand > Chemap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...

USED TETRA PAK TBA 19 250ML BASE 30v FILLING LINE FOR SALE Item #: Usm-234 Category Tetra Pak TBA 19 One used Tetra Pak tba 19 250ml base filling line for sale. 1-TBA 19 250ml Base filling line, year of manufacturing 2007, Version 30v, working hours 11900 2-Straw applicator tsa 21 3-tetra pal shrink tts 51 4-20m Tetra Pak conveyors and easy ride 5-Paper trolly Condition: Good

REFURBISHED TETRA PAK TBA 19 200ML SLIM 30v FILLING LINE FOR SALE Item #: Usm-237 Category Tetra Pak TBA 19 Refurbished TBA 19 200ml Slim 30v Filling Line for sale 1-TBA 19 200ml Slim Filling Machine, Year of manufacturing 2007, Version 30v, Working hours 30000 2-Straw applicator TSA 21 3-Multi Shrink wrapper 65 4-20meter conveyors and Paper trolly Condition: refurbished and test run approved.

Box and Bag Printing Machine – BM300 Perfect for printing on paper bags and cardboard. Introducing the BM 300, an easy-to-use and highly versatile digital solution for Direct-to- Packaging printing. With a small investment, it opens up opportunities in the ever-growing market of customizing boxes, shipping envelopes, paper bags, and jute in small and medium runs. This latest addition is a natural evolution based on sales successes and customer feedback, resulting in a more effective and smooth workflow management system. The BM 300 incredible versatility comes from its combination of an ultra-fast HP Technology print engine with water-based, solvent-free, and odorless pigmented inks. It can print on both treated and untreated paper and cardboard substrates, as well as directly on packaging up to 15 cm thick. With the BM 300 Software, you can accurately adjust the printhead  ...

General SKU315T1252 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel Capacity± 300 Ltr. Vessel sizesdia. 750x690 mm With covercheck Top connectionsdia. 34 mm Outletdia. 46 mm With jacketcheck With paddle stirrercheck Motorcheck 1,5 kW 380-500 Volt Speed mixing shaft10-280 rpm Stirring vessels With paddle stirrercheck Information MakeTerlet Type(unknown: missing typeplate) Mounted on legscheck With switch(as is) Floorspace1,4x1,4 m Total height1,5 m Weight570 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

Height 1940 mm Width 1100 mm Length 2200 mm Electrical Supply: 400V 50Hz 3N Total power 22 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 180 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant

sheet width: 3000 mm plate thickness: 4 mm work height max.: 900 mm : 450 mm total power requirement: 5,5 kW weight of the machine ca.: 4800 kg dimensions of the machine ca.: 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU212T478 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408 Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Information MakeAPV TypeW-25/200-380 Mach.No.922145040915360000 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Metal band saw MEBA 320 DG semi-automatic hydraulic - Semi-automatic - Hydraulic operation - Infinitely adjustable band saw speed - Mitre cuts possible - Hydraulic clamping of the mitre adjustment - Hydraulically adjustable saw pressure - Fully hydraulic material clamping - Coolant device - Automatic shut-off - Emergency stop - Connection: 400 V - Cutting range: Round material: up to Ø 320 mm

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

General SKU212T485 MakeAPV TypeW-25/200-380 LocationBarneveld Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 380-690 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 DC 8/32 towers, each with 8 stations, suction feeder, DBM 120 stapling and folding unit, DBM 120T trimmer, stacker System 5000

Motor: 2402 cm³ Motor power: 92 kW Top: Diesel Motor Model: D0FA Length 6750 mm Width 2090 mm Height 2900 mm

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendzimir galvanised Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg|pcs. max. load per shelf 150 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Inv. Num. : 8749 Type: M2-3120B Producer: FLOW Created: 2011 Parameters: Table dimensions: 2000x3100 mm Spindle power: 6.6 kW

Grafisk Maskinfabrik - Slitter Rewinder LS-350 Working width: 350 mm Connection voltage: 400V, working width: 350 mm, Supply voltage: 400V