power generator used for sale

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

Caterpillar Gas Generator G3516A From 2001 Year of Manufacture these 2 x Caterpillar units are robust and high-performance power generation unit, designed for industrial and commercial applications. This model of generator is part of Caterpillar's well-regarded G3500 series and is engineered to provide reliable, efficient power in demanding environments. Key Specifications: Model: G3516A Year of Manufacture: 2001 Output: 1 MW Rated Speed: 1500 RPM Voltage Output: 400V Frequency: 50 Hz Fuel Type: Gas Engine Type: 6-cylinder, turbocharged, and aftercooled Cooling System: Liquid-cooled Performance and Efficiency: The G3516A is built to provide stable power output with minimal emissions. Its turbocharged and aftercooled engine ensures efficient operation even under high-load conditions. The generator operates at a steady 1500 RPM, ensuring smooth and cons ...

Key data: 3 KW, 3 kVA, 11000 V

2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C  ...

Without pallet truck Auction-ID: A1-46045-247

Without pallet truck Auction-ID: A1-46045-246

40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12

30kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-14

Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...

Steam generator PS400-60, electric heated stainless steel steam generator year of manufacture 2022, Factory inspection with the manufacturer 2026, 400 V / 60 kW / 50 Hz, 2-stage switchable (30 + 30 kW), max. operating pressure: 5 bar, adjustable operating pressure: 0 - 4 bar, max. steam amount: max. 84 kg/h (calculated value under optimal conditions), on a mobile frame, 1. Mechanical construction, The pot body is made of stainless steel 1.4571 and electrically welded. In, Kettle bodies are heating elements screwed in. The kettle body is located in a, Stainless steel housing and is clad with thermal insulation. In the stainless steel housing, the control cabinet is also located here. fittings (e.g.: steam outlet, water inlet,, etc.) lie outside the housing, 2. Functionality, Feedwater is pushed into the steam boiler by a water inlet valve. Is, when the intended water level is reached, the ...

Manufacturer: Atlas Copco Model: QAS200 Year of Manufacture: 2011 Type of Machine : Emergency Power Generator Operating hours : 242 h Find more here - / Contact us at -

Key data: 710 KW

Nei pebbles Ltd electrical machine cage rotor induction motor output 710 KW machine designed for heavy-duty applications, often utilized for driving compressors, fans, or pumps

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

Key data: 2400 KW, 400 V

Diesel Generators 4 x 2400 kW / 50Hz Containerized CAT C175-16 Gensets Never operated, new like condition, containerized diesel generators made in year 2016 and 2017. Generating sets have modern, low fuel consumption optimized CAT C175-16 diesel engines running in 1500 rpm and having standby electric capacity of 2400kW and 2000kW in continues operation. Units include all necessary auxiliaries for full operation. Technical characteristics Manufacturer: Caterpillar USA Diesel Engines: CAT C175-16 Manufacturing year: 2016 and 2017 Operating hours: Zero (New condition) Number of units: 4 pcs Output – Stand-by: 2400kW / 400V / 50 Hz Output – Continuous duty: 2000kW / 400V / 50Hz Fuel: Diesel oil Control system: EMCP 4 Control Panels Container dimensions: 16 x 4.1 x 4.1 m (L x W x H) Container weight: 56’000 kg

Key data: 57900 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: gas heated, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Capacity: 96 Ltr, Set pressure gas burner: 20 mbar, Length: 1,6 m, Width: 0,95 m, Height: 2,2 m, Base construction: mounted on platform, Features: feed water treatment and dosage module

; Power [PS]: 354; Gross weight [kg]: 5787; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x200kW, 2x30kW, - AC copper: 3P/4W, 200kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x200kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 200k

; Power [PS]: 408; Gross weight [kg]: 9424; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x300kW, 3x30kW, - AC copper: 3P/4W, 300kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x300kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 300

Available: 6 gas generator sets Wärtsilä type 16V175SG2, mounted on skids, without control panels. Year: 1996 Service hours: 26,000 h Speed: 1500 rpm – 50 Hz Alternators: Stamford Please feel free to contact us for further information (price, photos, availability).

Key data: 1600 KW, 2000 kVA, 11000 V

Diesel Generators Cummins 2 x 2000kVA, Skid Mounted, Never Installed This power generation package consists of two (2) never installed Cummins diesel generator sets model C2250D5, each rated 2000 kVA / 1600 kW Prime Power operating at 1500 RPM, 50 Hz, 11 kV. The generator sets are designed for reliable continuous operation in accordance with ISO 8528 standards and are suitable for industrial, utility, and critical infrastructure applications. Each generating unit includes a Cummins QSK60G4 engine, high-voltage alternator, advanced Power Command control system, on generating set mounted cooling radiator, and associated accessories to ensure dependable power production and protection. Technical Parameters Manufacturer Cummins (UK) Generator model C2250D5 Manufacturing year 2022 Engine model Cummins QSK60G4 Engine speed 1500 rpm Alternator type PMG P80HVR Quantity 2 Un ...

Key data: 8000 KW

Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics  ...

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Key data: 2880 KW

Natural Gas Generator Niigata 2 x 2880 kW / 60 Hz with Auxiliaries Two well maintained natural gas generators manufactured by Niigata in 2005, electrical capacity 2 x 2880 kW / 60 Hz. The plant was operated till 2020 and maintained according to Niigata maintenance instruction, last scheduled 30000 hour maintenance for both engines was carried out in April 2019. Plant was professionally dismantled on 2022 and total 31000 operating hours with mechanical and electrical indoor auxiliaries. Plant control system, mechanical indoor auxiliaries, HV breakers and MCC cabinets belongs to the scope of supply Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets 2 pcs Running hours approx. 31100 – still in operation Voltage 3450V / 60 Hz Frequency 60Hz Alternator ...

Key data: 5760 KW, 3450 V

Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets  ...

Key data: 53500 KW, 11000 V

Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Key data: 1068 KW, 1335 kVA, 400 V

For sale is a Newage generator with the serial number A12H327489. This generator was coupled with a Jenbacher 320 engine with the design number O988. The generator delivers an output of 1335 kVA at an output voltage of 400 V. It was manufactured in 2012. The price for this powerful and hardly used generator is 7,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is an AvK generator with the serial number 8427962 A101. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 4000 kVA at an output voltage of 11000 V. It was manufactured in 2006. The price for this powerful and hardly used generator is 35,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is an AvK generator with the serial number 8428602 A101. This generator was coupled with a Jenbacher 620 engine with the design number E192. The generator delivers an output of 4000 kVA at an output voltage of 11000 V. It was manufactured in 2007. The price for this powerful and rarely used generator is 40,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

Key data: 800 KW, 400 V

CATERPILLAR GENERATOR SET Model TCG3016 V16 – 800 kW Year 2021 – 13,000 Operating Hours – Containerized Unit We offer a CATERPILLAR TCG3016 V16 generator set with an electrical output of 800 kW. The unit is containerized and ready for industrial, energy production, or cogeneration applications. Main specifications: Electrical power output: 800 kW Voltage: 400 V Frequency: 50 Hz Maximum current: 1600 A Short-circuit current: 65 kA Protection rating: IP54 Year of manufacture: 2021 Operating hours: 13,000 h Configuration: CATERPILLAR TCG3016 V16 gas engine Industrial 400 V alternator Control and power cabinet Fully integrated containerized unit for easy transport and installation Condition: Unit in working condition Immediately available Inspection possible upon request

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4

; Power [PS]: 98; Gross weight [kg]: 3000; Engine: Battery System: LIFePO4; Accessories: Battery, Control Panel, Power connection Input:, - AC socket: 3P/5W, 1x60kW, 1x30kW, - AC copper: 3P/4W, 60kW, - DC socket: 60kW, Power connection Output:, - AC socket: 3P/5W, 1x60kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 60kW

; Power [PS]: 544; Gross weight [kg]: 12000; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x400kW, 4x20kW, - AC copper: 3P/4W, 400kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x400kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 400

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

- ABE & vehicle registration document available; - Engine running; - Viewing recommended; - Chassis needs to be repaired; - Video on request; Auction-ID: A1-46334-14

Key data: 160 KW, 400 V

Vissmann Vitobloc 200, Enine MAN E2878 E312, 160KW electric approx. 210KW thermal, approx. 50,000h all maintenance and overhauls carried out. 2 pieces available.

Containerised 525kW MWM TCG2016V12 CHP Landfill gas unit. Model: TCG2016V12 Capacity: 525 kW Fuel: Landfill gas Year: 2009 Hours: 22,500 Voltage: 400V Frequency: 50 Hz Scope of supply : Containerised Biogas unit including, Engine, Alternator, Base Frame, Control Panel, Gas Line, Radiator, Louvres, Exhaust. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Diesel generator, 3 Phase Diesel generator 2x220 volt max 6500 watt, 165 kg, new in box Auction-ID: A1-40418-238

Type: High-Speed Micromotor System / Ultrasonic Generator Set Manufacturer: NSK Nakanishi Model: Z500 Components: - NSK Z500 control unit (brushless micromotor) - Handpiece / motor spindle - Foot control connection - Additional unit: Laptron 50 ultrasonic generator (visible) - Step-down transformer (external) Speed Range: up to 50,000 rpm (display shows x1000 min⁻¹) Display: Digital speed display Control: Rotary speed control + push buttons (FWD/REV, motor) Application: Precision grinding, polishing, deburring, mold finishing, fine machining Features: - Brushless high-performance motor - Forward / reverse operation - Foot pedal compatible - Compact benchtop unit Condition: Used Auction-ID: A7-45993-81

Diesel generator, 3 Phase Diesel generator 2x220 volt max 6500 watt, 165 kg, new in box Auction-ID: A1-40418-118

Unaudited Good condition Auction-ID: A7-46327-195

Very clean and brand-new 110 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 110 kVA Prime power: 100 kVA Frequency: 50 Hz Voltage: 400/230V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Large integrated fuel tank New condition Year of manufacture: 2025 Applications: Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supply ...

Very clean and brand-new 170 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 170 kVA Prime power: 155 kVA Frequency: 50 Hz Voltage: 400/231V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Integrated fuel tank – 380L New condition Year of manufacture: 2026 Applications Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supp ...

Complete maintenance New battery Works perfectly Auction-ID: A3-43528-36982

equipped with Cummins diesel engine \"939 hr operating hours\", electric motor, control panel, Grundfos multistage high pressure pump, KSB centrifugal pump, diesel tank volume 400 Ltrlot has been dismantled before the collection day, Auction-ID: A1-45845-5

equipped with electric motor, control panel, Grundfos multi-stage high-pressure pump, KSB centrifugal pump, lot has been dismantled for the collection day, Auction-ID: A1-45845-6

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...