138,463 used machines on RESALE, but how to find them? Machine Search
Key data: 70 KW, 63 kVA, 400 V
HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315
The VISCOTHERM Hydraulic Power Unit B/C 11–22 Z/HP is a powerful, robust pump unit for the reliable supply of the ROTODIFF hydraulic motor in decanter centrifuges. With an 11 kW electric motor, a gear pump (22 l/min at 270 bar) and integrated proportional control, it enables infinitely variable adjustment of the screw speed during operation. The 85-litre tank, an efficient oil/water cooler and extensive monitoring and protection components ensure safe and long-lasting operation – even under demanding industrial conditions.
PRESS DESIGN drive system: eccentric / crank table cushion: yes PRESS FORCES total force (nominal): 63 to nominal work capacity: 630 kNm PRESS TABLE table surface (left-right): 900 mm table surface (front-back): 560 mm opening in bed (diameter): 250 mm SLIDE table surface (left-right): 450 mm table surface (front-back): 310 mm clamping surface diameter: 50 mm stroke: 100 mm stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 17.5 mm stroke max.: 100 mm DIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 340 mm distance table - slide max.: 440 mm ELECTRICAL SPECIFICATIONS total power consumption: 5.5 kW mains voltage: 380 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/righ ...
On offer is a combined heat and power plant from the manufacturer Energiewerkstatt Hannover, model ASV 20/43. The complete engine was completely replaced about 1.5 years ago for approx. € 20,000.00 and is therefore to be considered as new. Technical data: Manufacturer: Energiewerkstatt Hannover Model: ASV 20/45 Gas Type: Natural Gas The plant is currently located at our customer's site near Hanover and is being sold due to restructuring. A viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. It is also the buyer's responsibility to carry out any professional dismantling and loading of the assets. Since these are used assets, we sell them without guarante ...
Dimensions: 4100x1200x2500 1200x800x800 Auction-ID: A1-50229-36
In used functional condition for use with mower deck. Auction-ID: A3-46125-17461
Auction-ID: A1-50275-173
Rotary lobe blowers / Roots blowers without drive or attachments from Aerzen.
Rotary lobe blowers / Roots blowers without drive or attachments from Aerzen.
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/24DC/2.5 Ord.No.: 2866268 -Input: AC 100-240V -Output: 24 V -Dimensions: 125/35/H130 mm -Weight: 0.5 kg
2x Fug Low Voltage Power Supply NLN 15000M - 1500 NLN Series (Low Voltage Linear Regulated Power Supplies) Power class 15000W Rated Voltage 1500V The voltage is internally limited to 1500V and cannot be regulated. Technical data -Power connection 400V ±10% 3phase 47-63Hz N-connection and PE (protective earth) always required! Overvoltage category II according to IEC664. Power plug according to IEC309 -EMC EN 50 081 - 2 EN 50 082 - 2 Signal and control cables ≤ 3m length -Security the devices comply with EN 61010 (cf. VDE 0411) -Environmental conditions Operating rooms : for indoor use only (see section 2.1.) Temperature : 0 °C to 40 °C Humidity : maximum relative humidity 80% up to 31 ºC, linearly decreasing up to 50% relative humidity at 40 ºC Pressure : Altitude up to 2000 m above sea level Degree of contamination : 2 according to IEC664 -Degree of protection - IP20 ...
Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available
used hydraulic power unit with accumulator, for the operation of a screen changer
Power supply model Trio PS/1AC/24DC/5, used but in very good condition.
Consisting of: 3x grinder 1x circular saw machine 1x dremel Auction-ID: A1-44050-258
Petrol engine ecodriver 180cc Auction-ID: A1-44050-49
Delivers 230 and 400 Volt voltage, power 6500 Watt. Auction-ID: A1-49862-14
EA Electro-Automatic EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Item Condition: Used 6.3A 2400W PD 7,00 Financing by our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory power supplies - new and used - in our shop! International shipping costs on request!
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 55 to PRESS TABLE table surface (left-right): 750 mm table surface (front-back): 450 mm SLIDE table surface (left-right): 400 mm table surface (front-back): 300 mm spigot hole diameter: 45 mm stroke: 50 mm stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 6 mm stroke max.: 50 mm stroke rate (min.): 50 /min stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm space requirements -front/back-: 1500 mm total height: 2500 mm total weight approx.: 3850 kg ATTACHMENTS (PRESSES) strip feeder: optional fe ...
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 40 to PRESS TABLE table surface (left-right): 650 mm table surface (front-back): 380 mm thickness of bolster plate: 60 mm opening in bed (diameter): 120 mm SLIDE table surface (left-right): 350 mm table surface (front-back): 250 mm spigot hole diameter: 40 mm stroke: 78 mm stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS) slide adjustment: 60 mm stroke min.: 8 mm stroke max.: 78 mm main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS total power consumption: 3.05 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1300 mm space requirements -front/back-: 1100 mm total height: 2150 mm total weig ...
Generator unopened Auction-ID: A1-41951-150
maximum number of results exceeded
please refine your search
60 € 
