power check ott used for sale

Key data: 4000 kN

Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Handlebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authorized s ...

open-circuit voltage: 280 - 320 VDC current intensivity: 30 - 80 A output voltage: 140 VDC cutting medium: Air / Nitrogen total power requirement: ca. 11,2 kW weight of the machine ca.: 40 kg dimensions of the machine ca.: 0,90 x 0,35 x 0,50 m Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 incl.HYPERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : ERSA Model: Powerflow PRO Type: Wave Soldering Machine Condition: Used Key Specifications - Transport frame width: 400 mm - PCB clearance height: 100 mm - Pre-heating length: 1500 to 2000 mm (configurable) - Heating configuration: 2x medium wave + 1x short wave - Flux system: ERSA motorised spray flux system, 10-litre standard container - Solder pot: lead-free, enamelled titanium, approx. 525 kg lead-free solder capacity - Solder angle: 7 degrees - Compatibility: lead-free and leaded solder processes - Control system: PC control, Windows 10 - Software: Ersasoft 5 with MES interface capability - Certification: CE compliant Find more here - / Contact us at -

WEINIG moulder, type Powermat 1500, Manufacture year 2016, Machine specifications:, - Planing width 20 - 310 mm, - Planing height 10 - 200 mm, - Cardan feeding, motor 9.5 kW, - Feed speed 5 – 40 m/min, Spindle layout:, 1. Horizontal bottom spindle, 15 kW, 2. Vertical spindle right, 15 kW, 3. Vertical spindle left 15 kW, 4. Horizontal top spindle, 22 kW, 5. Horizontal bottom spindle, 15 kW, 6. Horizontal top spindle, 30 kW, 7. Horizontal bottom spindle, 15 kW, 8. Universal spindle 7.5 kW, - Powerlock for spindle 1 - 8, - CNC positioning for spindle 1 - 8, - Spindle 1 - 7 with 8000 rpm, - Memory Plus touchscreen controller, - Surface table 1200 mm, - Feeded table rollers, - Waxalite pump, - Complete with tooling and accessories

The original build year of this machine was 1998. It was overhauled at the end of 2013 by Walter and converted from HMC500 to Fanuc control. In 2014 it was returned to operation. Maintenance was carried out and the associated parts were replaced up until 2024. Protocols/logs are available. The spindle bearings were replaced with high-precision ball bearings 14 days ago. The spindle is now running with 0-1 µm accuracy and is very quiet. Suitable for regrinding and remanufacturing of wood and metal working tools of all kinds. Accessories: FANUC i15 Control Pallet loader cylindrical, Toolstudio Software Standard & Advanced Version 2.1 Toolstudio Software Drills Toolstudio Software Boost Toolstudio Calibration Probe Software package 1 (cylindrical mills) Software package 2 (tapered-spiral end mills) Software package 3 (drill bit and step drill) Software package 16 (warming-up program) Measu ...

Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

Fiber laser cutting machine Type: Laser Genius Fiber Manufacturer: Prima Power Year: 2017 Machine hours: 22151 Working area: 4000 x 2000 mm Resonator power: 6000 W Cutting table load capacity: 1850 kg Positioning accuracy of X and Y axes: 0.03 mm Installed power: 56.3 kW Minimum air inlet pressure: 7 bar Compressed air consumption (laser + suction): 30 Nm3/hour Maximum sheet thicknesses: structural steel: 25/20 mm stainless steel: 20/12 mm aluminum alloy: 20/6 mm brass: 10/10 mm copper: 10/8 mm Machine in good condition, under power Find more here - / Contact us at -

Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg

Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

·, - Weight: approx. 35.0 t, · Setup time: about 0.5 h, · Max. task piece size: about 800 mm, · Inlet opening: 1,200 × 700 mm, Throughput: dependent on the material, · Year of construction: 2012, · Operating hours: approx. 8,000 h

Mobile Wheel Screening Plant Powerscreen Chieftain 8 x 4 = Manufacturer Powerscreen mobile screening system on wheels, mobile, semi-trailer Screen dimensions 2,438 x 1,219 mm Screen Box: Double Decker Eccentric Screen Box Throughput: approx. 80 - 100 t/h

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 670 mm   width: 480 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 4500 mm   space requirements -front/back-: 3053 mm   total height: 2500 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz POWERJET T4-V TWIN continuous cleaning system – powerful and reliableA high-quality POWERJET T4-V TWIN industrial continuous cleaning system from renowned manufacturer LPW Reinigungssysteme GmbH is available for sale.The system is ideal for the efficient cleaning, rinsing, drying and preservation of workpieces in series and batch production.Two working chambers for high throughput and flexible processesMulti-stage cleaning, rinsing and drying process including vacuum and hot air dryingSuitable for batch weights up to 200 kgFive freely programmable cleaning programmesMovement options: station ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

weight max.: 1200 kg table turning speeds: 80 - 1600 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 20 - 800 mm range L-W-H: 520 x 470 x 390 mm Antrieb range L-W-H: dito mm Mitläufer voltage: 230 V / 50 Hz weight: 56.0 kg current new price approx. 3,000 euros special price on request Product description: - For processing cylindrical workpieces - Flat frame - Swivel castors with polyurethane coating - Clearly arranged operating elements - Infinitely variable speed - The control electronics are protected by a robust and . enclosed housing - With foot switch for start/stop - Drive with DC electric motors and gearbox The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1. The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Tec ...

Key data: 15 KW, 400 V

EC Power Gas CHP XRGi 15G-TO Electricity and heat generators, unknown year of manufacture, unknown operating hours, with controller, without buffer memory and q-Network Controller. 15 KWel, 400 V / 50 Hz. Manufacturer: EC Power Model: XRGi 15G-TO Type: Gas CHP Serial Number: 40181104 Power [KWel]: 15 Power [KWth]: 32 Power [KWgas]: 55 Year of manufacture: unknown Operating hours: unknown Weight [kg]: 650 Dimensions LxWxH [m]: 1.40 x 0.80 x 1.30

Manufacturer: LPW Model: PowerJet 670 T4-V Twin Year of Manufacture: 2010 Type of Machine : Cleaning System Cleaning Medium: Aqueous cleaner (water-soluble, pH 7-9) Technical Specifications • Standard basket size: 670 x 480 x 300 mm • Alternative: 2 stacks (3 baskets each, 480/430 x 320 x 110 mm) on angle frame (max height 300 mm) • Maximum batch weight: 200 kg (average approx. 150 kg) • Cycle time: approx. 5 to 10 minutes per batch • Total filling volume: approx. 2,600 litres • Supply voltage: 3 x 400 V / N / PE - 50 Hz • Control voltage: 24 V DC • Total connected load: 70 kW • Dryer heating power: 24 kW • Other bath heating power: 60 kW • Air exhaust: 240 to 480 m3/h • Fresh water pressure: approx. 3 to 4 bar • Compressed air connection: approx. 6 bar (min. 4.5 bar) • Machine dimensions (without loading): 4,500 x 2,400 x 2,500 mm • Loa ...

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Excellent condition - Fully operational - Loading / Transport possible! 5 AXIS CNC Toll & Cutter Grinder Walter Helitronic Power HMC-400 Specifications: Capacity of Workpiece Dia.: 1mm – 99mm Max. Peripheral Grinding: 254mm Max. End Face Grinding: 185mm Max. X Axis Travel: 350mm Max. Y Axis Travel: 200mm Max. Z Axis Travel: 470mm A Axis: Infinite C Axis Rotary: +/- 200° ( 0.001° ) Grinding Spindle Motor: 16 hp Grinding Wheel Type: Diamond or CBN Grinding Wheel Dia. Max.: 150 mm Grinding Wheel Speed: 500 to 10,500 RPM Programs include: Drill, End Mill and Form Tool Double side grinding spindle Walter Helitronic Power HMC-400 Equipped With: 10,500 RPM Precision Spindle Windows based Walter cnc Control CBN Diamond Wheel installed Probing system Coolant and Filtration System (small tanque) Full Enclosure WorkLight

General SKU418U1308 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information No.170099 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,5x0,9 m Total height2 m Weight400 kg ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliab ...

General SKU418U1309 MakeGenser LocationBarneveld CEcheck TypePowervap-20-EX Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information No.180100 Year of construction02-2017 Mounted on framecheck Mounted on wheelscheck With switchgearcheck ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably. - Computerized reflux and standby option - The rotating flask floats freely in the heating bath  ...

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

Ottoman TEKA Grünline 2 pcs.

Auction-ID: A1-46617-41

Machine number: 5076 Operating voltage: 380 V Connection: 12 kW Panel dimensions: 2250 x 1200 mm with 4 cylinders Reference: Common - Lot 70 Auction-ID: A7-46763-171

Kepco JQE 100-5 M Power Supply Power Supply Laboratory Power Supply Power Supply Auction-ID: A7-46327-95

Condition: Very Good Model : G440 Brand: JCB Scania Power : 320 KW /400 KVA Engine: Scania 6 cylinder DC 12 59A turbo diesel. Year of Make: 2014 Operating hours: approx. 8623h RPM : 1500 U/Min. Frequency : 50 Hz Auction-ID: A1-46826-8

Bei Fragen: 01718367957

SF WeighStation checkweigher. Double rejects for both under- & overweight weighins. Conveyor width: 600mm Year of production: 2014 Serial number: SF 589314.738 Dimensions: 2.850mm x 1.200mm & 1.800mm (LxW&H)

Liebel Wäge- und Sortiertechnik USS – 4 checkweigher from 2002. Weighing range: - Max weight: 750 gram - Min weight: 50 gram Weight precision: 1 gram Speed: 120 packs per minute Conveyor width: 200mm Year of production: 2002 Serial number: 02003 Condition: good Dimensions: 1.300mm x 750mm & 1.650mm (LxW&H)

Weighing range: min.50g to max. 5kg Accuracy: 0.5g Suitable for a bag length of 140 - 350mm Speed (clock): 15 pcs/min

Thermo Ramsey Accustar checkweigher. Maximum product weight: 4 kg Weight precision: 1 gram Speed: 90 metres per minute Conveyor width: 225mm Year of production: 2003 Serial number: 5512 Condition: good Dimensions: 1.650mm x 1.000mm & 1.850mm (LxW&H)

Loma 6000 checkweigher. Push reject for over- and underweight weighins Maximum weight: 6 kg per product Weight precision: 0,6 gram Speed: 250 products per minute Finish: 304 stainless steel Conveyor width: 140mm Year of production: 1999 Serial number: ACW-40540-010733 Condition: good Dimensions: 1.800mm x 900mm & 1.100mm (LxW&H)

Herbert Gemini weigh price labeller from 2003. Weighing range: - Max weight: 4 kg - Min weight: 0,1 kg Weight precision: 0,002 kg Labelheight: - Applicator no 1: 150mm - Applicator no 2: 400mm Packs per minute range: - Minimum speed: 1 per minute - Maximum speed: 100 per minute Conveyor width: 225mm Year of production: 2003 Serial number: 20251005 Condition: good Dimensions: - Checkweigher: 1.600mm x 750mm & 1.750mm (LxW&H) - Labeller & printer: 1.800mm x 1.000mm & 2.100mm (LxW&H)

The AMTEC VERTIwrap is a sorting module weight tester. Width 220 mm, weight range 5-999 g e = 1, 5 g. The machine is available and can be viewed like in Meersburg, Baden-Württemberg.

Newtec Model: 5000C checkweigher roller conveyor serial: 1491 weighbed 350mm x 330mm, with roller outfeed conveyor, weight ranges from