We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,591 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Check valve, double throttle check valve, hydraulic valve HOERBIGER VDR2ZP04 Maximum pressure: 320 bar Opening pressure adjustable ! used, tested ! Dimensions: 170 x 35 x 30 mm
used
Control level, spirit level Maßfabrik NETZSCHKAU 300 mm Accuracy: 0.02 mm / m im Schutzkasten used, tested ! Dimensions ( directional scale) : 300 x 40 x 42 mm Dimensions ( directional scale) : 325 x 80 x 60 mm
used
Check valve, pneumatic valve, 10 pieces PAGUS 1/4 ( inches ) nominal diameter: 8 mm Connections: G1/4 ( inches ) female / external thread installation length: 48 mm width across flats: 22 mm Other quantities on request New ! Dimensions( single valve ): 48 x 25 x 22 mm
used
Check valve, pneumatic valve, 2 pieces HOERBIGER PNEUMATIC RV-6 nominal diameter: 6 mm installation length: 40 mm width across flats: 17 mm Other quantities on request ! New ! Dimensions ( single valve ): 40 x 19 x 17 mm
used
Throttle check valve, pneumatic valve, 2 pieces ORSTA ARH NW10 TGL 20718 nominal diameter: 10 mm nominal pressure: 10 kp/cm² ( approx. 10 bar ) installation length: 66 mm Connections: M16 x 1.5 ( internal thread ) New ! Dimensions ( single valve ): 66 x 30 x 67 mm Dimensions ( packaging ): 130 x 70 x 70 mm
used
Throttle check valve, pneumatic valve, 2 pieces ORSTA ARH NW16 TGL 20718 nominal diameter: 16 mm nominal pressure: 10 kp/cm² ( approx. 10 bar ) installation length: 102 mm Connections: M22 x 1.5 ( female thread ) New ! Dimensions ( single valve ): 102 x 42 x 110 mm Dimensions ( packaging ): 115 x 90 x 70 mm
used
Throttle Check Valve Set, Speed Regulator, Speed Controler TELEMECANIQUE PWRA1833 080982 1 - 10 bar Control line connection: G 3/8 Threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! unused ! Dimensions(single throttle check valve): 70 x 62 x 30 mm Dimensions: 150 x 70 x 35 mm
used
Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER PWR-A1483 80956 1 - 10 bar Control line connection: 8 mm Plug-in connection Threaded connection: G 3/8 Throttle check valve set consists of 2 valves ! unused !; Dimensions(single throttle check valve): 65 x 65 x 30 mm Dimensions: 120 x 70 x 30 mm
used
Throttle Check Valve Set, Speed Regulator, Speed Controler PARKER, TELEPNEUMATIC PWRA1458 080950 1 - 10 bar Control line connection: 4 mm Plug-in connection Threaded connection: G 1/8 Throttle check valve set consists of 3 valves ! unused ! Dimensions(single throttle check valve): 45 x 45 x 20 mm Dimensions: 60 x 60 x 80 mm
used
Check valve set, check valve, line check valve CROUZET 81 529 901 P: 2 - 8 bar Sclauch outer diameter: Ø 4 mm check valve set consists of 4 valves ! unused ! Dimensions(single check valve): 40 x 12 x 12 mm Dimensions: 40 x 50 x 20 mm
used
Check valve set REXROTH MECHMAN 254 010 405 1 Thread: M5 hose diameter: Ø 4 mm check valve set consists of - 10 valves ! unused ! Dimensions: 80 x 70 x 20 mm
used
Check valve set REXROTH MECHMAN 254 010 605 1 Thread: M5 Hose diameter: Ø 6 mm check valve set consists of - 10 valves ! unused ! Dimensions: 140 x 100 x 50 mm
used
Check valve set REXROTH MECHMAN 254 010 818 1 Thread: G1/8 Hose diameter: Ø 6 mm check valve set consists of - 10 valves ! unused ! Dimensions: 140 x 100 x 50 mm
used
Controlled check valve, 2 pieces FESTO HGL-1/4-B 530031 Operating pressure: 0.5 - 10 bar Control pressure: 2.0 - 10 bar Pneumatic connection 1: G1/4 Pneumatic connection 2: G1/4 Control air connection: G1/8 New dimensions (solenoid valve): 59 x 34 x 14 mm Dimensions ( packaging ): 60 x 60 x 20 mm
used
Check valve, check valve set HOERBIGER PNEUMATIC RV9-15 G1/2 0.02 - 12 bar check valve set consists of 8 check valves !; New ! Dimensions(single valve): Ø 35 x 56 mm Dimensions: 140 x 70 x 60 mm
used
Check valve, check valve set HOERBIGER PNEUMATIC RV9-10 G3/8 0.02 - 12 bar check valve set consists of 6 check valves !; New ! Dimensions(single valve): Ø 34 x 54 mm Dimensions: 105 x 70 x 55 mm
used
Check valve, check valve set REXROTH 5340981300 G1/2 0.5 - 15 bar check valve set consists of 5 check valves ! New ! Dimensions(single valve): 66 x 30 x 27 mm Dimensions: 150 x 70 x 30 mm
used
Check valve PAGUS JT16/II PN16 DN32 Installation dimensions: 180 mm Flange: Ø 140 mm Material: cast iron New ! Dimensions: 180 x 140 x 150 mm
used
Check valve ARI PN 16 DN 25 Installation dimension: 160 mm Flange diameter: Ø : 65 / 115 mm bolt circle diameter: Ø 85 mm hole diameter: Ø 14 mm valve body material: cast stainless steel ( 1.4408 ) used, geprüft Dimensions: 160 x 155 x 115 mm
used
Check valve ARI PN 16 DN 40 Installation dimensions: 200 mm Flange diameter: Ø 90 / 150 mm bolt circle diameter: Ø 110 mm hole diameter: Ø 17,5 mm material valve body: cast stainless steel ( 1.4408 ) used, tested Dimensions: 200 x 190 x 150 mm
used
PVC-U check valve, check valve, with adhesive nozzle +GF+ ( GEORG FISCHER ) Type: 303 EPDM 161303012 DN 65 PN 10 Adhesive nozzle: Ø 75 mm, length: 106 mm New, with documents ! Dimensions ( valve ): 285 x 225 x 20 mm Dimensions ( packaging ): 350 x 230 x 190 mm
used
Check valve SWAGELOK Type: B-8CP2-1 604970001 nominal opening pressure: 0.07 bar ( 1 psig ) Connections: 1/2 inch NPT male thread Material: Brass ( body ), Buna-n ( gasket ) New ! Dimensions: 60 x 26 x 22 mm
used
Ishida Dacs Metal detector checkweigher Serial: 559915 2009, stainless combi metal detector checkweigher, weight range 100g - 1200g, with Ceia THS metal detector, aperture 270mm x 110mm, weigh platform 370mm x 220mm, HMI touch screen controls, push arm reject into reject bins, with manual, 1Ph
used
Throttle check valve, pneumatic valve MECMAN 344/110 MOD. A Nominal diameter: 6 mm Nominal pressure: 6 bar Nominal flow: 280 l/min Connections ( female : G1/8 ( inch ) New ! Dimensions ( single valve ): 70 x 30 x 17 mm
used
Throttle check valve, pneumatic valve MECMAN 344/120 MOD. A Nominal diameter: 8 mm Nominal pressure: 6 bar Nominal flow: 1040 l/min Connections ( female thread ): G1/4 ( inch ) New ! Dimensions (single valve): 90 x 38 x 20 mm
used
Throttle Check Valve, Pneumatic Valve MECMAN 344/125 MOD. A Nominal diameter: 12 mm Nominal pressure: 6 bar Nominal flow: 1960 l/min Connections ( female thread ): G3/8 ( inch ) New ! Dimensions (single valve): 115 x 55 x 27 mm
used
Throttle Check Valve, Pneumatic Valve MECMAN 344/130 MOD. A Nominal diameter: 16 mm Nominal pressure: 6 bar Nominal flow: 5250 l/min Connections ( female thread ): G1/2 ( inch ) New ! dimensions (single valve): 115 x 55 x 27 mm
used
Check valve, hydraulic valve ORSTA 10 - 11.00 / 1 TGL 26254 / 20 New ! Dimensions: 120 x 45 x 45 mm
used
• Weighing range max. 30,000 g • Weighing surface approx. 400 x 660 mm • Resolution D= 2 g • Accuracy e= +/- 10 g • Belt speed 42 m/min (adjustable) • Load cell SB 60.2 • Stainless steel version • Without printer • Drive 230V/50Hz
used
• Weighing range 400 g - 60 kg • Tolerance e=20 g • Weighing terminal type 3030 • Pneumatic bad ejection tilting device • Belt height with base frame (only for weighing belt) 3.05 m • Infeed roller belt, driven, W 580 mm, centre distance 990 mm • Weighing belt W 580 mm, centre distance 1,300 mm • With 4 load cells type SEB4A-HS each max. 75 kg • Outfeed belt, driven, with pneumatic reject device, W 600 mm, centre distance 1,880 mm • With accessories for connection of infeed/outfeed conveyor, sensors, pneumatics • Network interface RJ 45 • Connection 100-240V/50-60Hz • Suitable for e.g. sacks, heavy cartons • Unused
used
Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS with 2 tracks (2 objects are weighed simultaneously) • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz Scale has worked together with aerosol filling/sealing unit (our item no. 13-0102).
used
• Weighing area max. 300 g • Belt speed 10-40 rpm • Axis-centre distances feeding belt/weighing belt/outfeed belt 600/200/250 mm • Belt width 100 mm • Resolution d= 0,1 g • Accuracy e= +/- 0,1 g • Temperature area 10-40°C • Weighing cell BF8 D-G-P • Belt direction left to right • Blower discharge • Interface RS 232 • Height adjustable • New belts plastic white • Connection 230V/50Hz
used
• 11 load cells, 1 of which compensation • Weight range up to 5 g • e=d =1 mg • Output max. 50 cycles/min • Load cell MTC 10/30 • Bad ejection with single track rejection and ejection counter control • Touch panel 10,4 • IPC control • Electr. connection 380V/50Hz
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm • Bad ejection through pneumatic pusher • Without printer • Non calibratable • Drive 230V/50/60Hz
used
• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230V/50Hz
used
Garvens TopLine VS2 inline checkweigher with reject and printer, weight range up to 300 g, calibration value e=0,1 g, accuracy +/-0,1 g, belt width approx. 120 mm, length of infeed & outfeed belt approx. 250 mm, length of weigh cell approx. 200 mm, running from left to right, capacity up to 400 weighings per minute, electrics 230V/50/60Hz, machine floor space approx. 900 x 900 mm (WxD), machine height approx. 1400 mm, machine net weight approx. 85 kg
used
Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg
used
Check valve, check valve -Type: RK 86A -Connection: DN32 -Nominal pressure: PN40 -Total length: 28 mm -Material: stainless steel -Number: 5x valves available -Price: per piece -Weight: 0.8 kg/piece
used
Check valve, check valve -Type: RK 86A -Connection: DN50 -Nominal pressure: PN40 -Total length: 35 mm -Material: stainless steel -Weight: 1.7 kg
used
Check valve, check valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 1.2 kg
used
Check valve, check valve -Type: RK 86A DN 32 -Connection: DN32 -Nominal pressure: PN40 -Material: stainless steel -Weight: 0.8 kg
used
Check valve, check valve -Type: RK 86 DN 25 -Connection: DN25 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.5 kg/piece
used
Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.4 kg/piece
used
Check valve, check valve -Type: RK 86A DN 20 -Connection: DN20 -Nominal pressure: PN40 -Material: stainless steel -Number: 6x valves available -Price: per piece -Weight: 0.4 kg/piece
used
Check valve, check valve -Type: RK 86 DN 20 -Connection: DN20 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Weight: 0.4 kg
used
Check valve, check valve -Type: RK 86 -Connection: DN80 -Nominal pressure: PN40 -Total length: 50 mm -Material: stainless steel -Weight: 3.5 kg
used
Check valve, ball check valve, check valve -Type: 0106138 - Connection: DN50 -Total length: 125mm -Material: stainless steel -Check valve: consists of a plastic ball without a spring -Weight: 1.5kg
used
check valve, non-return valve -Type: RK 66A - Connection: DN80 -Nominal pressure: PN40 -Total length: 50mm -Material: stainless steel -Number: 1 pieces available -Weight: 2.5kg
used
Check valve, check valve -Type: GS011 -Connection: DN100 -Nominal pressure: PN16 -Total length: 18 mm -Passage: 70 mm -Material valve cover: stainless steel -Number: 2x valves available -Price per piece -Weight: 2.5 kg
used
Check valve, check valve -Type: RK 66A -Connection: DN80 -Nominal pressure: PN40 -Total length: 51 mm -Material: stainless steel -Weight: 3.1 kg