powder plant used for sale

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Stock number: SF178, Powder sieve, stainless steel,, housing Ø 250 x L 650 mm., For continuous operation of, powder / granulate., Material: Stainless steel AISI 304

Stock number: SF033, Powder sieve, stainless steel,, Jesma, type 200/650., For continuous sieving of, powder/granulate., Sieve Ø 200 x L 650 mm., Material: Stainless steel AISI 304

Stock number: SF031, Powder sieve, stainless steel,, Jesma, type 200/650., For continuous sieving of, powder/granulate., Sieve Ø 200 x L 650 mm., Material: Stainless steel AISI 304

Stock number: SF032, Powder sieve, stainless steel,, Jesma, type 200/650., For continuous sieving of, powder/granulate., Sieve Ø 200 x L 650 mm., Material: Stainless steel AISI 304

Stock number: SF030, Powder sieve, stainless steel,, Jesma, type 200/650., For continuous sieving of, powder/granulate., Sieve Ø 200 x L 650 mm., Material: Stainless steel AISI 304

VIBRATING SCREN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good  ...

Used automatic vertical sachet machine from Alpha Pack Europe type PM-100. New 2016. A filling machine for gels, creams, and ointments. Technical data: - 6 mm seal, - Capacity 30 - 50 pcs/min (depending on the package, - Sealer length: 30mm-120mm, - Seal width: 30mm-85mm, - Automatic single-line packaging machine for 3 or 4-seal sachets, - Notch on the sealer for easy opening, - PLC controlled machine, - Color touch screen with which all settings are made, - Photocell for printed film, - Structure and parts in contact with the product made of stainless steel, - Safety covers made of transparent plastic, - Hot-stamp” date printer for printing batch number and expiration date on sachets, - Piston dispenser, - Heated product tank with infinite temperature control. Weight 250 kg.

Screw feeder for powdered products

Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price) Measuring instrument, unused, with full warranty, fully assembled Pick-up requested near Freiburg (D), shipping 150 Eur Scope of delivery Injector up to 300gr/min Control Unit Pro Analog Powder spray gun C2 (without remote control buttons) All cables and hoses Trolley and Vibrating Table Description Universal, processes almost all powder coatings and part structures Powder Coating Equipment 510 gram hand pistpole, flat spray nozzle Most important components from Switzerland Efficient and precise User-friendly rotary switch Car. Regulation of the charging voltage (mA) Fair prices on wear parts

"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...

Linear balance for powders and granules. Weighing takes place directly in the container to be infected (buckets, cans, cups. conversion to bags or sacks possible). Weighing range up to at least 10 KG German make. Very good condition. Partly outdated. Tested and functional. With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.

A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.

Powder machine Fabikat PEKU with 1000 mm passage width for powdering top and bottom for Plates, profiles, hoses, etc.

Fully automatic filling line for buckets 2-5 kg. Incl. palletizing robot and wrapper.

B&C bagging machine from 2007 in excellent working order. Machine capable of bagging; soil / fertilizer / mulch / pellets / powders / wood chips / granules / fertilizer / salt. Possibility of making bags from 5L to 80L. Maximum bagging capacity of 12 bags / minute in 40L. Bag transport conveyors provided + bag flattener.

Semi-automatic gravimetric dosing of powders ranging from free-flowing to very poorly flowing (e.g. clumping, moist, or bridging) as well as fibers, flakes, and other bulk materials. Fill weight: max. 50 kg depending on the dosing screw. Filler comes with a lot of accessories such as vacuum conveyor PIAB, various dosing screws, etc. PLC: Siemens SIMATIC S7-200.

Used vertical packaging machine made by Velteko model HSV 101S1. New 2002. The machine is equipped with auger dispenser and a date dispenser + receiving conveyor + PRISMA 08D3 checkweigher. TECHNICAL PARAMETERS: The HSV 101S machine is designed for packing loose and small goods into bags, which the machine forms from a roll of packing material. The machine is designed for normal working environment protected from the influence of atmospheric agents with temperature regulation (-5 to +40°C) -AB5, AC1, AD1, AE1, BA4, BOI, BE1, CA1, CD1 - according to HD CENELEC 384.3 S 1 The parts of the machine coming into contact with foodstuffs are made of stainless steel (17 240 Cr-Ni) suitable for contact with foodstuffs. The capacity of the machine depends on the grade of packaging material, the goods being packed, and the capacity of the dispenser. - Performance of the machine (layered  ...

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating -Infrared dryer: used for powder coating slats/blinds production -Manufacturer: Himmel, type HA 5-2-9/500 -Geared motor: WEG 0.37 kW -Dimensions: 880/1050/H2200 mm -Weight: 308 kg

Manual Powder Coating System – Control Unit General data: Equipment type: Control unit (gun controller) for electrostatic powder spraying Weight: approx. 100 kg Dimensions (L x W x H): approx. 600 x 800 x 1100 mm Technical details: Power supply: 85 – 250 VAC Frequency: 47 – 440 Hz Air control: integrated connections for airflow regulation Description: Manual powder coating control unit designed for electrostatic powder spraying applications. The system allows precise control of coating parameters and airflow, ensuring efficient and uniform coating results in industrial environments. Auction-ID: A7-45351-5

We sell an older but fully functional and complete TRIBO powder coating system consisting of - Through-baking furnace INDAPP approx. 8m x 4m, oil firing. - District conveyor with infinitely variable drive - 2 automatic cabins with 2 spray guns each - 1 hand cabin (self-built) - Hand sprayer TRIBO96C from INTEC - Suitable cyclones for powder recovery - Vibrators for powder screening - Extraction, powder filter The entire system is more than 40 years old, but fully functional and still in use. The TRIBO system works without high voltage, the charge is generated by rubbing the powder in the plastic tube of the spray gun. We have been using the system for about 40 years to paint housing parts made of sheet steel, which works very well and also economically fast. Please note: Sale from location. The system must be completely dismantled by the buyer. To do this, look at t ...

Powder mixer in mint condition with self-priming centrifugal pump Fristam FZ Manufacturer: Fristam Type PM 02 17-52 Year of construction 2022 Serial No. 097274 0004 309372 Total weight 420 kg Capacity 5-10 m³/h Centrifugal pump type FZ Power 4.0-5.5 kW Homogenizer FSP 3522 Power 4.0-11.0 kW Dimensions: L 1700 mm x W 1000 mm x H 800 mm

3 x dosing systems, including 4 x PBS fluid tanks built in 2008 Auction-ID: A1-45447-20

Motor power: 1.5 kW Voltage frequency: 120 m3/h

With filter system ESB type AA 600 Compressed air protection class: IP54 Vibrating motor: 2 x 0.75 kW Fan motor: 2.2k W Total connected load: 6 kW Filter area: 2 X 72 m² Number of cartridges: 2 X 4 Extraction capacity: 6000 m³/h Air pressure maximum.8 bar Cleaning pressure: 7 bar, Including: 2 x ZA 02 lifting device, 8 Automatic powder gun type PG 2-AX, ESB control cabinet type 60191, Make number 600 Auction-ID: A1-45447-2

including 2 x PBS fluid tanks. Auction-ID: A1-45447-21

including 1 x PBS fluid reservoir. Auction-ID: A1-45447-22

Degree of protection: IP 54 (dust protection and splash water protection) Extraction capacity: 4000 m³/h Filter area: 30 m² Extraction capacity: 4000 m³ Dimensions cabin: 1900 x 1720 x 2720 mm (L/W/H) Auction-ID: A1-45447-19

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Y&J:1984, 3 silos, 800 mm diameter x 1400 mm total height, with manhole lids, 3 vibration discharge floors; Inlet: 800 mm, outlet: 168 mm, height 570 mm, 1 suction filter with sack shake, filter area: 2.3 m2, 3 blow-through locks for conveyor system.

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 25,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 8,390 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Tank Tank Plant Storage Tank Diesel Filling Tank Heating Oil Tank Tank System Diesel Tank Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Leng ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 piece plasma nitriding system Manufacturer: 1 piece used plasma nitriding system (tandem system) Dimensions: Diameter 1500 mm x 1000/2000/3000 mm (depending on whether 1/2/3 segment attachments be used) El. Connection value: 280 kVA It also includes an N2H2 fumigation device as well as an ammonia container. The plant was renewed in 2005. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

Cat. No. 10-1070 New Complete continuous distillation and rectification plant (DRA) for the production of 10,000 Ltr/day - Fab.Eurolux Fine sprite or neutral alcohol made from starchy and sugary raw materials For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...