powder plant used for sale

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

General SKU226Y116 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor35 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l. (580 l.) Vessel sizesø 880 x 1320 mm Dished bottomcheck Dished top sidecheck With jacket45 l. Max. temperature140 °C, Jacket: 180 °C With paddle stirrerHydrolysis stirrer Motor4 kW Speed mixing shaft7—84 rpm With homogeniserConti-TDS Motor22 kW, 300—3600 rpm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General MakeYstral SerialY-PS 638134 TypeYstral Process System Year of construction2009 With switchgear(as is) Floorspace5,40 x 5,00 m Total height3,60 m Weight7000 kg Extra Spe ...

General SKU226Y118 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General MakeGEA Wiegand Serial354320.90-1 Year of construction2015 Floor space3,19 x 1,27 m Total height1,92 m Weight800 Extra information Main components — One sanitary process/buffer tank (524 L, unpressurized, closed design, with cooling jacket, spray ball for CIP, DN200 hand-hole), with magnetic stirrer, 0,55kW, 400V, 369rpm — One closed-loop RO membrane unit, product-contact parts in stainless 1.4404 — Feed pump, 200 µm edge-gap strainer, tube-bundle heat exchanger (loop cooler), one 3838 membrane housing, control and sampling valves, safety/relief valve Flow rates — Feed pump (41P01): max 1,200 L/h (~1.2 m³/h at 55 bar) — Loop pump (01P01): max 15,000 L/h Pressure / te ...

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

NANOFILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION, WHEY CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

General SKU271Y422 MakeChrist SerialCWD 73530A Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4404 (316L) General TypeUltrastil TW-UF 1005 Osmotron 1000 soft Select Loopo 100 Year of construction2008 LocationBarneveld Mounted on wheelsOn skid Floor space4,00 x 1,40 m Total height2,60 m Weight2200 kg CEcheck Extra information Cap. 1000 l/h @ 20°C,  with 2x BBK (volume 140 l) MBS ultra filter (volume 16,76 l) 4x horizontal tube filtration, Inge ultrafilter 4x, Grundfos pumps Bewades UV-unit Siemens touchscreen control (3-doors control cabinet) BWT, test unit, type Testomat 2000, Christ stainless steel water tank, volume 3000 l, PP water filter tank and salt tank Cap. 1.000 Ltr/Hr Fine chemicalsOther chemicalSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPIMiscellaneous filte ...

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGEN Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change ...

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of p ...

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Available standard sizes; 320x600mm 320x650mm 320x1000mm 320x1200mm Available polyester filter media density; 160 g/m2 200 g/m2 260 g/m2 Demands of different sizes and specifications can also be manufactured.

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Machine is new. Has not been used! Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curt ...

POWDER ENAMEL COATING EQUIPMENT HIGH ENAMELING COVERAGE MANUAL OR AUTOMATIC MADE IN TÜRKİYE COST EFFECTIVE, GOOD QUALITY AND LONG LIFE TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Protection class : IP 54 Operating temperature :-20-50 ° C Nozzle : Ø16-20-24mm deflectör + Nozzle

Manufacturer: Heiche Model: HEIS02 Machine type: Powder coating line Year of manufacture: 1999 / 2013 (conversion) Status: Operational / Ready for use Technical Specifications - Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m - Maximum workpiece window: 1,150 x 880 x 350 mm - Maximum load per metre: 60 kg on 2 brackets - Compatible materials: Steel, aluminium, stainless steel, zinc die-cast - Coating thickness: 40 - 200 microns - Conveyor speed / throughput: 0.3 - 3.0 m/min - Noise level: less than 85 dB(A) - Control system: Siemens S7-1500 - Operating software: ICOM (upgraded 2024) - Operating modes: Manual and automatic - Conveyor system: Chain conveyor - Number of pre-treatment baths: 8 - Automatic powder coating booth: 1 - Manual powder coating booth: 1 - Drying: Adhesive water dryer + curing oven - Loading / unloading: Manual along the chain conveyor Utilities and C ...

General SKU300U900 MakeDott. Bonapace TypeMC-50 No.01/04 Year of construction2004 LocationBarneveld Main Features MaterialStainless steel Specified Features - Powder filler Powder fillercheck MaterialStainless steel 1.4401 (316) General With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg CEcheck Extra information 50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Poedercoatunit met Gema handpistool + recuperatie/filter Uithardingsoven, afmetingen van de binnenkamer: - 2000 mm breed - Hoogte: 1500 mm - 1500 mm diepte

Description Item #9008 - POWDER SACHET MACHINE Manufactured by VOLPAK Duplex Sachet Machine Model S-240-D set up to do individual sachet size 70 x 70mms, duplex at 50 strokes per minute, (100 sachets per minute) Suitable for maximum size sachets of approx.150 x 150mms For Preprinted foils, there is a photo electric cell to recognise a mark on the foil It was being used for packing Herbs & Spices, most products were dry salt based” products Foil Transportation through machine id done with Pins Opening of the Bags/sachets by suction cups Including Twin Auger Dosing unit Including MARKEM SmartDate X40 Coding Unit 415Volts, 50Hz, 16.2 Amp

Description Item # 9270 – Coating/Powdering Drum This machine is designed for coating products with sprinkling materials such as desiccated coconut, vermicelli, nonpareille, granulated sugar, powdered sugar, cocoa powder, flavorings, nut or almond pieces. Manufactured by WOLF Model WPD-400 Year 2024 Working width: approx. 400 mm Drum diameter: 400 mm / Drum length: 870 mm Power consumption: 0.3 kW Rotation speed: 7–9 rpm Conveyor speed: 2.5 m/min Overall dimensions (L×W×H): 1555 × 1015 × 530 mm Compressed air consumption: 10 l/min Electricity: 220 V, 50 Hz

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.

Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Unused packaging machine made by HASTAMAT in a set with a multihead weigher (14 heads). The packaging machine forms and seals stabile bags / sacks with a volume of approx. 0.5 - 5 kg. Scale has 14 heads. New 2012.

Year of manufacture 2001 Dry pollinator Grafix Powder duster for sheetfed offset suitable for Heidelberg SM / CD 102 Delivery date: immediately Price on request. We supply and install worldwide.

General SKU254W461 LocationBarneveld CEcheck MakeExakta Pack TypeExa AF 25 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler Powder fillercheck Auger fillercheck Bag fillercheck With screw dosingcheck Number of dosing heads:1 Screw diameter15 mm With motor1,5 kW, 230 volt With hoppercheck Hopper sizesDia. 500x500 mm With mixer in hoppercheck With conveyor beltcheck MaterialStainless steel 1.4301 (304) General No.105-20171-002-1014 Year of construction2014 Mounted in framecheck With switchcheck Floorspace0,90 x 1,10 m Total height2,35 m Weight250 kg Extra information With mobile packaging unit: type: Exa compacta 330. packaging cap: 2-8 oz, 1-2,5 lb. (57-225gr, 0,45-1,13kg) bag width: 100-280 mm. Bag seal unit, bag magazine. Total size 1,75 x 0,80 m, height 1,65 m, weight 400 kg, with Delta control, 1,2 kW, 230 volt.  ...

General SKU401W1244 MakeAva-Huep LocationBarneveld TypeHTC2100 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breaker3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) General No.5974 Year of construction2009 Floorspace5,72x1,76 m Total height1,36 m Weight5000 kg Extra SpecificationsWithout outlet lith.paddles are equipped with hardop welding.Fine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesBiopharmaceuticalOther pharmaceuticsFood addi ...

General SKU316S1017 LocationBarneveld Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity1200 Ltr. Sizesdia. 1280x1350 mm Conical height600 mm Conical bottomdia. 400 mm Dished topcheck Manholedia. 300/450 mm Inletdia. 200 mm Top connectionsdia. 95 mm Outletdia. 400 mm MaterialStainless steel General Makeunknown missing type plate Floorspace1,45x1,45 m Total height1,5 m Weight250 kgFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SugarAnimal feedSilosOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicOintmentsPowdered foodsPaints & coatings-Industries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemica ...

General SKU359U941 MakeAVT Europe No.2016-110110 Year of construction2017 Mounted in framecheck Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler Powder fillercheck Number of dosing heads:1 Capacity140 l Dosing with vibro feederscheck With hoppervolume 140 l MaterialStainless steel, Stainless steel 1.4301 (304) General LocationBarneveld With switchcheck Floorspace2,0 x 1,6 m Total height3,2 m Weight990 kg CEcheck Extra information With lifter, type PW-2/250. load cap. 380 kg. lift range 1450-1950 mm. dim. 1680x1600x3175 mm. 400 volt, hopper, Flintec weighing unit, type FT-13, range 2-6000 gramm, e=40 gramm, digital control StarchSpicesCatalysts & fillersBiopharmaceuticalFood additivesSugarSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder fillersTea, herbs & coffeeGeneric medicinesPowdered foodsAVT EuropeIndustrie ...

General SKUR0452 MakeAZO GmbH &: Co KG (D) LocationBarneveld TypeD128/D350xD500 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel General No.1244149-01 Year of construction2015 Floorspace1,0x0,8 M Total height0,6 M Weight100 Kg Extra information This docking device creates a connection with low dust levels between two system components StarchSpicesCatalysts & fillersBiopharmaceuticalFood additivesSugarSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder fillersTea, herbs & coffeeGeneric medicinesPowdered foodsAZOIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Pharmaceutical > BiopharmaceuticalIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Chemical > Dyes & p ...