127,442 used machines on RESALE, but how to find them? Machine Search
Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.
used
large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm
Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...
Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg
- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg
Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € ...
Spiral mixer Sind, 70 liters, NEW Dimensions: 1050x550x1150mm Electrical power: 1.5/2.5kW
DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...
Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun
Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Spiral mixer Sind, 170 liters, NEW Dimensions: 1230x720x1480mm Electrical power: 3.5/5.5kW
Dough divider for a tension and oil-free parting of the dough Model: Slim 1700 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel container with safety cover Power max. 1,100 pieces per hour Sub-range from 300 to 1700 gr. (depending on the type of dough) DGUV V3 tested Electronic variable speed and piece counter Weighing with manual weight adjustment Length of the treadmill 50 cm Stainless steel Machine mobile with brake Connection 400V, 1.6 kW, 16A-CEE plug New machine with 12 months warranty optional: - Output conveyor belt up to max height 1650 mm - Automatic flour spreader - Round-wire module - Funnel 90 kg - higher base Come in our big bakery machines sale!
Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 4000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.
SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...
CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...
Cazeneuve HB500 rebuilt lathe. Distance between centers: 2000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.
Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)
Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 750mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard
Reference ID PP-57928 Category Flatbed Die Cutter Manufacturer Gietz Model FSA 790 EFF Year Built 2001 Color - Impression - Working Hours - Speed 5,500 sheets/h Max. size 790 x 560mm Min. Size 297 x 210mm Condition Good Location Europe Availability Immediately Machine Description hot foil stamping and cuting MABEG feeder Transverse foil: 2 axes Longitudinal foil: 3 axes Foil printing option: 2× honeycomb Die-cutting option: Included (die-cutting tool added) Hologram unit: Electronics renewed in 2020 Heating system: 6 heating zones Maximum sheet size: 790 x 560mm Minimum sheet size: 297 x 210mm Maximum stamping area: 720 x 520mm Speed up to 5,500/ hr
M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...
CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...
Key data: 660 mm, 3000 mm, 440 mm
Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...
Dough kneading machine Model: SP 10 Protective cover with shutdown Table machine for max. 6 kg. flour Spiral kneader for max. 10 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 400 watts, 2 amp. Weight 35 Kg. Dimensions: 300 x 510 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop !
ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...
2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...
Sliding Table Saw Milling Machine Planing Machine Slotted Hole Drilling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: BF6-31 YOC 1990 Format sliding carriage 1.6 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Boom table Miter stop Motor power main motor 3 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 3 KW Milling fence with fine adjustment Dressing thickness planing machine Planing width 31 ...
Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant
Dough kneading machine Model: SP 15 Protective cover with shutdown Table machine for max. 8 kg. flour Spiral kneader for max. 15 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 550 W, 2.5 Amp Weight 40 kg Dimensions: 340 x 550 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Visit our great sales shop!
Dough kneading machine Model: SP 20 Protective cover with shutdown Table machine for max. 12 kg. flour Spiral kneader for max. 20 kg. dough Speed infinitely adjustable with timer DGUV V3 tested Connection 230V, 1100 W, 5 Amp Weight 50 kg Dimensions: 400 x 630 x 550 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop!
Key data: 690 mm, 2255 mm, 2500 1/min
Basic machine data Used CNC Lathe from SMEC (SAMSUNG) Make: SMEC (SAMSUNG) Type: PL 45LY Year of Make: 2014 Condition: Mint Control: Name: FANUC OI-TD FANUC Manual Guide (dialog program) Travels: x-travel: 350 mm // y-travel: +/- 60 mm (120 mm) // z-travel: 2250 mm Technical data: • C-axis • Max. speed: 2500 rpm • Swing diameter over bed: 775 mm • Max. turning diameter: 690 mm • Max. turning length: 2255 mm • Hydraulic 3-jaw chuck: 450 mm • Rapid traverse: x = 20 m // z = 18 m • 12 tool positions • BMT75 interface • Bar passage: 118 mm • Hydraulic tailstock (programmable) • Hydraulic bezel SMW 30-245 mm • High-pressure coolant pump up to 30 bar • Chip conveyor • Man. Tool Measurement Arm • Signal light • Tool package included with machine Incl. 4 driven tools 2 x Axial 2 x Radial The machine is in mint con ...
Cutting machine for small biscuits Cutting - Jack with inlet shaft Table unit made of stainless steel Performance up to approx. 2000 rolls Cutting height adjustable Pastries max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, plug-in Dimensions (WxDxH) in mm: 800 x 440 x 470 New device with 12 months warranty optional: - Driving table come to our bakery machinery warehouse!
maximum number of results exceeded
please refine your search
