127,516 used machines on RESALE, but how to find them? Machine Search
1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for single phase 230V 50Hz. Set for Vitop bags/taps.
1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for 3-phase 400V 50Hz. Set for Vitop bags/taps. With Inoxpa pump and Bürkert Flow 5030 PVDF wheel flow-meter.
This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator ., Capacity: 2000 cps/hr , Filling Type: Piston Filler , Filling Volumes : 500-1000 gr , Controls: Siemens HMI , Cup disinfection: Peroxide , Film Disinfection: UV , Cup Diameter: 120 mm, Film application: Heat sealing and cutting off roll , Over cap: Plastic lid after sealing
For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible. ...
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.
Tetra Pak TBA19 200 ml Slim Aseptic Filling and Packaging Line Complete aseptic carton filling and packaging line designed for 200 ml Slim cartons. This line combines proven Tetra Pak filling, straw application, shrink wrapping, and secondary packaging equipment, making it an ideal solution for dairy, juice, and beverage producers seeking reliable aseptic packaging technology. Line Configuration - The system includes the following Tetra Pak equipment: - Tetra Pak TBA19 200 S Filling Machine - Tetra Pak Straw Applicator 21 - Tetra Pak Multi Shrink Wrapper TFW 72 - Tetra Pak Cardboard Packer 70 - This configuration provides a complete production flow from filling to final carton packaging. 1. Tetra Pak TBA19 200 S Filling Machine - Manufacturer: Tetra Pak - Model: TBA19 200 S - Specification: 648160-0101 - Year of Manufacture: 1998 - Operating Hours: 16,727 h - Filling ...
Cito Pac suppository filling line Filling, cooling, and sealing machine for suppositories in preformed plastic packages. Revision made in 2023 • two filling points • filling machine SFD10CP • dosage per filling point: from 0.5 to 3.5ml • cooling tunnel: KTE-10 CP • cooling path: 25 m (approx) • sealing machine: BST-10 CP • production capacity: up to 10,500 suppositories/hour (approx)
MACOFAR CAPSULE FILLING MACHINE, MODEL CD-40 Year of manufacturing: 2003 Automatic intermittent motion capsule filler in pharma grade stainless steel. suitable for small to medium production runs. In excellent overall condition, well looked after and serviced on regular basis. CHARACTERISTICS • vacuum assisted dosing/filling stations • minimum format parts for fast changeover • CE marked PRODUCTION • Output: up to 40,000 capsules per hour • Production: for filling powders, pellets and tablets (including various possible combinations between powder, micro tablet and pellets) • Included capsule size format sets: 0/2/4 ENERGY CONSUMPTION • Standard voltage: 380 V – 3ph 50 Hz • Rated powder: 3,5 kW • Air consumption: NI/ min 150 DIMENSIONS • Size: 1500 mm x 1200 mm x 1800 mm; Weight: 1100 kg
TONAZZI TUBE FILLING MACHINE COLIBRI 1001 Year of manufacturing: 2003 Automatic machine for filling and sealing tubes. Used in various industries, like the cosmetic, pharmaceutical, food and chemical. CHARACTERISTICS • Ideal for small to medium and large productions • Intuitive operator interface • Includes devices to protect the operator during operation PRODUCTION • Mechanical speed: up to 100 tubes/min. • Tube Size Range (Ø): 10 ÷ 50 mm • Tube Size Range with cap (H): 50 ÷ 250 mm • Filling Capacity: 3 ÷ 390 ml • Mechanical Speed: up to 100 ENERGY CONSUMPTION • Water Consumption (for plastic or laminate tubes only): 180 l/h • Installed Power for plastic or laminate tubes: 9.2 kW • Installed Power for metal tubes: 6.7 kW • Max. Air Consumption at 5 bar (basic machine): 4000 l/h DIMENSIONS • Size (with stirrer): 2150 x 1260 x 2100 mm; Approx. ...
- 1-lane rotary runner - Max. 2,400 cups / hour - Up to Ø95 mm cup conversion possible - Dimensions approx. 1,300 x 1,300 x 2,000mm - Year of construction approx. 1960s (unfortunately no more nameplate)
Height=1.87 m, Overall length= 1.16 m, Overall width= 0.64 m, Net weight= 115 kg,
Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025
MONOBLOCK dosing / closing machine. Monobloc bottle filling/engraving machine intended for the cosmetic industry. Equipped with: 4 filling nozzles using cylinders 1 vacuum-operated nozzle for product equalization in all containers. Dual Engraving Head (Pick and Place) Ramp with vibrator for valve input. Filling Pump Vacuum pump Production 6000 b/h Filling capacities up to 250ml Voltage: 380 -400 VAC N Power: 2.2kW
Automatic Italian AMS Ferrari bottling line for sale Bottle lifter Posimat Bottle Washer 50-head rotary filling machine AMS Ferrari Capping machine Labeling machine Box former Grouping Well suited for e.g. water bottling, efficient and fast machine
GRONINGER FILLING MACHINE, MODEL DFVN 1000 (LF) Small filling and stoppering machine for disposable PFS and cartridges in nests. Usable for testing sizes and small batches, offers processes identical to those of a high-output system. Supports manual nest handling under laminar flow. Built in 2007. - Available with 1 ml format - Only 50 operating hours - Clear separation between the manual handling section and the fully automatic production section. - Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination - Dimensions: 1,500 ｘ 1,135 ｘ 2,000 mm PRODUCTIVITY - Max. Output: 4.800/hr - Filling volume: 0.5 - 50 ml - Supported package: 20/30/42/64/100/160 nest
Vacuum filler MBV / Italy Type Synchrofill Hot filling 35 filling stations + SV4 screw capper Short tube Max. approx. 7,000 containers / h Container 1.00 liter glass bottle Year of construction 2000 FILM AVAILABLE - PLEASE REQUEST
Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.
Can filler and seamer Markl / Bonicom Filler: Markl Bavaria 16L with 16 filling valves Seamer: Bonicom F 120 with 2 seaming heads Capacity: approx. 5.000 cph Can size: 330 ml and 500 ml standard cans Can type: 211 / 202 good condition
Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper
"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...
Linear balance for powders and granules. Weighing takes place directly in the container to be infected (buckets, cans, cups. conversion to bags or sacks possible). Weighing range up to at least 10 KG German make. Very good condition. Partly outdated. Tested and functional. With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.
A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.
Filling, closing and labeling system for wide-mouth jars with TO closure, set up on:, 125, 212 and 720 ml jars with high-rimmed closure TO58, 70 and 82, Output: up to max. 2,500 glasses/hour, The system was delivered in 2025 but has not been put into operation; it is essentially new and unused., consisting of:, Feed turntable, Stainless steel turntable, diameter: approx. 1000 mm, .florin-machines/angebote/7775825-new-2025-nn-drehtisch, Tecno Alimentare RTV filling and sealing combination, Monoblock, Capacity: 20 ml to 1000 ml, Max. diameter of glasses: 110 mm, Capacity: up to 2,800 glasses/hour, Suitable for hot filling, e.g. thick products such as jams, sauces, ketchup, .florin-machines/angebote/7782691-new-2025-tecno-alimentare-rtv-fuell- und-verschliesskombination, Elvo Coding Nicole labeling machine for self-adhesive labels, Labeling machine for self-adhesive labels for cylindrical j ...
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
Output: 15000 U/h // Bottle Size: 1500 ML
Output: 25000 U/h // Bottle Size: 2,5
Output: 9000 U/h // Bottle Size: 5ml-2l
Volume (Max): 1000 ml // Volume (Min): 250 ml
Output: 10000 U/h // Bottle Size: 0,5
A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible.
A Hamba cup filling machine is available. Lanes: 4, max. cup diameter: 127mm, max. cup height: 130mm, nominal capacity: 9600cups/h. Machine dimensions X/Y/Z: approx. 10000mm/1700mm/2500mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.
Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...
The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres
Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Composed of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Straffbanderolierer, Fabr. Pest Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE
Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...
Glass machine for small jars approx. 4800 per h output for yoghurt in a jar Format customizable and overhaulable
- As good as new - Filling machine for 4000 cups/h - 2-bahinger rotary - Ø95 cup - Suitable for filling liquid and paste-like products - Headspace fumigation and date printer available - Servo piston doser - Filling volume 100 – 500 ml, infinitely adjustable - Servo technology and PLC Siemens -Stainless steel - Collection plate and discharge conveyor optionally available
Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) Maximum output 80 objects/min 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps 1 new replacement pump for filling range 20-100 ml Anti-drip protection through suction back Bottle feed through infeed turntable Bottle discharge through discharge turntable Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot Vacuum pump Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...
TBA 19 200 SQ in excellent condition only 11000 Hrs
Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...
maximum number of results exceeded
please refine your search
