pot used for sale

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency tin: INnen sechskant Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency actuation: inner hexagon Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The engine was mounted in a lathe. With motor base to align and fasten. Cabinet size T x B x H: 470 x 1200 x 1000 mm Engine size T x B x H: 1000 x 1100 x 1000 mm plus control with potentiometer for variable speed Pully-size: 180 mm Diameter of shaft: 50 mm v-belt pulleys Total weight: approx. 500 kg A total of 2 PCs. EURO-pallets With manual and electronic schema

Used swirl sieve refining XW3E25. Throughput starch milk of processing 200 tons of potatoes/24 hours, the engine 13 kw, 1400 rev/min, documentation available.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

P41 - Used approx. 3m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Rotband tank, good condition. overground tank, lying horizontally, on 2 steel bases Content: ca. 3m³ / 3,000 litres Material: Polyester / GRP Length: ca. 2,59m inside / 2,70m outside Width: ca. 0,98m inside / 1,05m outside Inside height: ca. 1,52m Height incl. base: ca. 1,90m Made by Rotband, a very good quality. Lid on the front, several in- and outlets. The container can be a storage tank for liquid feed, whey, potato steam skins, molasses, water, manure, AHL / ASL, seeping juice, canola oil, or be used as a rain drip tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tan ...

used approx. 6 m³ / 6,000 litres polyester tank / GRP tank, transportation tank, Maier Rotband-tank, good condition. dimensions: height = 3.0 m (tank) = / 3.50 m (total) depth = 1.90 m (total) width = 1.22 m (inside tank) / 1.28 m (outside) Upright standing overground tank on base. Dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise  ...

P30 - used appr. 3 m³ / 3,000 litres polyester tank / GRP-tank, aboveground, transport tank, good condition. Dimensions: l = 1.90 m; d = 1.70 m; h = 2.00 m (including base) Horizontally lying tank, incl. 2 steel base, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-ta ...

P55 used approx. 15 m³ / 15,000 litres polyester tank / GRP tank lying horizontally, aboveground, two steel bases, in good condition. dimensions: appr. diam. 2.00 m x length 4.60 m, height including base 2.30 m Juno tank on 2 steel bases, dome on the front side, multiple connections, in- and outlets, includes stainless steel valves / ball valves as shown in the pictures etc. The container can be used as a storage tank for many different media, such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in ...

P59 - used appr. 25 m³ / 25,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom, manufacturer Erka. Vertically standing, aboveground storage tank, water tank, whey tank, feed tank, brine tank, slurry tank, etc. capacity: 25m³ / 25,000 litres material: GRP tank dimensions: appr. Ø 3.00m x height 3.70m weight: appr. 2.5t Multiple connections, see pictures. The tank is in used condition, according to the age signs of wear are present. The container can be used as storage tank for water, whey, stillage, potato steam skins, liquid feed, manure, seeping juice, rapeseed oil, as rain collection tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...

P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...

P64 - used appr. 46 m³ / 46,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom tank, Skoda tank. volume: appr. 46 m³ / 46,000 litres material: polyester / GRP diameter: Ø appr. 3.10 m height: appr. 6.50 m Skoda tank, aboveground, vertically standing tank, flat floor, dome upon the tank body, multiple connections, in- and outlets. Tank as shown on the pictures. The container can be used as a storage tank for many different media, such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rainwater tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar on ...

P62 - used appr. 5 m³ / 5,000 litres polyester tank / GRP tank, aboveground, horizontal, on 2 steel bases, Rotband tank, in good condition. volume: appr. 5 m³ / 5,000 litres material: polyester / GRP width: appr. 1.10 m height: appr. 1.90 m (tank) length: appr. 2.50 m (tank) Horizontally lying tank, including 2 steel bases, dome on the front side, multiple connections, in- and outlets, manufacturer Rotband. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rainwater tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar o ...

- stufenloser Vorschub (0 - 3m/min) über Potentiometer einstellbar - Ein- und Auszugstischverlängerung - stabile Gusskonstruktion des Schleifkörpers - max. Schleifbreite 800mm, bei zwei Schleifdurchgängen - Einzugsteppichspannvorrichtung über Federsystem - Verwendung von handelsüblichen Schleifbändern - max. Werkstückhöhe 130mm - Walzendurchmesser 132mm, Breite 405mm - Motor 2,1 PS / 230 V Lieferumfang: - Schleifband, Untergestell, stufenloser Einzug - Abmessungen L=940, B=640, H=136 mm - Gewicht 96 kg

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new

P63 - used appr.4 m³ / 4,000 litres polyester tank / GRP tank, aboveground, standing vertically, in good condition. volume: appr. 4 m³ / 4,000 litres material: polyester / GRP height: appr. 2, 30 m (tank) / 2, 60 m (total) width: appr. 1, 35 m length: appr. 1, 86 m Aboveground, vertically standing tank on a steel frame. Dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL / ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give  ...

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

P74 - used appr. 18 m³ / 18,000 litres polyester tank / GRP-tank, aboveground, on 3 steel bases, in good condition. volume: appr. 18 m³ / 18,000 litres material: polyester / GRP length: appr. 5.80 m height: appr. 2.40 m total diameter: appr. Ø 2.00 m Aboveground storage tank, round shape, resting horizontally on 3 steel bases, dome on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater collection tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold b ...

Automatic filling machine for closed and / or open ampoules with automatic loading and unloading. The machine automatically loads the ampoules 6 by 6, turns them upside down, opens them, turns them over and fills them with 6 syringes and seals them, unloading them on a tray. All these operations are carried out with a single operator. The machine also works for open blisters. Formats included for 1-2 ml The equipment comes with its laminar flow Technical data: Hourly production: 12,000 units. Maximum diameter of the vial: 19 +/- 19.5 mm Dosage: 1 +/- 10 ml. Feed to load: width max. 310 +/- 315mm - width min. 160mm - length max. 500mm Discharge: width max. 365mm - width min. of the individual basket 160mm - length max. 500mm Machine measurements: width 2300 x length 1940 x height 1600 mm Net Weight: 460KG Gross Weight: 780KG Installed potency: 220-380V 50Hz Absorption A. 220 ...

P81 - used approx. 6 m³ / 6,000 litres polyester tank / GRP-tank, Speidel tank, aboveground, on 2 steel bases, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / fiberglass length: approx. 2.90 m width: approx. 1.60 m height tank: approx. 1.60 m height total: 1.92 m Manufacturer Speidel, horizontally standing, square, aboveground storage tank, incl. 2 steel bases, dome on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this t ...

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...

P78 - used approx. 7 m³ / 7,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 7 m³ / 7,000 litres material: polyester / GRP width: approx. 2.00 m length: approx. 1.50 m height: approx. 2.70 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

P75 - used approx. 6 m³ / 6,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP width: approx. 1.50 m length: approx. 2.00 m height: approx. 2.80 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

P79 - used approx. 6 m³ / 6,000 litred polyester tank / GRP tank, Juno-tank, aboveground, vertical, on four bases, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP height tank: approx. 2.70 m overall height: approx. 2.84 m width: approx. 1.24 m Manufacturer Juno, vertically standing, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank h ...

P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Water tanks for crop sprayers, standing or lying flat, 3,000 L, 4,000 L, 5,000 L, 6,000 L and more. Used polyester tanks / GRP-tanks, water tanks, barrels, storage containers for field sprayers. We offer vertical or horizontal tanks, round or square shape, made from robust fibreglass, with several in- and outlets for filling your sprayer. Our tanks are used, have been professionally cleaned and are in good condition. The containers can further be used as storage tanks for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, for rainwater collection and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already bee ...

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Whole bagging line for chips potatoes, for dry fruits, vegetables in working conditions. Compused by: Double waiting hopper. Double infeed conveyor. Double weigher for chips potatoes and device for sticky products. Bagging machine with 3 forming tubes for bag width: 130, 150 and 75 mm. Outfeed conveyor. The machine can be check it working. Still installed.

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Basic unit type VT 7021 Operator terminal color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature selector limiter min./max. serial interface RS 232 Schuko socket potential-free contact for test material shutdown Refrigeration unit air-cooled 1 door lockable, one-hand operation Calibration of 2 temperature values Mobile version 1 bushing, NW 80 mm, right Test room volume 210 liters Temperature range -70°C to +180°C Temperature deviation over time ± 0.2 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min heat compensation 800W  ...

Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth  ...

P80 - used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, aboveground, vertical, on four bases, in good condition, newly painted. capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP height tank: approx. 2.30 m overall height: approx. 2.50 m diameter: approx. 1.66 m Vertically standing, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alre ...

P132 - used approx. 20 m³ / 20,000 litres polyester tank, GRP tank, Juno tank, in good condition. technical details: capacity: approx. 20 m³ / 20,000 litres material: polyester tank / GRP tank manufacturer: Juno weight: 1.5 tons dimensions: Ø 2.00 m x approx. 6.50 m long / total height including base 2.40 m Used storage tank in good condition, aboveground, incl. steel bases, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that thi ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

Turning diameter: 420 mm Turning length: 2000 mm Turret positions: 12 Positions ATC: 12   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: Mazatrol Matrix Nexus CNC turning lathe MAZAK - QUICK TURN NEXUS 350-II MY CNC Lathe Ø 420 x 2.000 mm with C & Y Axis 7004 = Mach4metal Make: MAZAK Type: QUICK TURN NEXUS 350-II MY Control: Mazatrol Matrix Nexus incl SMW Autoblock steady rest incl. Radial & Axial driven tools incl. Tool eye incl. CROMAR Coolant & Chip conveyor Under power in Germany Max. turning Ø: 420mm X-Axis:         260mm Y-Axis:         100mm Z-Axis:         2.000mm Spindle bore:   110mm Speedrange:     2200Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools: 4000Rpm Pi ...

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

Hydr. Double-column drawing press make ECKOLD type UPP 60-10Mash. -No: 646/230 withHydraulic unit HAD 500/2, machine -No: 276/477Max. Press force: 60 tPassage between the uprights: 1400 mmTable width: 400 mmInstallation height: 650 mmWith- Tools for the production of drain potsxa0xa0xa0 for soil drainage, there are 3 sizes available- 2 drawing tools for top part of inlet boxesxa0xa0 Drm. 200 mm for 1.5 and 2.0 mm material thicknessused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjustment- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted ...