positive used for sale

General SKU234T259 LocationBarneveld MakeSeepex TypeMD 003-12 Mach.No.267899 Main Features MaterialStainless steel Motor0.37 KW Specified Features - Positive displacement pump MaterialStainless steel Positive displacement pumps Pumpcheck Number of pumps:1 With motor0,37 kW, 230/400 Volt (1380 rpm) With variable speed drive91 rpm InletG 1 OutletG 1/2 Information Mounted on framecheck Total height0,6 m Floorspace0,6x0,6 m Weight100 kg Extra Specifications2 stages pressure: 12 bar. Max. grain size: 1,4 mm Positive displacement pumpsSeepexPumps > Positive displacement pumpsBrand > Seepex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU322P734 LocationBarneveld MakeMaso Process Pumpen GmbH (D) TypeSPS-6 Sine Pump Mach.No.135630108 Main Features MaterialStainless steel Motor55 KW Specified Features - Positive displacement pump MaterialStainless steel Positive displacement pumps Pumpcheck With motor55 kW 500 Volt Inletdia. 130 / 80mm Outletdia. 130 / 55mm Information Year of constructionunknown Mounted on framecheck Floorspace2,2x0,8 M Total height0,8 M Weight1000 KgPositive displacement pumpsMasoPumps > Positive displacement pumpsBrand > Maso What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

There are two identical positive displacement pumps available, rotational speed: 320/min, power: 1.1kW, year of construction machine 1/2: 2015/2019, with Frequency Converter NORD SK 200E-111, Seal Supply System EagleBurgmann QFT2000 and spare parts, machine 1 has a steel construction.

Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)

Displacement pump, pressure pump, water pump -Drive: 2.5 kW -Speed: 1425 rpm -Pipe connections: DN 50 -Dimensions: 860/330/H410 mm -Weight: 90 kg

HM Corner - Cutter Head - Face Milling Cutter with Inserts. Diameter: 315 mm. Height: 90 mm Bore diameter: 62 mm. Number of inserts: 18 pieces Dimensions of the inserts: Rectangular, 12.8 x 12.8 x 5 mm, positive. Good used and ready to use, without damage to the panel seats. Shipping possible in consultation with the forwarding agent. or self-collection. The part can be viewed in consultation and is immediately available.

The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. STANDARD FEATURES: Labelling machine balcony construction stainless steel executed. Electrical cabinet on machine board. Behind easy access from behind to electrical and mechanical parts; large door  ...

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Key data: 200 mm, 400 mm

Machine Details Stock-No. 1105-03978 Type of machine CNC Lathe Make BENZINGER Type TNI B 6 Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time by arrangement Freight base EXW Technical details Bar Material Dia. 42 mm Chuck diameter 130 mm turning length 300 mm turning speeds 7000 rpm positive location each C-axis, 0.001° degree Sub spindle ja/yes Bar Material Dia. 32 mm turning speeds 31-6,300 rpm positive location each C-axis, 0.001° degree turret (x-stations) 2x 12-speed VDI 25 driven tools 2x 12 control FANUC 31 I MODEL A coolant emulsion total power requirement 25 kW weight of the machine approx. 4 t dimensions of the machine approx. 2,85x 1.7 x 1.8 +IEMCA S m Accessories Tool holder 2 rigid, 3 driven pcs/off Additional information NICE MACHINE 7 AXIS

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

STANDARD’s 700DD Series pumps are engineered to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pump is provided with a 1.5 kW TEFC electric motor. Technical Specifications: Design Progressive Cavity / Positive Displacement Max. Viscosity = 100,000 cps (mPas) Discharge Port 1½ (38 mm) Hose Barb Stator Materials PFTE Mechanical Seal SiC / Viton®/ SiC Immersion Length: 1120 mm Wetted Material Tube & Rotor Assembly: Stainless Steel 316 Stator Material PFTE Motor Drives IEC Fittings Threaded design enables operator to disassemble pump quickly for cleaning, maintenance and inspection Mounting Flange B14/C140-160 Max. Flow Rate: 26 LPM based on water Max. Discharge Pressure: 12 bar Max ...

with tow roller, longitudinal and transverse ribbing for the production flour-free broken goods, with all Orginalteilen, with two roller motor for positive-drive of both rollers

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

Electronic height and length measuring device make SUMESS type VM 300Zero setting possible in the entire measuring rangefrom the zero position the dimension is positive + upwards and negative - downwardsMeasuring range: 300 mmWith- Digital dimension display- Display mm or INCH, step 0.0001- Display setting 002 - counting step 0.002- Display setting 005 - counting step 0.005- locking- fine tuningused, from a company liquidationin good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consists of: - 4-pliers perfect binder BQ-470 PUR-D (nozzle application system) - PUR adhesive system incl. 2kg bevel melt Horizon BQ-470 PUR-D Bookbinding Plant for photo book production. Soft or hardcover Details: BQ-470, PUR-D2 Horizon PUR nozzle, 4 pliers perfect binder -Format: Paper size: min. 145x105mm; max. 320x320mm Spine: min. 1mm; max. 65mm Envelope size: min. 225x135mm; max. 660x320mm - Output: max. 800 cycles/h - Grammage: Content: 60-135g/sqm/ Envelope: 80-300g/sqm - Envelope stack height: max. 150mm -Groove: 4-fold creasing positive/negative 2-fold creasing and variable gauze feed - Binding capacity: with 2kg PUR container, format A4: approx. 6,500 pcs. At 2mm block density with 0.5mm application approx. 650 pcs. At 20mm block density with 0.5mm application - Powe ...

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

Used Salvagnini P4 2525 panel bender in working order, with positive and negative Cla blades, year 2004

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 039.0 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

60″ x .135″ x 20,000Lb Dahlstrom CTL Line Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

1 - Aerzen GM7L - Rotary lobe blower unit Delta Blower generation 5. Positive pressure. Suction pressure: 0,613 bar Discharge pressure: 1.013 bar Power : 7.5 kW Flow rate: 420 m3/h Oil free ATEX classification Weight : 381 kg Equipment sold with original filter + a new one. Blower with silencer, frame integrating a resonance absorber, machine feet, connection to the body with silencer for non-return valve, safety valve, vaccuostat with pressure gauge. 2 - Infastaub MKR 0-1/20 - Secondary safety filter Temperature: 0?C/+40?C Filter surface: 20 m2 Volume: 360 m3/h Structural resistance: - 500 mbar Filter quality: H14 Filter body : Stainless steel ATEX classification Equipment sold with original filter + a new one.

The positive displacement blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

On offer are three Biomek systems by Beckman Coulter; two i5 and one i7 system. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machine's configurations are as follows: BIOMEK i7: Hybrid configuration with one 96-channel 1-300μL pipetting head and one span8 pipetting head that can be operated in either 5-1000μL pipetting mode or in continuous dispense mode. This unit also includes a roof-mounted HEPA unit. first BIOMEK i5 comes with a 96-channel 5-1200μL pipetting head, a side cabinet and an integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head, which can be operated in either 5-1000μL pipetting mode or in continuous dispense mod ...

Linco inside / outside washing machine of 16 units C.W. Unique in design , this machine has been developed by Linco to out-perform and surpass all the other machines available. Special adjustable nylon / stainless nozzles enter the bird to ensure thorough inside washing, no possible damage, and a positive opening in the neck cavity of the bird to ensure drainage. Water sprays on the outside of the bird remove any debris or stains left after eviscerating.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...

POR Super Oscar briquetting machine – after technical review – Italian production – year of production 2010 – sleeve and oil cooling – Odometer Reading 1659.10 mth TECHNICAL PARAMETERS: Briquette diameter 80 mm .max. Briquette Length 80 mm capacity 350 kg/h engine power 27.5 kW hydraulic crushing 1400 kg/cm2 .max. Operating Force 150 bar oil capacity 600 liters hopper diameter Ø 1200 mm container height 90 cm dimensions (length/width/height) 2500 x 1900 x 1800mm net weight 2400 kg Super Oscar PLUS is equipped with an enlarged feed drawer and specially hardened sleeves. The increased hardness of the sleeves has a positive effect on their service life, especially when we want to briquette various raw materials

with drip tray (positive thermal for Fujifilm PXE) and Graphoteam Compact Bridge, Forklift, Trolley

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...