pos used for sale

CNC Vertical Machining Center Gantry type Table size 5000 x 2000 mm. Travel X-axis 5000 mm. Y-axis 3100 mm. Z-axis 1200 mm. Number of tool places 24 pos. Maximum speed of the working spindle 18,000 min. Tool holder HSK 63. CNC Control Heidenhain TNC 530 If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Milling attachment on pos. number: 4 Controlled spindle stop device O Electric control-box Speed accelerator

Key data: 210 Heidenhain, 1000 , 51

Center height: 210 mm Center distance: 1000 mm Spindle bore: 51 mm CNC Brand: Heidenhain Make: VDF BOEHRINGER Type: DUS 400 Ti Control: HeidenHain YOP: 2006 Parat tool system with inserts C Axis indexing 360.000 Pos Handwheels X and Z Axis Swing over bed Ø:        420mm Swing over cross slide Ø:230mm DBC Turning Length:      1.000mm Spindle bore:            51mm Spindle power:           11kW Tailstock spindle Ø:     4Ø Stroke pinole:           110mm Spindle taper:           70Mk Speeds / ranges:         3000Rpm Feed rate X-Axis:        5.000mm/min. Feed rate Z-Axis:        10.000mm/min. Length:        &nbs ...

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

Siemens Control Siemens motor controllers Pos. Type Quantity 1 7UT5131-5CB01-1CA0/JH 2 2 7UM5150-5CB01-0CA0/EE 3 3 7UM5161-5CA01-0CA0/BB 2 4 7UM5111-5CB01-0CB0/GG 2 5 7UM5121-5CB01-0CB0/HH 3 6 7UT5121-5CB01-0CA0/JH 1 7 7SJ5111-5BA01-OC/DD 1 8 7SW6700-5CA00/BB 3 9 7SW6700-Z2/BB 2 10 7SW6700-5CA00-Z2/BB 2 11 7UM5000-5CA00-/CC 3 12 7XT7000-0B/cc 1 13 7XR4001-4/BB 1 14 7XR6100-0BA00/CC 1 15 Kompesograph 1 Total quantity 28 On request, we will send you the individual photos. Free Shipping

grinding diameter: 450 mm grinding length: 1500 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Steuerung FANUC 18i Maschine wird vor Auslieferung teilrevidiert nach Kellenberger Messprotokoll. -automatische B-Achse mit Hirth Verzahnung -Schleifscheibe rechts 500x80x203,2mm -Werkstückspindelstock in verstärkter Ausführung -Pneumatische Entlastung für den Werkstückspindelstock -H-Reitstock (heavy - verstärkte Ausführung) -Hydraulischer Pinolenrückzug für den Reitstock -Reitstock mit Mikroverstellung für Zylindrizitätskorrektur -Abrichtgerät am Untertisch montiert -Aktive Marposs L ...

turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2600 mm y-travel: 1600 mm z-travel: 1700 mm Control: Fanuc 16 MB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 42 x 18 m The system requires a space of approx. 42 x 18 m It is designed for fully automatic operation in 3 shifts. Components with tolerances of

x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 302 mm turning length: 600 mm control: Siemens type: 810 T tail stock: Tool changer: 12 Pos. tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mm swing diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...

Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: 7 TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the disp ...

: 26 mm : 30 mm : 30 mm : M 20 : M 24 : MK 3 : 120-2.200 U/min. throat: 293 mm : 515x360 mm : 2 x 14 x 224 mm : 90/675 mm column diameter: 115 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,0/1,6 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Tapping power dependent on spindle speed) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 250 mm height of jaw: 80 mm clamping width: 340 mm = hydr. machine vice (pos.2) - with hand crank and 3 clamping shoes - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 530 mm turning diameter: 150 mm spindle passage: 65 mm control: SIEMENS 840 C travel x1: 175 mm travel y1: +/- 70 mm travel z1: 433 mm travel x2: 175 mm travel y2: +/- 70 mm travel z2: 433 mm spindle turning speed range: 38 - 4000 U/min C-axis: 2 x tool turret: 2 x 12 Pos. number of driven tool stations: 2 x 12 total power requirement: 33 kW dimensions of machine L x W x H: 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 250 mm height of jaw: 80 mm clamping width: 340 mm = hydr. machine vice (pos.1) - with hand crank and 3 clamping shoes - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter max.: 38 mm wall strength: 2 mm bar material dia. min.: 10 mm bending radius min.: 35 mm bending radius max.: 150 mm pull up length of tube: 4500 mm bending angle max.: 180 ° accuracy of bending angle: ± 0,2 ° total power requirement: 7,5 kW weight of the machine ca.: 1,2 t - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t dimensions: 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm height of jaw: 60 clamping width: 200 mm = hydr. machine vice (pos.3) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW weight of the machine ca.: 21,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm size of pallet: 630 x 500 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 1 - 4000 mm/min rapid travel x/y/z: 10 / 8 / 10 m/min control: PHILIPS CNC 432 spindle motor: 15 kW total power requirement: kW weight of the machine ca.: 6,0 t dimensions of machine: 4,10 x 2,17 x 2,55 m acc.: hydr. swivelling head with hydr. tool clamping, chip conveyor, coolant, entire protection cabin with pallet changer (two pallets) and 60-pos. tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

Turning diameter: 525 mm Turning length: 540 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: Fusion 640 T MACH-id   4205 MAKE        Mazak TYPE          SQT 250 MS YEAR         2002 SPECIFICATIONS Swing over bed     525 Swing         300 Distance between centres       540 X Axis     190 Z Axis       575 C Axis     0.001 Controll       Mazatrol Fusion 640 T Sub spindle / Speeds      4.000 Rpm Spindle speeds live tools        4.500 Rpm Tool changer      Yes Chip conveyor    Yes Tool eye      Yes Hours      ...

x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm Control: Siemens SlimLine Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 82 / 54 Nm tool taper: SK 40 distance spindle nose and table: 120 - 630 mm work table:: table surface area: 900 x 560 mm max. table load: 600 kg T-slots: 5 work height max.: 850 mm tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg feeds:: rapid traverse: 30 m/min feed power: 5 kN feed speeds: max. 30.000 mm/min total power requirement: 32 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m Documents: Coolantsystem: elektr. hand wheel: Chip conveyor: CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V The data for this ad was created with ModulM ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: TNC 426/430 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 130 Nm tool taper: SK 40 swivellable: work table:: table surface area: 1.250 x 700 mm max. table load: ca. 1.000 kg tool magazin:: number of toolpositions: 32 (2x 16) pos. tool taper: SK 40 max. tool diameter: 80 / 130 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8,0 kg feeds:: feed speeds: 1 - 15.000 mm/min rapid traverse: 30 m/min total power requirement: 60 kW weight of the machine ca.: 8,0 t dimensions of the machine ca.: 4,0 x 4,0 x 2,7 m Documents: swarf management system: Coolantsystem: elektr. hand wheel: spindle oil cooler: tool monitoring: CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - Swivel-Milling-Head The  ...

x-travel: 1.250 mm y-travel: 880 mm z-travel: 800 mm control: TNC 430 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 500 Nm tool taper: SK 40 work table:: table surface area: 1.500 x 1.050 mm max. table load: 2.500 kg number of T-slots: 10 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 60 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 315 mm max. tool weight: 8 kg max. total weight: 100 kg feeds:: rapid traverse ( X / Y / Z ): 15 m/min feed speeds: 10.000 mm/min total power requirement: 29 kW weight of the machine ca.: 16,0 t dimensions of the machine ca.: 7,0 x 5,0 x 3,3 m Documents: Chip conveyor: Coolantsystem: Automatic Tool Changer: elektr. hand wheel: CNC - Machining Center Vertical DECKEL MAHO - DM ...

x-travel: 1.060 mm y-travel: 630 mm z-travel: 610 mm table:: 1.300 x 660 mm table weight: 1.000 Kg Control: MAZATROL Matrix number of spindle speeds: 12.000 U/min/rpm spindle motor: 15 kW Tools changer: 30 pos. operating hours: 49.546 h Spindle hours: 23.189 h - length measuring tool - 30 tools changer - refrifgeración inner tool - chip extracto The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2100 mm y-travel: 520 mm z-travel: 500 mm Control: Heidenhain type: TNC 426 table surface area: 2800x520 mm workpiece weight: 1500 kg dist. milling spindle - table surface: 200-700 mm spindle turning speed range: 12-15000 U/min spindle diameter: 90 mm spindle taper ISO: 40 Tool changer: 30 Pos spindle drive: 22 kW total power requirement: 50 KVA weight of the machine ca.: 11 t dimensions of the machine ca.: 5.500 x 2400 x 3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 60 mm cross-slide: 4 turret head: 6 Pos. thread cutting attachment: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 630 mm z-travel: 710 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. turning speeds: 30-12000 U/min tool taper: HSK 63 Tool changer: 80 Pos. Feed: 1-40.000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Doppelwendespanner Maschinennummer 0552.80.00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mm swing diameter: 2100 mm turning height: 1700 mm Control: R & D type: MTC 4 turning speeds: 280 U/min workpiece weight: 20000 kg Tool changer: 14 Pos. : total power requirement: kW weight of the machine ca.: 2800 t dimensions of the machine ca.: 3,7x3,75x5,1 m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1700 mm Table width: 660 mm Longitudinal X: 1524 mm Cross Y: 650 mm Vertical Z: 650 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mori Control MAKE   Mori Seiki TYPE    MV 65 B / 50 YEAR   1997 SPECIFICATIONS X - Travel    1524 mm Y - Travel    650 mm Z - Travel     650 mm bed / plano / portal / moving column    VMC Table Length x Width   1700 x 660 mm Table load in kG    2000 Kg Spindle Taper    Bt 50 kW power on spindle    35 Hp kW Spindle speeds / ranges    6000 Rpm ATC tool changer    30 Pos x Ø 240 x 20 Kg Coolant true spindle / Bar   Yes Bar Number off controlled axis   3 DIMENSIONS Length    3280 mm Width     2260 mm Height    2950 ...

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...

Spindle diameter: 130 mm Cross X: 5000 mm Vertical Y: 3000 mm Table length: 2500 mm Table width: 1800 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Make TOS WHN13CNC Type WHN 13 CNC Year 2008 iTNC 530 in 5 Axis Spindle diameter (mm) 130/46/3000 Table length (mm)L = 2.500 Table width (mm)W = 1.800 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 3.000 Pos ATCZ = 1.250 Number APC.W = 800 Load = 25 Ton Table index 0.001 Gr Coolant true spil 17 Bar Chip conveyor Spindle extensions Optional milling head HUR 50 Optional Milling head HOI 50  

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2 : 5.100 - Max. turning height : 2.650 - Slide adjustment : 2.000 - Stroke Tool holder : 1.250 - Cross r ...

EMAG VSC630 CNC vertical lathe, inverted spindle Line consisting of 2 CNC Pick up lathes complete with workpiece handling: loading/tilting/unloading MAKE EMAG MODEL VSC630 CNC SIEMENS 840 1998 X 1150 mm Z 500 mm Max dia 680 mm Chuck 500/630 Spindle power max 74kW / 2350 Nm Spindle RPM max 2000 Rapidi (X, Z) 30 / 20 m/min Tool turret 8 pos / 60 mm shank dia. Weight 2 x 22000 kgs Note: Visibile funzionante nel nostro magazzino - Under power in our warehouse – Unter Strom in unserem Lager Tech. Data not binding

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Longitudinal travel (X-axis): 1020 mm Vertical travel (z axis): 1020 mm Axial motion:: C = 240° Voltage 50 Hz 3x: 400 Volt Driving motor (motor power): 1.1 kW Total power required: 3 kVA Dimensions: Length: 2200 mm Width: 1300 mm Height: 2230 mm Description: Rotary Magazin 30 x ITS 148 + 150 pos 50x50

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 0 Technical data Centre height: 125 mm Distance between centres: 760 mm Grinding length: 430 mm Workpiece weight on centres max.: 100 kg Grinding wheel:: Standard Diameter: 400 mm Width: 63 mm Bore: 127 mm Rotatable grinding spindle head (b-axis) Indexing manually: 2.5° Longitudinal slide:: Z Max. travel: 650 mm Resolution: 0.0001 mm Feed speed up: 0.1 mm/min Feed range: 12000 mm/min Transversal slide:: X Max. travel: 320 mm Resolution: 0.0001 mm Feed speed up: 0.1 mm/min Feed range: 6000 mm/min Work piece spindle head: from: 8 rpm up to: 800 rpm taper in spindle: MT: 5 Tailstock: Taper in tailstock:: 4 MT Tailstock travel of barrel: 50 mm Table speed: Rapid motion: 12 / 6 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 7.5 ...

Chiron FZ15KS HIGH SPEED Vertical Machining Center Technical data: Travel x: 550mm y: 400mm z: 360mm 4th axis original direction finder CNC Siemens 840D Table working area 1050 x 450mm Tool changer 48x tool holder SK 40 Speed range up to 12000 1/min With 4th axis Renishaw tool breakage monitoring IKZ Spaenefoerderer The machine is in our warehouse, under power Mimu Machine Tools (Italy), X: 550mm, Y: 400mm, Z: 360mm, 4th axis: 360.000 pos, Renishaw: Yes

Manufacturer KEKEISEN Type UBF-D 7000 / 23 Year of construction 2013 Control iTNC 530 Heidenhain - 2 pallets, can be used individually or coupled. - Universal milling head automatically swivelling A: +/-90° / B: +/-90° - 6 axes - incl. NC rotary table 1,250 x 1,250 mm (fibro) - Operating hours: approx. 17,800 h - Current on / approx. 5,700 h program run x-travel 7,000 mm y-travel 1,200 mm z-travel 2,300 mm Speed range - main spindle 20 - 6,000 min/-1 Drive power - main spindle 30 kW Gear stages 2 Transmission stage 1 20 - 1.250 min/-1 Gearbox stage 2 1,250 - 6,000 min/-1 Tool holder SK 50 Swivel A+B: +/-90° Division 1 ° Workbench: Table clamping surface 7,000 x 840 mm Pallet 1: 2,500 x 840 mm Pallet 2: 3,300 x 840 mm table load 7,000 kg Number of T-slots 9 Tool magazine: Number of tool positions 60 ...