pos used for sale

: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...

turning diameter: 500 mm centre distance: 800 mm control: 840D SolutionLine Siemens swing diameter: 690 mm Main spindle:: Max. rpm: 3.200 min/-1 power capacity - main spindel: 28/35 kW Torque: 175/875 Nm spindle nose: DIN 55026 / A11 max. usable bar diameter: 110 mm C-Axis: 0,001 ° Subspindle:: Max. rpm: 4.000 min/-1 max. Torque: 95 / 113 Nm spindle nose: A6 max. usable bar diameter: 52 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 50 DIN69880 Number of driven toolspositions: 12 pos. axis stroke:: x-axis: 360 mm y-axis: 120 (-55/+65) mm z-axis: 980 mm C-Axis: 360 ° total power requirement: - kW weight of the machine ca.: 9,1 t dimensions of the machine ca.: 4,3 x 3,0 x 2,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 15 bar Subspindle: bar feeder interface: Turret: Tool drive mechanisum: C-axis: 2x Y-axis: hollow chuck un ...

x-travel: 1.650 mm y-travel: 810 mm z-travel: 810 mm control: TNC 426 Heidenhain Main spindle:: turning speed range - main spindle: 30 - 6.000 min/-1 power capacity - main spindel: 20,5 / 17 kW transmission ratio: 2 max. Torque: 650 Nm tool taper: SK 50 spindle bearing diameter: 90 mm distance spindle /table: 110 - 920 mm distance spindle center to column: 990 mm work height max.: 1.000 mm work table:: table surface area: 1.800 x 780 mm number of T-slots: 5 T-slot - width: 18 mm T-slot - distance: 150 mm max. table load: 1.750 kg max. workpiece sizes: 1.650 x 810 x 450 mm feeds:: feed speeds: 0 - 20.000 mm/min rapid traverse: 20 m/min Tool-Presetter:: number of toolpositions: 16 pos. max. tool weight: 12 kg max. tool diameter: 130 mm max. tool-dia with free toolbox: 220 mm max. tool length: 300 mm change-time tool to tool: max. 9 sec total power requirement: 51 kW weight of the machi ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,5 s NC-Rotary table:: table diameter: 1.100 x 900 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 40 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 69 kVA weight of the machine ca.: 16,8 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: 40 pos. Chip conveyor: test probe: Heidenhain ...

turning diameter: max. 300 mm max. workpiece length: 480 mm control: Sinumerik 840D Siemens greates pass round over bed: 430 mm Swing dia. over traverse guideway: 300 mm distance between spindles: 720 mm Main spindle:: turning speed range - main spindle: 0 - 6.300 min/-1 power capacity - main spindel: 8 / 13 kW max. Torque: 78 Nm spindle head: KK5 DIN 55026 spindle diameter in front bearing: 80 mm bar material dia.: max. 45 mm C-Axis: 0,001 ° max. chucking diameter: 160 mm Subspindle:: Spindle speed range subspindle: 0 - 6.300 min/-1 power capacity - Sub spindle: 7 / 10 kW max. Torque: 42 Nm spindle head: KK4 DIN 55026 spindle diameter in front bearing: 70 mm max. chucking diameter: 130 mm Traverses Subspindle: 510 mm axis stroke:: x-axis: 160 mm y-axis: +40 / -30 mm z-axis: 510 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 25 Drill shank diameter: 25 mm Spindle speed ...

turning diameter: 240 mm turning length: 500 mm control: Sinumerik 840 D sl Celos swing diameter: max. 510 mm Main spindle:: turning speed range - main spindle: max. 5.500 min/-1 power capacity - main spindel: 14 / 13 kW max. Torque: 192 / 172 Nm inner draw tube diameter: 66 mm C-Axis: 0,001 ° spindle diameter in front bearing: 100 mm max. chucking diameter: 215 mm spindle nose: 140H5 turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1 power capacity - driven tool-stations: 5,4 kW max. Torque: 18 Nm y-axis: +/- 40 mm axis stroke:: x-axis: 210 mm y-axis: (+/- 40) 80 mm z-axis: 525 mm feeds:: rapid traverse ( X / Y / Z ): 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ): 4,5 / 4,5 / 7,5 kN total power requirement: 20 kVA weight of the machine ca.: 4,3 t dimensions of the machine ca.: ...

x-travel: 450 mm y-travel: 600 mm z-travel: 330 mm control: iTNC 530 Heidenhain Main spindle:: turning speeds: max. 18.000 min/-1 power capacity - main spindel: 31 / 17 kW max. Torque: 98 / 54 Nm tool taper: HSK A63 swiveling-rotary-table:: rotary table dia.: 320 mm Swivel range: A: +/- 135 ° rotatable: C: 360 ° max. table load: 300 kg Number of revolutions: A: 25 / C: 40 rpm T-slots: 4x 14H7 Tool-Presetter:: number of toolpositions: 55 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8,0 kg max. total weight: 220 kg change-time chip to chip: 4,5 sec feeds:: Accelaration: 8 m/sec² Feed force: 4,5 kN rapid traverse ( X / Y / Z ): 30 m/min total power requirement: 40 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: NC-Rotary Swiveling Table: Automati ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

Rotation diameter max. 360mm Turning length max. 500mm Seiki Seicos A 10L control maximum rotation diameter 450 mm main spindle: Speed range - main spindle 30 - 4,000 min/-1 Drive power - main spindle 11 / 15 kW Spindle assembly A2-8 maximum usable bar diameter 65 mm maximum spindle diameter 255 mm Distance spindle center - plane 1.015 mm racing: x-axis 265mm z axis 530mm C axis 360 Tool turret: Number of tool positions 10 pos. Outer diameter 25mm Inner diameter 32mm Type QCT / KV 40mm Tool holder no. 40 QCT Tool magazine: Number of tool places 12 pos. Maximum tool size 50 x 80/200 mm Maximum tool weight 6.0 kg Driven tool stations: Number of motorized tool stations 5 stations. Speed range - driven tool stations 100 - 3,000 min -1 Drive power - driven tool stations 5.5 / 2.2 kW Counter spindle equipped with C axis. Excellent supply of driven tool holders.

Main spindle: Speed range - main spindle 20 - 9,000 min/-1 Drive power - main spindle 9 / 13 kW Max. Torque 57 / 82 Nm Tool holder SK 40 Swivel rotary table: table diameter 700 x 500 mm swiveling B: 105 ° (-10°/+95) ° rotatable C: 360 ° max. table load 200 kg number of T-slots 7 T-slots - distance 63 mm T-slots - width 14H7 mm centering hole 30H6 mm tool changer: Number of tool positions 16 pos. tool holder SK 40 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 80 kg feeds: feed rate max. 10,000 mm/min rapid traverse 12 m/min input resolution 0.01 mm total power requirement 17 kW Accessories Documentation Chip tray Coolant device B-axis C-axis Swivel rotary table tool changer 16 pos. electr. handwheel operating mode 4

Key data: 520 mm, 625 mm, 5000 1/min

Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...

turning diameter: 140 mm turning length: 170 mm control: Mitsubishi Meldas 635 spindle passage: 42 mm : 140 mm turning speed range - grinding spindle: 80 ~ 8.000 U/min drive capacity - spindle motor: 11 / 7,5 kW : 0,001 ° spindle bore: 55 mm A-Axis: turning speed range - spindle: 60 ~ 6.000 U/min drive capacity - spindle motor: 3,7 / 2,2 kW : 42 mm : 2 pos turret (x-stations): 12 : 2 x 12 pos : 45 ~ 4.500 min -1 Turning Speed of the Rolls: 1 kW rapid traverse X-axis: I 24 m/min rapid traverse X-axis: II 18 m/min rapid traverse X-axis: III 20 m/min rapid traverse Z-axis: 24 m/min total power requirement: 14 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,0 m - CNC control Mitsubishi Meldas 635LCC - Collet holder for main spindle - Pick-up spindle - Collet chuck holder for pick-up spindle - Pick-up spindle indexing - 2 12-position turrets with driven tool ...

Arburg 420C 1300-675 Injection molding machine Year of production - 2002 Selogica control Technical data of the closure: - Clamping force: 1500 kN -The clearance between the columns vertical: 420 mm -The clearance between the columns pos: 420 mm -Size plates of the table pos: 650 mm -Dimension of the vertical table plates: 650 mm -Mold height min: 275 mm -Plate spacing: 850 mm -Opening path: 575 mm -Ejector: 175 mm -Ejection: 40 kN Injection Specifications: -Screw diameter: 55 mm - Injection volume: 353 ccm -Injection pressure: 2080 bar - Screw rotation speed: 59 min -Worm torque: 880 N - Air injection rate: 214 g / s PS -1 hydraulic core -Hydraulic ejector Dimensions and weight: -Dimensions in: 4.82m x 1.48m x 2.18m -Total weight in: 5400KG

Demag Ergotech Extra 80-430 Year of production - 2002 Technical data of the closure Closing force: 800 kN Clearance between columns vertical: 400 mm Clearance between columns pos: 400 mm Size of table plates pos: 540 mm Dimension of the table plates vertical: 540 mm Mold height min: 250 mm The distance between the plates: 700 mm Opening distance: 450 mm ejector: 150 mm throwing: 41 kN Centering D of the movable plate: 125 mm Centering D of a fixed plate: 125 mm tool weight: 700 kg Injection technical data screw diameter: 40 mm Injection volume: 231 ccm Injection pressure: 2025 bar Screw path: 150 mm plasticization rate: 160 g / s PS Air injection rate: 33 g / s PS Mouthpiece path: 200 mm Dimensions and weight Dimensions in: 4.2m x 1.32m x 2m Total weight in: 3,900 kg

X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm Control: Siemens 840 D sl size of pallet: 500 x 400 mm table load: 500 (600) kg tool taper: HSK-A63 spindle turning speed range: 50 - 10000 U/min rapid travel x/y/z: 65/65/65 m/min no. of tools in the magazine: 80 Stück Tool diameter: 160 mm tool length - max.: 350 (400) mm spindle motor: (S6) 32,4 kW weight of the machine ca.: 12,8 t dimensions of the machine ca.: 6,2 x 3,9 x 3,95 m CNC-control SIEMENS Sinumerik 840 D sl 80-pos. ATC 2-pos. pallet changer NC-rotary table Increased spindle torque up to 259 Nm Coolant equipment with paper band filter Coolant through spindle 80 bar Swarf conveyor Max. workpiece diameter: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...

: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...

turning length: 1.000 mm swing diameter max. over bed cover: 600 mm swing diameter above cross guideway: 420 mm control: Eltropilot Heidenhain travel -x axis: 275 mm travel -z axis: 1.065 mm Main spindle:: turning speed range - main spindle: 16 - 3.200 min/-1 power capacity - main spindel: 27 kW max. Torque: 800 Nm spindle diameter in front bearing: 120 mm spindle bore: 85 mm chucking diameter: 260 mm spindle head: 220H5 turret:: number of toolpositions: 12 pos. Shank diameter: 40 mm turret change time: 0,8 sec. Tailstock:: diameter of quill: 100 mm quill stroke: 120 mm taper of center: MK 5 pressure center sleeve: max. 950 daN feeds:: rapid traverse: X: 10 / Z: 15 m/min Feed force: X: 500 / Z: 1.000 daN total power requirement: 52 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,1 m Documents: Chip conveyor: Coolantsystem: Tailstock: hydraulic sy ...

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm Control: MSC 502 distance spindle center to table: 50 - 650 mm distance Spindlenose and center of table: 100 - 610 mm Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 22 / 18,5 kW tool taper: MAS BT-40 spindle bearing diameter: 70 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiecediameter: 580 mm max. workpiece height: 650 mm b - axis: switching time: 90°: 2,5 sec change time of pallets: 6,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT-40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg change-time tool to tool: 1,5 sec change-time chip to chip: 3,7 sec feeds:: rapid traverse ( X / Y / Z ): 32 m/min feed speeds: 1 - 24.000 mm/min Tipp feed: 0 - 1.260 mm/m ...

turning diameter: 175 mm turning length: 186 mm control: Sinumerik 840 D Siemens swing diameter over slide rest: 185 mm max. bar capacity: 65 mm Spindle left Unit: spindle nose: DIN 55 026 KK6 spindle bearing diameter: 100 mm spindle bore: 73 mm bar diameter: 65 mm chucking diameter: 175 mm turning speed range - spindle: max. 4.500 U/min drive capacity - spindle motor: 12 / 15 kW max. Torque: 193 Nm Spindle right Unit: spindle nose: DIN 55 026 KK6 spindle bearing diameter: 100 mm max. chucking diameter: 175 mm turning speed range - spindle: max. 6.500 U/min drive capacity - spindle motor: 9 / 11 kW max. Torque: 140 Nm Number of Turret: 2 pos Traverse X-Axis 1: 235 Traverse Z-Axis 1: 270 Traverse X-Axis 2: 235 mm Traverse Z-Axis 2: 680 rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min feed power: X = 7.000 N feed power: Z = 7.000 N numbers of turret head positions: 2 x 12  ...

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW.  ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 20,5 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double  ...

Description: Consisting of Pos. 01 - MCD vacuum application - 2.300 mm Pos. 02 - SPC/5 UV dryer - 3.500 mm Object and workpiece data Workpiece dimensions lengths: mm 550 - 2.000 - endless widths: mm , , 10 - 100 thicknesses: mm , , 10 - 80 Round bars Ø: mm 10 - 80 Additional specifications Feed speed  , m/min , 15 - 50 (35 m/min control speed) Connection to mains , V/Hz/P 400/50/3 + earth + N Max. permissible deviation +/- 5% Operating side Stop side right, according to system layout Standard colours grey RAL 7035  , working width: 10-100 mm, hollow height: 10- 80 mm, Approx. Onsite Dimension. (l x w x h): 13,500 x 2,400 x 1,800 mm, weight approx.: 3,000 kg

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mm turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm control:Siemens/Fanuc/Fagor center height over bed:705|805|905 mm width of cross cariage:600 mm bed width:1370 mm spindle bore:200 mm spindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mm tailstock quill diameter:300 mm tailstock quill adjustment:250 mm taper in tailstock:7 MK tailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mm travel - z:= Spitzenweite mm servo motor X-axis:4 kw servo motor Z-axis:7 kw rapid power traverse in X-and Z direction:5 m/min hydraulic motor:1,4 (ab 9m: 3,6) kW coolant pump drive:15 bar weight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20 ...

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mm turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm control:Siemens/Fanuc/Fagor center height over bed:475|575|675 mm bed width:990 mm spindle bore:153/230/305/405 mm spindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mm tailstock quill diameter:165|200 mm tailstock quill adjustment:250 mm taper in tailstock:6 MK tailstock movement:über Motor travel -x axis:370 | 480 mm travel - z:= Spitzenweite mm servo motor X-axis:3 | 4 kw servo motor Z-axis:4 | 7 kw rapid power traverse in X-and Z direction:5/4 m/min hydraulic motor:2,2 (2,9 opt.) kW coolant pump drive:3 (15 opt.) | 15 bar weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/2 ...

turning diameter:1600 mm turning length:3000 mm centre height:800 mm turning diameter over bed:1600 mm turning diameter over bed slide:1400 mm turning dia. over face-slide:1200 mm speeds:5,6 -800 1/min transmission ratio:3 spindle bore:112 mm turret (x-stations):8 / VDI 60 travel -x axis:850 mm travel -z axis:3020 mm rapid power traverse in X-and Z direction:6 / 10 m/min power maindrive:46 kW weight of the machine ca.:22 to. dimensions of the machine ca.:7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories

x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

bar material dia.:51 mm turning length:644 mm turning dia. over bed:600 mm turning diameter over slide:430 mm y-axis:100 (+-50) mm turning speeds:2x 5.000 1/min positive location each:2x C-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos. driven tools:2x 12 Pos. turning speeds:2x 4.000 1/min control:FANUC 18 iTB total power requirement:30 kVA weight of the machine ca.:8 t dimensions of the machine ca.:3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

turning diameter:650 mm turning length:2000 mm face slide travel:445 mm turning diameter over slide:260 mm turning speeds:1-2.000 1/min transmission ratio:2 spindle:33 / 22 kW spindle bore:130 mm quill stroke:200 mm turret head:12 Pos. workpiece weight max.:2.560 kg total power requirement:38 kW weight of the machine ca.:6 t dimensions of the machine ca.:5 x 2,6 x 1,9 m teach in lathe, SAUTER-turret with 12 pos. (6 for live tools), VDI 40, SMW 3-jaw-chuck dia 400mm, tailstock, steady 100-250mm, C-axis, chipconveyor, free contour-programming, memory 256kB, accessories no hour meter, max. 1 shift

turning diameter:730/660 mm turning length:1.498 mm Travel turret No.1 (milling spindle) x/y/z:750 / +- 210 / 1.550 mm Swivel range Turret No. 1 (milling spindle) B-axis:+-120 ° Rapid traverse feeds turret 1 (milling head) x/y/z:50/30/50 m/min RPM milling spindle:12.000 1/min power capacity - milling spindle:18,5 / 11 kW Torque of milling spindle:120 Nm tool taper milling spindle:CAPTO C6 Tool magazine for milling spindle (turret 1):100 Pos. Spindle 1 RPM:3.000 1/min Spindle 1 Power:30 / 25 kW Torque Spindle 1:1.000 / 840 Nm C-axis spindle 1:0,001 ° Bar capacity spindle 1:90 mm Spindle 2 RPM:3000 1/min Spindle 2 power:30 / 25 kW Torque Spindle 2:1.000 / 840 Nm C-axis spindle 2:0,001 ° Bar capacity spindle 2:90 mm spindle distance:1.862 mm total power requirement:100 kVA weight of the machine ca.:26,6 t dimensions of the machine ca.:5x 2,99 x 3 m 9-axis turn-milling center with B-axis  ...

number of spindles:8 spindle passage:130 mm Cam controlled multi spindle automatic lathe, used 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo Irrtum und Zwischenverkauf vorbehalten Visiting under production condition possible Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Lifting device control MRC 2 220 - 240 VAC 50 Hz 3000 VA Lifting device control comes from operating resolution . Spare parts, filters, powder guns, wear parts in stock. Tel. 05242 / 43186 email info@pradler.com Filter cell Gema ITW 592 x 592 x 292 mm from operating resolution in stock Filter cartridge D = 327 x 605 mm for Wagner etc. in stock TS Residual filter D = 115 mm x 605 mm please enquiries / many pos. at the camp Mfg. Pradler Machine Service Tel. 05242 / 43186

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Control: Z/32 Tip height: 500 mm top width: 3000 mm turning diameter: 1000 mm Dre Ø over carriage: 620 mm spindle nose: CL 11 motor spindle: 37 kW revolver 12 POS. (C axis) Chip conveyor speed: 1500 rpm Spindle bore: 105 mm weight: approx. 8500 kg

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

POS 1 Dry pigment titanium white rutile R660 Sachtleben stored dry in 25 kg bags. Ideal for artist colours and paint for transport cost reasons, if possible min 100 kg Small delivery quantities may be after consultation Total quantity available: 625 Kg Pucsvm Other dry pigments: Zinc White / 625 Kg Zinc White by ZnO EPM Manufacturer:Umicore Nederland B.V. Ocre jauen 2022 ( yellow ochre N°2022 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombe naturelle 1066 ( Umbra natur N°1066 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombre naturelle 1380 ( Umbra natural dark N°1380 ) 500 Kg Manufacturer Le Moulin - Couleurs France Umbra calcine 4 x 25 Kg = 100 KG Umbre calcine E 1102 Manufacturer Le Moulin - Couleurs France Chalk Chalk / North White United Chalk Works Dammann KG

Station wagon by Blanco, model: TTW 2 X 10 HS. Tray Thermotransportwagen. BRAND NEW. not needed. For 20 Thermo trays, made of stainless steel, blue handles. Order No. / POS. 4500397805/25 SER. No.: S782078SN 2613465/8FD 0701. the mismatch? sign up. We have many other gastro machines! Greetings

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Machine details Bearing number 1105-03062 Machine type Machining center - Horizontal Make MAZAK Type FH 680 Built in 1997 Control type CNC Warehouse FRANCE Country of origin Japan Delivery time immediately Freight base from location Technical details x-way 1050 mm y-path 800 mm z-way 880 mm Control MAZATROL M plus Pallet changer type 2-fold Pallet size 630 x 630 mm Tool changedevice 40 Tool holder bt 40 Table load 1 t Pallet change time 6 sec Rapid response 40 m/min Feed 1-40,000 mm/min Speed 35-7000 rpm Drive power 30 kW Workpiece dimensions max. 1000X 1000 mm Tool diameter 135/260 mm Tool length - max. 500 mm Tool weight max. 7 kg Total power requirement 45 kVA Machine weight approx. 15 t Space requirement approx. 19 m2 Information High-pressure cooling by spindle 20 bar MAZATROL m plus Synchronous thread cutting NC Round table 0.001° x 360,000 p ...

x-path 500 mm y-path 420 mm Gxtw9id z-way 380 mm Table clamping surface of 500 x 380 mm Spindle holder SK 40 Spindle holder DIN 69871 A Spindle speeds - infinitely variable 20 - 18,000 rpm Bbdkewwc Feeds x/y/z - infinitely variable 20 - 20,000 mm/min Rapid response 50 m/min Table rotation 360° Table speed range max. 33 rpm Swivel range 180° Swivel speed 26 rpm Tool changer 60 Pos. Tool length - max. 280 mm Tool weight max. 6 kg internal coolant supply Control HEIDENHAIN, TNC 430 Total power requirement 50 kVA Machine weight approx. 5 t Dimensions of the machine L x W x H 3.6 x 2.70 x 2.43 m

Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min

Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos

We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very good condition. Serious buyers contact us.