We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,569 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Position Sensor ZWICKER-SENSORS BERLIN 2H 0515 P ( 2H0515P ) 10 - 60 V DC max. 400 mA Thread: M12 x 1.0, length: 45 mm approx. 1.9 m connection cable New ! Dimensions ( sensor without cable ): Ø 12 x 60 mm Dimensions ( packaging ): 150 x 150 x 20 mm
used
Digital position indicator, 2 - axis OPTIMA - ELECTRONIC MS 200 XT Type: MS 210 XT Power consumption: 25 W Operating voltage: 220 V 1AC ±20% Frequency: 40 - 60 Hz As good as new ! Dimensions: 320 x 195 x 130 mm
used
Hydraulic position switch MZGA ( ) 102T 1 EM 574 A Pn: 200 kgF/cm² ( approx. 196 bar ) Qmax: 40 l/min nominal diameter: 10 mm used, tested ! Dimensions: 140 x 70 x 90 mm
used
Shackle with eye bolt PAGUS 3 times 1 1/2 inches and 2 times 1 1/4 inches load capacity: 17 t and 12 t bolts: Ø 45 mm and Ø 36 mm weight: 7.5 kg and 3.8 kg used, tested ! Dimensions: 400 x 300 x 300 mm
used
Positioning gear, rotary actuator, actuator WMW 5.4 : 1 Gear ratio: 5.4 crank turns = 1 turn of the large gear Positioning disc for crank with 20 snap holes large gear: Ø 64 mm, 30 teeth Small gear: Ø 46 mm, 21 teeth tooth width: 20 mm tooth spacing: 7 mm necessary fastening groove with a width of 128 / 27 mm used, tested ! Dimensions: 440 x 240 x 265 mm
used
Valve actuator, rotary actuator, pneumatic valve actuator, with position switch ARIS ACTUATORS AND CONTROLS WPE 2-4-A Driver: 17 x 17 mm Positioner: CROUZET Type 83 850 501 Switching capacity: 380 V AC, 10 ( 4 ) A Control valve: FESTO MFH-3-1/4-SA 26615 Operating pressure: 2.2 - 10 bar Control voltage: 220 V AC 50 Hz used, tested ! Dimensions: 295 x 125 x 135 mm
used
Rotary actuator, valve actuator, pneumatic valve actuator with position indicator END FITTINGS EE620632 ZA65-EE63 PA/14557 Control pressure: 6 - 8 bar Operating pressure: 16 bar used, tested ! Dimensions: 200 x 90 x 200 mm
used
Rotary actuator, valve actuator, pneumatic valve actuator with position indicator END FITTINGS EE620552 ZA25-ED55 PA/15520 Control pressure: 6 - 8 bar Operating pressure: 16 bar used, tested ! Dimensions: 170 x 110 x 190 mm
used
Swivel actuator, valve actuator, pneumatic valve actuator with position indicator and solenoid valve END-ARMATUREN EE620632 ZA65-EE63 PA/14557 Control pressure: 6 - 8 bar Operating pressure: 16 bar Solenoid valve: 1314-01 230 V AC used, tested ! Dimensions: 200 x 110 x 200 mm
used
Safety posts, fall protection COMBISAFE 1200 mm Box profile: 35 x 35 mm 6 pieces with 2 hooks in 500 and 1040 mm heights 1 corner piece with 2 additional hooks used, tested ! Dimensions (shipping): 1200 x 500 x 500 mm
used
Post Brass tubes, round grooved, square and hexagonal PAGUS tubes Ø approx. 3 to 20 mm round grooved Ø approx. 8 up to 18 mm square and hexagonal MS58 and MS63 length up to approx. 1000 mm approx. 74 kg Dimensions: 1100 x 300 x 200 mm
used
Post-charging system with control unit PAGUS Boiler capacity: approx. 150 l Stainless steel boiler Connection diameter (inside): Ø 47 mm Flange diameter: Ø 150 mm Control Panel: ELREST VISIO P303/CS7CAN item number: 246613501B without SICK distance sensor ! Artikek EL4521 https://shop.pagus.eu/advanced_search_result.php?keywords=el4521 used, checked ! Dimensions: 1200 x 800 x 1400 mm
used
Barrier set PAGUS 4 x hinged post with base, filled height erected: 870 mm foot: 280 x 280 mm 4 Chain eyelets per post 5 x 10 m Plastic chain diameter: 6 mm color change every 560 mm 10 x connecting eyelet diameter: 6 mm New ! Dimensions (packed): 500 x 330 x 1000 mm
used
Electropneumatic positioner, with HART® communication SAMSON Type 3730-3 3730-31000000400000014.01 Valve strokes: 3.6 - 300 mm Swivel angle: 24 - 100° ( degrees ) setpoint: 4 - 20 mA New, with documents ! Dimensions ( Positioner ): 195 x 86 x 105 mm Dimensions ( Packaging ): 235 x 110 x 155 mm
used
Electropneumatic positioner, with HART® communication SAMSON Type 3730-3 3730-31000000400000000.01 Valve strokes: 3.6 - 300 mm Swivel angle: 24 - 100° ( degrees ) Supply air: max. 7 bar Input: 4 - 20 mA DC Output: 4 - 20 mA DC New, with documents ! Dimensions ( Positioner ): 195 x 86 x 105 mm Dimensions ( packaging ): 235 x 110 x 155 mm
used
Position feet, 20 pieces PAGUS form A M8 pitch: 1.25 thread length: 10 mm foot area: Ø 15 mm height: 10 mm width across flats: 17 mm Other quantities on request ! New ! Dimensions ( single position foot ): 20 x 17 x 20 mm Dimensions ( packaging ): 140 x 100 x 20 mm
used
Positioner Assembly, Fuser Assembly PAGUS Positioning pneumatic approx. 100 mm BOSCH 0 821 405 131 ( 0821405131 ) stroke electric approx. 140 mm < br /> STAR 1460-205-00 SIEMENS 1 FT5046-1AF71-3AB0 345 V Stainless steel carrier plate ! used, tested ! Dimensions: 710 x 460 x 186 mm
used
Post Power Tools, High Frequency Tools, High Frequency Machines FINE 300 Hz 8 x Drill 2 x Jigsaw 1 x Angle Grinder (small) 1 x Rod Grinder Total 12 handheld tools. 220 V 300 Hz used, checked! unchecked! position can also be halved. Dimensions: 600 x 400 x 420 mm
used
Ref. -No.: 10197 Manufacturer: N/A Storage location: Halberstadt
used
Ref. -No.: 10198 Manufacturer: N/A Storage location: Halberstadt Further information: autom. welding station with positioner
used
Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544
used
Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997
used
Position scanners, lasers, barcode scanners -Voltage: 230 VAC 50 Hz 110 mA -Sec: 10 V 1000 mA 10 VA -Laser class: 2 -Weight: 2 kg
used
Position computers, position scanners -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg
used
Position computers, position scanners -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg
used
Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: TP1-4131A024M -Number: 2x available -Price: per piece -Weight: 0.5 kg
used
Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE65 -Number: 15x available -Price: per piece -Weight: 0.2 kg
used
Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE01 -Number: 11x available -Price: per piece -Weight: 0.3 kg
used
Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE61 -Number: 5x available -Price: per piece -Weight: 0.3 kg
used
Displacement pump, pressure pump, water pump -Drive: 2.5 kW -Speed: 1425 rpm -Pipe connections: DN 50 -Dimensions: 860/330/H410 mm -Weight: 90 kg
used
PLC control, central assembly, RAM, CPU, central device, positioning assembly -Manufacturer: pilz, positioning assembly 6 axes -Type: P10-MMC6 304518 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc.
used
PLC control, central module, main memory, CPU, central device, positioning module -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Number: 1x module available -Price per piece -Dimensions: 100/45/H135 mm -Weight: 0.3 kg/pc.
used
Limit switches, buttons, safety switches, position switches, safety switches, safety limit switches -Manufacturer: Schmersal, position switch unused in original packaging -Type: MD 441-11y-M20 -Number: 2x switches available -Price per piece -Dimension box: 160/105 / H115 mm -Weight: 1.8kg / piece
used
Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg
used
Fork positioner with separate sideshift, hydraulic fork adjustment, sideshift, side lift, forklift blade, tine carrier -Manufacturer: SE Fahrzeugwerke, type 1/9953 -Load capacity: 860 kg -Tine length: 1000 mm -Tine width: 595 mm to 1800 mm -Dimensions: 1240/915/H610 mm -Weight: 272 kg
used
Electromechanical actuator for valves, valve drive, actuator, servomotor, position transmitter -Manufacturer Joventa, positioner Ovp -Type: PF 40-99 -Operating voltage: 15 VDC -Price: per piece -Number: 2 piece -Dimension box: 50/55/55 mm -Weight 0.1 kg/piece
used
Inductive sensor, electronic sensor, position encoder, displacement sensor -Manufacturer: MTS Temposonics, position encoder -Type: TTM-RB-M-1000-R -Measuring length: 1000 mm -Dimensions: 1200/53/H46 mm -Weight: 0.8 kg
used
Electromechanical actuator for valves, valve drive, actuator, servomotor, position transmitter -Manufacturer Belimo, position transmitter -Type: SGF24 -Price: per piece -Number: 6 piece -Dimension box: 50/55/55 mm -Weight 0.1 kg/piece
used
PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg
used
Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus tensioning station -both sides: ground -Clamping rings: with ground short taper for a positive connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Number: 25x available -Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg
used
PLC control, slave CPU positioning, positioning module, position processor -Manufacturer: SCHLEICHER, positioning assembly 2 axes -Type: USP 21 31506913 -Quantity: 2x module available -Price per piece -Dimensions: 150/35/H200 mm -Weight: 0.6 kg/pc.
used
3-axis positioner with tool feed PAGUS 150 / 160 mm travel x: 150 mm travel y: 150 mm travel z: 160 mm manual adjustment by crank wheels ! tool carriage: 100 x 65 mm feed tool carriage: max. 60 mm adjustment by pneumatic cylinder ! base plate: 280 x 153 mm used, tested ! Dimensions: 470 x 460 x 560 mm
used
The stripping unit model 99913 is a modern system developed by Kuzlitmash. The combination of reliability, strength, and precision makes the 99913 ideal for grinding parts. The processing technology on the 99913 has been tested by operation for many years in the most difficult conditions for cleaning the outer surfaces of iron, steel, and titanium castings.
used
Distance Rope Position Sensor, Position Sensor, Cable Pull Displacement Sensor ASM posiwire® WS12 WS12-3000-ADSI-L10-SB0-D8-SAB2 sensitivity: 1.3653 digits/ mm gauge length: 3000 mm with documents !with documents ! used, repaired ! Dimensions (sensor): 140 x 110 x 170 mm Dimensions (packaging): 250 x 250 x 200 mm
used
Reference Num.: 3991 Brand: M?ller Martini Type: 1509 Available: directly Status: Not in production Location: Europa Equipment: - Schuppenanleger - 2 Doppelanleger typ 1516 - Dreischneider 217 - 2 normalheftkopfe typ 881
used
Year: 2011 - technically efficient, ready to work - after full service - for shaped/arched posts
used
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
used
For Wood, Plastic, Kitchens, Windows, Doors, Loading Furniture, construction, etc VAT not deductible.
used
Position switches, safety position switches, with roller lever SIEMENS 3SE3 120-1G-Z ( 3SE3120-1G-Z ) one NO / one NC max. 500 V max. 10 A spare part for machining center HELLER BEA 05 DC used, tested ! dimensions ( single switch ): 160 x 40 x 60 mm
used
Bode welding derrick for internal amp; external submerged arc welding - for welding tanks - welding length: 3500 mm - Esab LAE 800 amp welding unit for external arc welding - Esab LAE 800 amp welding unit for internal arc welding - max height of workpiece: 6200 mm - heightadjustment is in increments of 250 mm - hydraulic clamping of workpiece - movable welding rotator 40 ton - electric movement gt; wheeldia 480 mm x 200 mm wide gt; rubber wheels MANIPULATOR: welding derrick