portioning used for sale

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)

used tested briquetting press New components in the electrical box V400/50 Diameter briquette 50 mm Capacity approx. 50 kg/h

Te Koop: Fischer & Porter flowmeter DN 25 ABB COPA-XE d DE 47 Tatalum

Te Koop: Fischer & Porter flowmeter DN 25 ABB TRIOWIRL VT41

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

Manufacturer:Porta Model: TRO-06-N08 Year of Manufacture: 2012 Machine Type: Production Cell with CNC Rotary Transfer Machine Control: Porta Additional Components: - Filter System (Knoll VRF450, 2011) - Chain Conveyor (Knoll) - External Cooling Unit - Mist Extraction System - Workpiece Conveyor - Handling: 3x 6-Axis Robots (ABB) - Cleaning System (Mako) with Filter System - Small Pallet Turner (Mako) Find more here - / Contact us at -

Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine.

POREBA TCF 160 is a heavy-duty CNC horizontal lathe (turning machine) manufactured by POREBA Machine Tools, a Polish industrial machine tool builder. It’s part of the TCF series, which includes several sizes designed for machining very large, heavy workpieces such as shafts, rolls, and other long cylindrical components. Turning large shafts and heavy cylindrical parts, like those used in shipbuilding, power generation, mining, and heavy machinery. When equipped with optional tooling, it can also perform drilling and milling operations in addition to turning. Rigid construction with hardened guideways and heavy cast components for stability. Milling attachment 5,5 kW with Sk-40 taper Central lubrication Motorized tailstock 4 Chuck 1300 mm   CNC control SIEMENS 840D with following softeare options: MMC Easy Mask Spline interpolation Look Ahead Contour re-alignment  ...

Te Coop: Fischer & Porter flowmeter DN25 Model D10 DK 1425 A De prijs is incl. 21% BTW

Manufacturer: Meinert Portalbeschickung, Year: ca.1990, Control: Schützsteuerung, Work piece width min-max mm: 150-1200, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Longitudinal feeding: ca.3500, Stacking pattern, single-row: yes, Number of stacks: 1, Stack height in mm: ca.1200, Cycles approx.: 6, Number of sucking lines: 2, Removal of protective boards: no, Feeding speed continous adjustable: yes, Erection in a pit: für Bühne yes, Hydraulic lifting table kg: 2000, Drain roller operation: Auslaufband, Year :ca.1990

Key data: 2500 mm, 8000 mm

Poreba TZB-250 CNC Heavy Duty Modular Lathe Fanuc Oi-TF CNC Control with MPG Pendant (Retrofit 2015), 78.74” 4-Jaw Face Plate Type Chuck, 98.42” Swing Over Bed, 314.96” Maximum Turning Length, 125.98” Maximum Swing Over Gap, Spindle Speeds 0.5-1000 RPM, 4.13” Spindle Bore, 4-Way Tool Post, 35,275 Lbs. Approx. Weight Capacity (Unsupported), Power Tailstock, Open Steady Rest, 75 HP Spindle Motor, S/N 1132 070

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36 / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

Propellers size from 38 Inches up to 80 inches CU1 and CU4

turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 430 mm centre height: 450 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spreader device, door spreader, door mounting -Quantity: 8x per suitcase -Quantity: 2x spreader device included in case Price: per piece -Weight: 15 kg/piece

turning diameter over bed:930 mm turning diameter over slide rest:630 mm turning length:6000 mm turning dia. in gap:1250 mm spindle bore:95 mm turning speed range:8 - 800 U/min total power requirement:25 kW dimensions of the machine ca.:9 x 2 x 1,9 m faceplate 2 steadies coolant attachment taper turning attachment

turning diameter: 1100 mm turning length: 6000 mm control: Siemens 840D turning diameter over slide: 740 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Die Maschine ist Überholt und hat eine neue Steuerung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 8000 mm speed: 800 U/min spindle passage: 105 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Swing steady 1 is 150 mm  - Swing steady 2 is 350 mm - Swing steady 3 is 500 mm - 3 units suitbale for TPK 90 (or with spacers TPK 110) - Spacers are not included - 2e Tool post to be mounted on slide 

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 6000 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointmen ...

Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

faceplate diameter: 2000 mm turning diameter: 2500 mm turning speeds: 0,5-100 U/min max. workpiece weight -without tailstock: 6000 kg max. workpiece weight between centres: 25000 kg Plate area: mm turning diameter in the pit: 3200 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Te ...

turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space,  ...

turning diameter over bed: 1350 mm turning diameter over slide rest: 1020 mm centre distance: 6000 mm turning speeds: 5-500(x24) U/min spindle passage: 120 mm turning dia. in gap: 1700 mm total power requirement: 27/41 kW weight of the machine ca.: t dimensions of the machine ca.: m Power compound 4-jaw chuck, Ø 1.000 mm Steady rest, Ø 500 mm Work rest Rapid tool post Coolant system Rapid traverse 2-Axis Trak D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 6000 mm turning dia. in gap: 1250 mm spindle diameter: 95 mm speed: 8-800 (x24) U/min total power requirement: 22 kW weight of the machine ca.: 1100 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 3500 mm turning dia. in gap: 1100 mm spindle diameter: 95 mm speed: 6 - 630 (18x) U/min chuck diameter: 3-jaw 400 mm chuck diameter: 4-jaw 700 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Power compound 4 way toolpost Steady rest Ø 400 mm 3 Axis D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Mark ...

- Work load supported 2 steady 25.000 Kg - Work load not supported 16000 Kg - incl. 4 Chuck 1600 mm - incl. 2 x Steady rest - incl. internal grinding attachment - incl. external grinding attachment - incl. milling saddle support

Pore finder, pore finder, surface tester -portable high-voltage pore detector -Pore locator is an ideal device for detecting pores and imperfections -in dielectric (electrically insulating) coatings -such as paints, enamels, plastic layers on all metals and concrete. -Dimensions: 390/220/H260 mm -Weight: 7 kg

Pore finder, pore finder, surface tester -portable high-voltage pore detector -to locate: pores, cracks and other imperfections -Dimensions: 365/220/H260 mm -Weight: 7.5 kg

TREIF Falcon Hybrid Portion Cutter – 2012, For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system., The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery., The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision., Key Features, - Year: 2012, - Complete system including infeed weigher and checkweigher with automatic reject, - Recently serviced, - Excellent working condition, - Immediately available, Typical Specifications, - Maximum cutting capacity: up to 550 cuts per minute, - Maximum product cross section: approx. 26 ...

portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 -in: 2x aluminum cases -various hoses -Transport weight: 100 kg

The Marel TVM Portio 4000 is an industrial-grade portioning machine designed for the high-speed, precise cutting of meat products. Manufactured by Marel (specifically under their TVM line in the early 2000s), it is primarily used in commercial food processing to create uniform portions of fresh, cooked, or crust-frozen meat. Find more here - / Contact us at -

Capacity: up to 1800 pc/h Main motor power: 1 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 120 Lenght: 80 Height: 175 Delivery time: after the advanced payment machine is ready for delivery

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power - used power in work: about 60-65% : 11

Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute, Benhil 8358 Twin Filling Butter Portion Packer, Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight., Fully Refurbished 12 months ago spent over € 200.000, Key Features:, - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations., - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs., - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps ...

Key data: 4700 mm, 6100 mm, 1470 mm

Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...

Without roller belts Portal width 3700, portal length 8800, portal height 3400 Surface Vacuum Cleaner 2010x1100 Hub 2000 Infeed conveyor 3260x12100 Auction-ID: A1-45406-12