portal milling used for sale

Key data: 1600 mm, 710 mm, 700 mm

HEIDENHAIN TNC 124 Travel X-axis Travel X-axis 1600 mm Travel Y-axis Travel Y-axis 710 mm Travel Z-axis Travel Z-axis 700 mm Height table to vertical spindle 50 – 750 mm Height table to horizontal spindle 60 – 760 mm Working table Working table 2200 x 550 mm Table load 3000 kg Drive power AC milling motor Main motor power AC 11 kw Tool taper ISO 50 Spindle speeds stepless 40 – 1600 rpm Feeds x,y feeds x;Y 2000 mm/min Rapid feed x,y, 5000 mm/min Feed Z Feed Z 1000 mm/min Rapid traverse Z Rapid feed Z 2500 mm/min Machine weight approx. Machine weight approx. 8000 kg Equipment Electronic handwheel / elctronical hand-wheel HEIDENHAIN Table enclosure Hydraulic tool clamping Universal milling head Coolant system Bodenwanne / floor-pan Documentation Additional /additional Completely new replacement gearbox from spare parts stock Completely new gea ...

Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl

Tool milling machine DECKEL FP1 with 3 axis active digital display TNC 113 from educational institution -Travel X/Y/Z 300x160x340mm -Speed range 40-2000 rpm -Feed infinitely variable in three axes Hobkn Asv Abp Tju S Tjl -Rapid traverse in all three axes -Vertical milling head - 100mm movable -Vertical - Horizontal milling device -Drive power 1.5/1.9KW -Rigid angle table -3 axis digital display Heidenhain TNC113 -Coolant device -Work light -Documentation Dimensions: LxWxH 1.3x1.2x1.6 meters / Weight 850Kg

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested

Key data: 300 mm, 150 mm, 250 mm

Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...

Tool Milling Machine Cover FP3 SN 3641 Year ±1977 Travel X/Y/Z: 500/300/395 mm Spindle speed: 40–2000 rpm Spindle motor: 3 kW, 220/380 V, 50 Hz with brake Feed and rapid traverse in X-Y-Z Angle table Vertical milling head with quill ISO 40 S20x2 Horizontal quill Iso 40 S20x2 Weight approx. 1200 kg 3-axis digital display Heidenhein Cooling system Some tool holders S20x2 Collets Machines are tested and serviced Can be viewed under power 3 months warranty from stock

This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details.

DOOSAN VM 960L CNC machining center was built in 2016 in South Korea by Doosan Machine Tools. The machine on offer is an excellent choice for both roughing and finishing machining of workpieces with a maximum weight of 4500 kg. It is distinguished by a number of state-of-the-art technical solutions, which, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. All machining processes, i.e. drilling, threading and milling, are performed by means of a reliable spindle and cutting tools taken from a 40-position magazine. The very accurately balanced spindle ensures vibration-free operation at all speeds. Its taper is cleaned continuously with compressed air to protect it from chips and coolant. The entire workspace, in turn, has been fully maximised to ensure freedom of operation. The offer also includes a ...

A CNC vertical milling machine Deckel Maho (DMG Mori) is available. Travel path X/Y/Z: 350mm/250mm/340mm, B-axis: 90°, C-axis: 360°, speed: 5000rpm, table dimensions X/Y: approx. 400mm/280mm, max. workpiece weight: 100kg, tool holder: SK40, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1600kg, control: Siemens. Documentation available. An on-site inspection is possible.

EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...

Key data: 800 mm, 360 mm, 450 mm

Milling machine for horizontal and vertical use, speed range 22.4-1,000 rpm in 12 gear stages Rapid traverses for longitudinal, Qer, and vertical, drive power 5.5 KW Dimensions 2000 x 2650 x 1775 Weight 2500 kg Accessories: Various tools by arrangement, including green side cabinet

Weight: 1,5 t serial number: 4193 : ja vice: ja x-travel: 500 mm length: 1200 mm width: 1300 mm height: 1789 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 mm, 700 mm, 500 mm

Inv. Num. : 8976 Type: C 400 U Producer: Hermle Created: 2015 Parameters: Control system: Heidenhain iTNC 530 Number of stacking positions: 38 Number of axles: 5 pieces X-axis travel: 850 mm Y-axis travel: 700 mm Travel Z axis: 500 mm Cone: SK40 Electric spindle speed: 18000 1/min Spindle cooling: 40 bar Rotary table Ø 650 mm A 91° / -139° C 360° BLUM Tool Measuring System BLUM workpiece probes Direct torque drives in rotary axes Chip conveyor Oil mist extraction Electronic handwheel

Key data: 450 mm, 600 mm, 330 mm

Catalog No. : 8975 Type: C 22 U Producer: Hermle Made in: 2018 Characteristic: Control system: Heidenhain TNC 640 Total hours: 23,000 h Number of stack positions: 192 Number of axis: 5 pcs X-Axis travels: 450 mm Y-Axis travels: 600 mm Z-Axis travels: 330 mm Block speed: 18000 1/min Taper: HSK-A63 Internal cooling: 80 bar Rotary table Ø 320 mm A ±135° / C 360° Hermle IH30/60 handling system (active) BLUM tool measuring system (LC50) BLUM workpiece probe (TC52) Dynamic Precision

Key data: 700 mm, 250 mm, 350 mm

Beautiful Rambaudi V2 XYZ= 700x250x350 The stroke of the upper ram is 400 mm Table dimensions 1070x300mm Quill with R8 cone Feeds and rapids on X Rapids on Z Feed up/down on the quill Spindle speed 65 to 4750 Head can turn Automatic Bird Lubricator DRO on 3 axes Some tools

Key data: 500 mm, 400 mm, 330 mm

Condition: in working order Availability: immediately Location: Thuringia/Arnstadt Loading: by buyer Forklift: will be provided Technical specifications without guarantee

CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T

Manufacturer: Deckel Maho Model: DMU 50 eVo Linear Year of Manufacture: 2007 Machine Type : Milling Machine Installed power: 44 kVA Supply voltage: 400V / 50Hz Machine hours (power on): 24,610 h Spindle hours: 9,820 h Find more here - / Contact us at -

A CNC spindle machine Klaaßen is available. Main motor power: 12kW, tool interface: HSK-63, speed: 6000rpm, max. machining dimensions X/Y/Z: 1800mm/1800mm/445mm, feed rate: 15m/min, indexing angle: 4x90°, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/500mm, Speed: 8000rpm, Tool holder: SK40, Feed rate: 10m/min, Rapid traverse: 20m/min, Table dimensions X/Y: 1000mm/600mm, max. table load: 500kg. Machine dimensions X/Y/Z: approx. 3560mm/2700mm/2250mm, Weight: approx. 6500kg, Operating hours: approx. 66000h, Spindle hours: approx. 18000h. Including approx. 30 SK40 holders and 2x Allmatic hydraulic vices. Documentation available. An inspection on site is possible. Without IKZ and tool changer.

- CNC wireless remote control - Zero-3 / 5-channel stepper motor drive - Base frame (movable on wheels) - Dell PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (Version 2.50) - Accessories

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

DMG MORI DMC 635 V Ecoline CNC machining center was built in 2014 in Poland by FAMOT Pleszew Sp. z o.o. The machine, designed for precision machining of workpieces, is the perfect solution for both unit and series production. The machining process is performed fully automatically by means of a reliable electro-spindle and tools taken from a 20-position magazine. Process stability, in turn, is ensured by an extremely rigid bed, which continuously eliminates any vibration and oscillation. All this is complemented by an easy-to-use HEIDENHAIN CNC control with many useful functions. The DMG MORI DMC 635V Ecoline CNC vertical machining center weighs 3900 kg. Technical specifications of the DMG MORI DMC 635 V Ecoline CNC milling machine - HEIDENHAIN TNC 620 CNC control with workpiece and machining 3D simulation - feed in the X/Y/Z axis: 635/510/460 mm - rapid traverse in the X,Y,Z axis:  ...

Condition: in working order Availability: immediately Location: Thuringia / Arnstadt approx. table 600 x 400 mm approx. travel distances X / Y / Z: approx. 400 / 320 / 410 mm approx. spindle holder SK 40 Approx. spindle speeds 45 - 2240 rpm approx. drive power 4.9,kw approx. weight 2000 kg

MORI SEIKI NV5000 alpha 1B/40 CNC machining center was built in 2007 in Japan by Mori Seiki Co., LTD. The machine is designed for precision machining of heavy workpieces weighing up to 1200 kg. The machining process is performed fully automatically by means of a reliable spindle and tools taken from a 30-position magazine. High power and rotational speed of the spindle enable performing efficient roughing as well as finishing operations. The workspace, on the other hand, has been fully maximised to ensure the freedom of the performed operations. All this is complemented by an advanced FANUC CNC control with MAPPS interactive programming. The NV5000 alpha 1B/40 CNC vertical machining center is offered with an extensive range of equipment, consisting of, among others, cooling through the spindle, chip conveyor and high-pressure pump. The total weight of the machine is 7300 kg. Technical ...

Manufacturer: Röders Model:RFM760 Machine Type: Milling Machine Year of Manufacture: 2000 Control Software: RMS6V3.15 (211) X / Y / Z Travel: 760 x 550 x 300 mm Table Size: 860 x 550 mm Spindle: Fischer MFW-1230/42 - 42,000 RPM (new December 2022) Spindle Taper: HSK E40 Tool Changer: 25-position with laser length and diameter measurement 3D Probing: IR 3D touch probe for workpiece measurement Dust Extraction: Yes (graphite) Cooling: Coolant unit and spray cooling for tool and workpiece Tool Shrink Fit Unit: Röders shrink fit unit included Machine Weight: 6,500 kg Find more here - / Contact us at -

Manufacturer: Kunzmann Model: WF650 Machine Type: Universal Milling Machine Year of Manufacture: 2013 CNC Control: Heidenhain iTNC 530 X / Y / Z Travel: 650 x 500 x 450 mm Table Size: 1100 x 600 mm Spindle Speed: 1 to 6,500 RPM (steplessly variable) Spindle Power: 9.0 kW at 100% ED / 13.0 kW at 40% ED Tool Changer: 20-position automatic Tool Measurement: Heidenhain TT 449 automatic tool measurement 3D Touch Probe: Heidenhain infrared 3D probe for workpiece measurement Feed Rate: X/Y 25 m/min, Z 20 m/min Power Supply: 400 V / 50 Hz Machine Weight: approx. 5,700 kg Condition: Excellent - top maintained Find more here - / Contact us at -

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company

x-travel: 12000 mm y-travel: 2000 mm z-travel: 1000 mm control: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mm spindle speeds: 0 - 1500 mm total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m Mist extraction Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2200 mm, 600 mm, 600 mm

Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

GeneralUniversal Milling Machine; Control: CELOS X with Siemens 840D SL Operate Technical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minClamping SystemHSK-A 63 Rapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgWorking area 1Longitudinal650 mmCross520 mmVertical475 mmDirect measuring systemDirect path measuring systemBenefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe)Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp  ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

BMEI BV100 CNC vertical machining center was built in 2007 in China by BMEI CO., LTD. The machine is used for precision machining of workpieces with a maximum weight of 700 kg. The machining process is performed inside a large workspace, which has been fully maximised to ensure the freedom of performed operations. Inside it, there is a stable work table with a length of 1300 mm and a width of 610 mm and with five T-slots for quick and easy attachment of tooling. The spindle, driven by a high-powered motor, reaches a speed of as much as 15000 rpm and moves in three X,Y,Z axes with feeds of 1050 mm, 510 mm and 560 mm respectively. The capacious 21-position tool magazine, on the other hand, allows storage of a large number of tools with a maximum diameter of 160 mm. A short tool change time of just six seconds reduces machine downtime to a minimum. All this is complemented by an advanced FA ...

CORMAK MILL850 CNC machining center was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. The CORMAK MILL850 1000 x 500 is the perfect choice for precision machining of workpieces with a maximum weight of 500 kg. The machine is distinguished by the use of many well-proven components that guarantee reliability and long-term performance. The machining process is performed inside a large, fully illuminated workspace. This space has been fully maximised to ensure the freedom of the performed operations. The hermetic enclosure of the workspace prevents possible dangers, as well as keeping the work area clean. The hardened work table with a length of 1000 mm and a width of 500 mm enables secure fixing of workpieces without overloading the design. The spindle, driven by a high-powered motor, reaches speeds of up to 12000 rpm. A ...

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...