portal milling used for sale

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

CNC Universal milling machine make MAHO type MH 400 PFabr. -No: 41837 Year 1983vertical clamping surface: 800 x 200 mmWorking area along X: 400 mmWorking area vertical Y: 375 mmWorking area transverse Z: 250 mmTool holder: ISO 40Tool clamping: automaticQuill stroke vertical: 50 mmstepless speed adjustmenthorizontal and vertical: 40-3150 rpm.Feed range X and Y: 5 - 750 mm / minFeed range Z: 5 - 500 mm / minRapid traverse X and Y: 1.2 m / minRapid traverse Z: 0.8 m / minMain drive: 2.2 kWOutside dimensions approx: 1000 x 1300 x 1750 mmWeight approx: 850 kgWith- Point and distance control HEIDENHAIN TNC 135- rigid angle table- Horizontal milling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always  ...

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40

Kunzmann WF 7 CNC Heidenhain TNC 355 Machine no. 370006 Working range X/Y/Z 600/400/400mm Drive power 6,5kW Hydraulic tool clamping , Tool holder SK40 Speeds 1-4000 rpm infinitely variable Feed speed 0-2000 mm/min Rapid velocity 4000 mm/min Pinole extendable 60mm with electronic handwheel Automatic tool changer 8-fold Coolant device freestanding Automatic central lubrication Weight 2000kg Tool changer must be adjusted, transfer to pinole hooked incl. complete documentation

LINEAR MILLING MACHINE PADE UNIZE 6 number of aggregates 6 2 milling 2 x 7.5 kw engines 2 universal: milling or grinding 6.6/8 kw two-speed engines 2 grinding 3.7 kw engines included tool

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type PENTHO 2 Moulding unit 545x50 mm Max. moulding tool 350 mm engine power 7,5 kW 400V Table dimensions 500х1030 mm Automatic feed 4/16 m/min. Made in Belgium 2007 m./y./g. Transport dimensions 2700x2200x2100mm Weight 1500 kg

Univ. Milling machine make RECKERMANN type Kombi 1000Year of construction 1974Transverse movement of the table: 340 mmVertical movement of the table: 400 mmTable size: 1000 x 400 mmwith 5 T-slots to DIN, width: 18 mmDistance: 70 mmLongitudinal path: 700 mmDistance from spindle nut to lower edge of counterholder: 145 mmHorizontal spindle center to table reach: 0 - 400 mmVertical spindle clearance to table: 0 - 500 mmDistance from vertical spindle center to main stand: 100 - 500 mmSpeeds of the work spindle 16 Dr. Ing. horizontally: 32 - 2800 rpm.16 speeds vertical: 32 - 2800 rpm.Feed rates stepless for all three directionslongitudinal: 15 - 600 mmtransverse: 15 - 600 mmvertical: 6 - 240 mmRapid traverse for all three directions of movement along: 2000 mm / mintransverse: 2000 mm / minvertical: 800 mm / minTotal engine power: 9.6 hpWeight approx. 2700 kgTotal height: 1740 mmused, from oper ...

Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Divider as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine make PRVOMAJSKA - MACMON type M 100Fabr. -No: 944 built in 1978Table longitudinal movement X: 310 mmSpindle traverse Y: 170 mmTable perpendicular Z: 340 mmSpindle mount: ISA 40Projection: 210 mm16 spindle speeds: 40 - 2000 rpm.16 feeds: 9 - 450 mm / minvertical clamping surface: 640 x 195 mmTable size rigid table Clamping area: 600 x 210 mmwith 4 T-slots alongTable size rigid table total: 690 x 380 mmDrive power: 1.5 / 2.2 kWExternal dimensions of the machine: 1066 x 1048 x 1800 mmWeight approx .:370 kgWith:- rigid angle table- different tool holders- Viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Universal tool milling machine make VEB Uhrenwerke Ruhla type VRB 2242Mash. -No: 576Table longitudinal path X: 400 mmUpper arm lateral travel Y: 300 mmTischsenkrechtweg Z: 380 mm18 spindle speeds: 45 - 2240 rpm.Spindle mount: ISA 40Pinolenweg: 80 mm18 feeds: 8 - 400 mm / minRapid traverse X and Y: 1600 mm / minRapid traverse Z: 800 mm / minDrive power: 2.8 kWTotal connection power: 5.5 kWDimensions: 1600 x 1500 x 2400 mmWeight approx: 1800 kgWith- rigid angle table- 3-axis digital display, however, only thexa0xa0xa0 transverse axisused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical console milling machine make HECKERT type FSS 315 SMachine -No: 314212/2 Year 1992Table longitudinal path X-axis: 950 mmKonseol vertical path Y-axis: 450 mmTransverse Z-axis: 500 mmCross slide cross travel: 270 mmTable size W x L: 430 x 1600 mmNumber of clamping stages: 4Table load: 1000 kgSpindle mount: ISA 4018 speeds: 28 - 1400 rpm.18 feeds lengthwise: 16 - 800 mm / minxa0xa0xa0 vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minDrive power: 1.5 kWConnected load: 8.0 kWDimensions: 2800 x 2800 x 1995 mmWeight approx: 3000 kgWith- swivel spindle head- tableau control- Control cabinet SIEMENS- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW tool adaptor: tool taper: HSK-A 100 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2-axis (simultaneous) fork type milling head Power capacity - milling spindle Milling spindle 35 KW from 5000 rpm Spindle speed max. 12000 rpm Swivel range: A axis + / -95 deg C axis 360 deg Note: Milling head was only a short time in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine make DECKEL type FP 2Mash. -No: 45731Table length travel: 390/400 mmTable height path: 390/400 mmHeadstock cross-section: 190/200 mmHorizontal spindle extendable: 100 mmTable mounting surface: 740 x 255 mm18 spindle speeds: 40-2000 rpm.Spindle mount: ISA 4018 automat. Feeds: 8 - 400 mm / minRapid traverse: 1200 mm / minDrive power: 2.2 kWDimensions: 1550 x 1400 x 1410 mmWith- rigid angle tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

spindle diameter: 110 mm weight: ca. 130 kg Used spindle support for a Table Type Borer, for example UNION BFK with 110 mm spindle dia. Good condition ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6200 mm y-travel: 1070 mm z-travel: 1000 mm Table dimensions: 1030 x 8000 mm control: Siemens Sinumerik 8 MC taper ISO: 50 spindle speeds: 15 - 1595 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine make MACMON type M 100 CMachine -No: 257 ISO built in 1969Technical specifications:Longitudinal table movement X: 310 mmSpindle hole transverse movement Y: 170 mmTable vertical travel Z: 340 mmSpindle mount: ISA 4016 spindle speeds: 40 - 2000 rpm.16 feeds, all axes: 9 - 450 mm / minvertical clamping surface: 640 x 195 mmDrive power: 1.5 / 2.2 kWDimensions: 1066 x 1048 x 1330 mmWeight approx: 870 kgWith- Universal table- rigid angle table 600 x 215 mm- Counterholder- various tool holders- Vertical milling head quill stroke 70 mm- cooling devicelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine make WENIG type Wemas 6Fabr. -No: 1347, built in 1998Table clamping surface: 230 x 1000 mmTravel length X: 555 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0transver se Y: 230 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0vertical Z: 420 mmFeed rates along X: 16 - 190 mm / minRapid traverses along X: 1620 mm / minTable can be swiveled: + - 45 °Milling spindle: ISO 40Spindle speeds: 12 - 1138 rpmVertical head swiveling: + - 45 °Distance vertical spindle - table: 0 - 290 mmHorizontal spindle: ISO 40Spindle speeds: 52 - 1138 rpmDistance horizontal spindle - table: 0 - 420 mmDistance spindle - counterholder: 120 mmDrive power: 6 kWWeight of the machine: 1.1 tExternal dimensions L x D x H approx: 1040 x 1000 x 1730 mmWith- Horizontal milling device- Vertical milling head (separately in box)- various accessories- fixed operator panel- ...

x-travel: 1800 mm y-travel: 1200 mm z-travel: 900 mm total power requirement: 50 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic copying device: x ja/nein converter: x ja/nein turning speeds: 11000 U/min Number of knives: NA z= Diameter: NA mm Length: mm Shank diameter: mm Motor output: kW Dimensions (L/W/H): mm Vertikal stroke: mm Table dimensions: mm Dust suction hood: mm Diameter of the saw arbor: mm Length of the rolling table: mm Sawblade tiltable: ° milling stroke vertical: mm total power requirement: kw Weight: kg Spindle diameter: mm Length of the planing table: mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. : St. Number of tools: St. Working width: mm Year: Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adj ...

Vertical milling machine make IBERIMEX - LAGUN type FVA 4 LAMachine -No: 2496 Year 1978Technical specifications:Table size 1800 x 380 mmTable path X 1320/1300 mmCross table Y 360/340 mmTable perpendicular Z 428/420 mmSpindle mount ISA 50Speed range 28 - 1400 rpm.12 longitudinal and transverse feeds 12 - 780 mm / min.12 vertical feeds 3.6 - 234 mm / min.Rapid traverse longitudinal and transverse 3000 mm / min.Rapid traverse vertical 900 mm / min.Distance spindle / table 555 mmaut. Quill stroke 127 mm3 aut. Quill feeds 0.05 / 0.1 / 0.2 mm / rev.Milling head swivelable on both sides by 45 °Drive power 12.5 hpFeed motor 4.0 hpExternal dimensions L x W x H 2050 x 2700 x 2475 mm Weight approx. 4.3 t With - round table used, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding ...

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Angular milling unit suitable for IMA - incompatible with a Weeke plug

Vertical milling machine make RECKERMANN type GFS 1500Year of construction 1988Table size: 1500 x 560 mmTable movement lengthwise: 800 mmTable movement across: 420 mmTable movement vertical: 450 mm16 spindle speeds: 32 - 1800 rpm.Quill adjustment: 125 mmTool holder: ISA 5018 longitudinal and transversal feeds: 8 - 400 mm / min.18 vertical feeds: 3.2 - 160 mm / min.Rapid traverse longitudinally and transversely: 3.5 m / min.Rapid traverse vertical: 1400 mmProjection (stand / center spindle): 150 - 600 mmDistance table / spindle: 45 - 620 mmDrive power: 6.4 / 7.8 kWWeight approx: 4.5 tOutside dimensions approx. 2250 x 2100 x 2150 mmWith- Mot. brake for spindle lock during tool change- Vertical milling head + - 90 ° swiveling- Cooling device- different tool holdersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or  ...

Universal console milling machine make WMW HECKERT type FU 355 x 1250Masch. -No: 47512/1962 built in 1962Table mounting surface: 355 x 1250 mmTable can be swiveled 45 ° on both sidesTable can be swiveled: + - 45 °Table longitudinal path X: 1120 mmCross slide cross travel: 345 mmConsole vertical path: 400 mmTable load max .: 1500 kgSpeed range: 28 - 1400 rpm.Feed area longitudinal and transversal: 16 - 800 mm / minFeed range vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minTool holder: ISO 50Drive power: 14.5 kWWeight: 3850 kgExternal dimensions: 2400 x 2300 x 1800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available  ...

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine make DECKEL type FP 1Mash. -No: 54203/08Technical specifications:Longitudinal movement of the table X 250/245 mmTransverse movement of the headstock Y 150 mmVertical movement of the table Z 340/335 mmSpindle mount ISA 40Speeds 40 - 2000 rpmvertical table slide 550 x 195 mmQuill stroke of the vertical milling head 60 mm12 feeds longitudinal and vertical 9.5 x 475 mm / minDrive power 1.2 kWDimensions 700 x 1000 x 1600 mmWeight approx 560 kgWith- Digital display- separate control cabinet- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t dimensions: 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Make GRUPP Type UF 2 Type LVQEYear of construction 1971Table size: 1000 x 275 mmTable longitudinal path X: 900 mmCross table Y: 220 mmTable vertical Z: 450 mmThe table can be tilted to either side: 45 °Spindle diameter: 70 mmSpindle mount: MK 412 spindle speeds: 45 - 2000 rpm.24 longitudinal and transverse u. Vert. Feed rates: 8 - 350 mm / minDrive power: 4 kWFeed motor: 1.3 / 1.6 kWtotal power consumption: 5.7 kWDimensions L x W x H approx: 2200 x 1600 x 1950 mmWeight approx: 1630 kgWith- Vertical milling head VKUP (universal swiveling)- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

spindle taper: 2 x 40 ISA forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,20 x 2,66 x 1,76 m with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres,  ...

Profilator make WERA type RM 60Mash. -No: 4051386Spindle passage: 32 mmClamping diameter max: 42 mmMax. Clamping length: 350 mm at Drm. 42 mmmin./max. Mandrel diam.: 10 / 60 mmClamping force: 2160 daN at 30 barMachining dimensions infinitely adjustable: 1 scale = 0.02 mmWorking diameter max: 50 mmMounting taper chuck: DIN 55021 Gr. 5Milling head speed M: 600, 800, 1000 rpm.Knife head speed R: 1850, 2100 rpm.Feed per cutting edge: 0.1 - 0.5 mmStandard division M: 1Standard pitch R: 1Hydraulic operating pressure: 30 barHydraulic motor: 2.2 kW:Drive motor: 3.0 kWConnected load: 7.0 kWBase area: 1750 x 1200 mmWeight approx: 2000 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. ...

Hor. Milling Machine make RUMAG type REG 5Masch. -No: 383 Come. -No: 34280 Year 1975Table size: 700 x 200 mmTravel X-axis: 350 mmTravel Y-axis: 170 mmTravel Z-axis: 250 mmSpindle mount: MK 318 spindle speeds: 71-2800 rpm.9 automat. Table feeds: 16-500 mm / minDrive power: 2.0 kWOutside dimensions approx: 1200 x 1200 x 1600 mmWeight approx: 800 kgWith- Cooling device- Table length feed- Vertical and transverse movement manually- Counterholder- hor. arborused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t dimensions of the machine ca.: 6,6 x 3,15 x 2,98 m = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures ...

Universal tool milling machine make DECKEL type FP 1Mash. -No: 54833/08Longitudinal movement of the table X: 250/245 mmTransverse movement of the headstock Y: 150 mmVertical movement of the table Z: 340/335 mmSpindle mount: MK 412 Hor.-speeds: 60 - 1200 U / min12 Vert.-speeds: 95 x 1900 rpmvertical table slide: 550 x 195 mmQuill stroke of the vertical milling head: 60 mm12 feeds longitudinal and vertical: 9.5 x 475 mm / minDrive power: 1.2 kWDimensions: 700 x 1000 x 1600 mmWeight approx: 560 kgWith- rigid angle table- several tool holders- original vice- separate electrical cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm size of pallet: 630 x 500 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 1 - 4000 mm/min rapid travel x/y/z: 10 / 8 / 10 m/min control: PHILIPS CNC 432 spindle motor: 15 kW total power requirement: kW weight of the machine ca.: 6,0 t dimensions of machine: 4,10 x 2,17 x 2,55 m acc.: hydr. swivelling head with hydr. tool clamping, chip conveyor, coolant, entire protection cabin with pallet changer (two pallets) and 60-pos. tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping.  ...

Universal tool milling machine make KNUTH type WF 5Machine -No: 108788 Year 1996Travel X: 400 mmTravel Y: 320 mmTravel distance Z: 440 mm18 spindle speeds: 63 - 3150 rpm.Spindle mount: ISA 40Projection: 165 - 485 mmTable size: 800 x 320 mmFeeds stepless: 10 - 1000 mm / min.Rapid traverse: 2000 mm / minDrive power: 3.0 kWDimensions approx: 1700 x 1660 x 1890 mmWith- 3-axis digital display- rigid angle table- Vice- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.