128,002 used machines on RESALE, but how to find them? Machine Search
CONTROLS electronic controls SIEMENS ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz
Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1500 mm space requirements -front/back-: 1250 mm total height: 2100 mm - Polishing cell C710 (1970 houres in production) Equipment of the machine: Collaborative UR3 e-series robot with intuitive HMI Automatic compensation for tool wear Polishing station Crevoisier C5100 (drive polishing tools) Spindle for holding standard Crevoisier collets Integrated suction with 14m/s Renishaw measuring probe for position detection Palletizing for approx. 40 STK 2 Pal. Two polishing paste dispensers with a capacity of three liters each
A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible.
drum dimension 1250x700mm capacity - kg/charge ca 500 Kg drum rotation speed 40 / min
CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)
Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg
MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)
BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)
Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)
RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)
Superfinishing of cylindrical workpieces of all kinds, also with heels, since the lifting device of the SF is available: rolling elements, piston pins, shock absorber rods, etc. Machine Type: RollerPro 474 Machine No.: 300841001 Technical data Superfinish Stone Processing Diameter 4 – 150 mm Condition: Technical – good / Optical – used (Pictures partly similar)
Superfinish machining of cylindrical workpieces. Machine type: RollerPro 470 Machine No.: 780707 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece diameter: 5 – 100 mm Length: 5 – 250 mm Stone Guides: Up to 10 Roller diameter: max 140 mm Roller length: 900 mm Condition: Factory New (Pictures partly similar)
Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)
Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)
Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360041 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Factory New (Pictures partly similar)
honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.6 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter 3 jaw chuck: 160mm , rpm : 700, 1400, 2800 , Max. power: 1.7kW , see photos for more details Auction-ID: A7-48332-519
Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48339-226
honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.48 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0429 Brand: AGLA Model: 1200 Automatic 1-roll polishing machine for polishing polyester and polyurethane paints, wood, metals, marble and similar materials Technical specifications: Sturdy construction Work surface dimensions: 3600 x 1260 mm Working width 1200 mm Working height 300 mm Brush diameter 350 mm Motor 15 Hp Automatic work surface lifting 2 workpiece clamps Overall dimensions mm 3600 x 2180 x 1650 h Weight kg 1700
Operating width: 100mm Equipped with spare parts & accessories Auction-ID: A1-48232-35
Polishing Machine Motor power 750 watts Diameter of the polishing wheels 200 mm. Axial dimension 16 mm. Speed 2950 rpm. Condition: never used / new (5) Auction-ID: A7-48486-81
Polishing bench with 2 polishing brushes Grinding wheel diameter 250 mm Number of stations 2 pieces Connection voltage 230 V Speed 2850 rpm Total power requirement 1.5 kW Machine weight approx. 25 kg Dimensions L x W x H 0.65 x 0.32 x 0.35 m Condition: never used / new (5) Auction-ID: A7-48486-69
Polishing trestle Connection voltage 400Volt Diameter of polishing wheelsmax 250mm. Speed 2800 rpm. with base frame and cooling basin Condition: unchecked (6) Auction-ID: A7-48486-186
Würth Polishing Machine - PM 200-E. Condition: used, but in top condition. Technical data: Rated voltage: 230 V/AC Frequency: 50 Hz Protection class: protection class II / protective insulation Power consumption: 1200 W Power output: 750 W No-load speed min./max.: 900-2700 rpm (rpm) Polishing body diameter max.: 200 mm Thread Type x Spindle Thread Diameter: M14 Length x width x height: 370 x 85 x 150 mm Machine weight: 2.5 kg Cable length: 4 m Description: For painted and metal surfaces With the appropriate accessories, the PM 200-E replaces a satin finishing machine Very handy and light Low effort when working on side surfaces Safe and targeted polishing Double-reduction gearbox enables very low speed Increased safety for the user Soft start and restart protection (after power interruption) Auction-ID: A1-48530-2726
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48622-226
Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48621-226
A Rösler circular vibratory finishing machine is available. Working bowl volume: 620l, bowl outside diameter: 1650mm, working channel width: 430mm, speed: 1485rpm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
140 € 
