polishing stack used for sale

CONTROLS   electronic controls SIEMENS ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

Cutlery polishing machine GGM Gastro type BPE 300, 3000 pieces/h, power 0.6 KW Auction-ID: A7-45677-81

Polishing bench with 2 polishing brushes>br>grinding wheel diameter 250 mm>br>Number of stations 2 pieces>br> connection voltage 230 V>br>speed 2850 rpm>br>Total power requirement 1.5 kW>br>Machine weight approx. 25 Kg>br>Dimensions L x W x H 0.65 x 0.32 x 0.35 m >br>Condition: never used / new (5)

Defective.

equipped with 4 deburring / polishing drums with lid, on motor, power: 1 KW, 4 ProMinent beta/4 dosing pumps, 2 SIEMENS SIMATIC Toch operator panels on aluminium frame

Polishing Machine Motor power 750 watts Diameter of the polishing wheels 200 mm. Axial dimension 16 mm. Speed 2950 rpm. Condition: never used / new (5)

Polishing Machine>br>Motor Power 750 Watts >br>Diameter of Polishing Wheels 200mm.>br>Axial Distance 16mm.>br>Speed 2950rpm>br> >br>Condition: Never Used/New (5)

Polishing machine Brand: BAUERRICHTER Type: SL1 1350X3500 table size: 1400x4000mm work area: 1350x3500mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

grinding wheel diameter: 200 mm no. of working stations: 2 Stück connected load frequency: 230 V total power requirement: 0,9 kW weight of the machine ca.: 20 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

Machine for polishing and belt edges

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

grinding wheel diameter: 250 mm no. of working stations: 2 Stück connected load frequency: 230 V turning speeds: 2850 U/min total power requirement: 1,5 kW weight of the machine ca.: 25 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2.0 kW weight of the machine ca.: 23.0 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing p ...

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

Polishing machine Emme Elle Surface polishing machine Type: LBA 1300 automatic Year of Make: 1995 Working width 1300 mm Height of the workpiece to be polished maximum 100 mm Vacuum table with 2 working levels Table length 6 meters each with vacuum clamping While polishing is done on one level, the second can be used, or the workpieces are accepted and replaced. 4 rotating and oscillating polishing rollers are used. Includes 4 new polishing rollers! Rotation adjustable from 5-25 rpm. Feed speed adjustable from 2 – 5 m/min. After the polishing process has been completed, the rollers lift off the workpiece and four rotating plates equipped with special foam polish the surface. The rotation and direction of rotation as well as the polishing time of the rollers and polish plates can be different. Connected load 26 kW 4 polishing units length 500 mm Polishing roller  ...

A single-disc flat lapping machine is offered, which can be converted into a polishing machine very quickly. It is equipped with the pneumatic pressure device. Base cabinet is included. It comes with a lot of accessories, such as: - A total of 3 lapping slices, each with a lot of meat - Flatness measurement gauge - 3 hand weights - About 50 workpiece holders - Ceramic dressing rings - Shims - Various diamond pads - 2 x 2000g Kemet Liquid Diamond Type K Str 3Micron - 3 x 2000g Kemet Liquid Diamond Type K Str 6Micron - 2 x 2.5l Kemet Lubricating Fluid Type OS-2 And a lot more accessories

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

Wet-grinding honing and polishing machine DICK, nameplate cannot be found, disc ø 150 mm, total 3 shafts, 380 V, table model

Polishing jack BOLEY, no nameplate found

Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h

RED MOUNTAIN - Polishing Bench -Stepless speed regulation 200 - 1100 rpm -Automatic brake -Chuck diameter 200mm with interchangeable jaws -Tip height 300mm -Drive power 0.75KW -Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95Kg

Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-44802-226

Polishing Machine>br>Motor Power 750 Watts >br>Diameter of Polishing Wheels 200mm.>br>Axial Distance 16mm.>br>Speed 2950rpm>br> >br>Condition: Never Used/New (5) Auction-ID: A7-44817-249

Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-44803-226

Polishing frame>br>connection voltage 400Volt >br>diameter of the polishing wheelsmax 250mm.>br>speed 2800 rpm>br>with base frame and cooling basin>br> >br>condition: untested (6) Auction-ID: A7-44817-228

Polishing bench with 2 polishing brushes>br>grinding wheel diameter 250 mm>br>Number of stations 2 pieces>br> connection voltage 230 V>br>speed 2850 rpm>br>Total power requirement 1.5 kW>br>Machine weight approx. 25 Kg>br>Dimensions L x W x H 0.65 x 0.32 x 0.35 m >br>Condition: never used / new (5) Auction-ID: A7-44817-222

drum dimension 1250x700mm capacity - kg/charge ca 200 Kg drum rotation speed 40 / min

Complete set of 11 high-frequency grinders including 3 matching transformers, designed for simultaneous operation of all devices. This professional system comes from well-known manufacturers such as Bosch, Steinel, Himmelwerk (Tübingen), AvK (H. van Kaick, Ettlingen) and AEG and was developed for continuous industrial operation. The sanding machines are ideal for fine and precision grinding work, polishing processes or deburring work on wood, plastic and metal. Thanks to the high-frequency technology, they offer a uniform speed of up to approx. 12,000 rpm, very smooth running and a particularly fine surface quality. The three transformers (AvK type FD2-2, AEG type D0723B, Himmelwerk type BHR127/95) deliver the necessary high-frequency voltage of 200 Hz and ensure a stable, high-performance power supply. All units are fully functional, regularly serviced and ready for immediate use.  ...

cloth lapper, polishing wheel, grinding wheel -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible.

Unused; Polishing discs: diameter 80, 120, 350 and 400 mm; fleece discs: diameter 400 and 450 mm; in mesh box Auction-ID: A1-45447-26

Quantum Qsm 175 Double Grinder Grinding Machine Double Grinding Machine Auction-ID: A7-45427-243

Polishing Machine Motor power 750 watts Diameter of the polishing wheels 200 mm. Axial dimension 16 mm. Speed 2950 rpm. Condition: never used / new (5) Auction-ID: A1-45681-877

Polishing bench with 2 polishing brushes Grinding wheel diameter 250 mm Number of stations 2 pieces Connection voltage 230 V Speed 2850 rpm Total power requirement 1.5 kW Machine weight approx. 25 kg Dimensions L x W x H 0.65 x 0.32 x 0.35 m Condition: never used / new (5) Auction-ID: A1-45681-817

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 1250 mm   total height: 2100 mm - Polishing cell C710 (1970 houres in production) Equipment of the machine: Collaborative UR3 e-series robot with intuitive HMI Automatic compensation for tool wear Polishing station Crevoisier C5100 (drive polishing tools) Spindle for holding standard Crevoisier collets Integrated suction with 14m/s Renishaw measuring probe for position detection Palletizing for approx. 40 STK 2 Pal. Two polishing paste dispensers with a capacity of three liters each

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Manual control stackers with electric – hydraulic gear. Lifting heights: 3000 mm. Acumulator: 12 V / 150 HP. With acumulator power indicator. Electric lifting gear motor: 1,8 kW. Lifting capacity: 1000 kg. Fork length: 1150 mm. Fork width: 550 mm. Standard free lifting course: 20 mm. Polyurethan wheels. Weigth: 466 kg.