We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,323 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
x-travel: 520 mm y-travel: X mm z-travel: X mm weight of the machine ca.: 0.2 t Dividing head with collets www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 840 mm turning diameter over slide rest: 550 mm turning length: 4000+2000 mm weight of the machine ca.: 9 t Adjustable base +2000mm electrical Lots of accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 370 mm plate thickness: 0-2 mm work piece width: x mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.6x0.4x1.1 m Dressing device Exhausting device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 910 mm turning diameter over slide rest: 670 mm turning length: 3000 mm turning dia. in gap: 1200 mm spindle turning speed range: 7-800 U/min weight of the machine ca.: 5.3 t dimensions of the machine ca.: 5x1.6x1.7 m Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 400 mm plate thickness: 4 mm total power requirement: x kW weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.7x1x2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
workpiece length: x mm work piece width: x mm workpiece height: x mm table-size: 200x110 mm grinding height: 230 mm cup wheel dimensions: 150 mm weight of the machine ca.: 0.13 t dimensions of the machine ca.: 0.6x0.6x1.5 m Magnetic table D-125mm Dressing attachment www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding length: 800 mm grinding width: 500 mm workpiece height: 480 mm table-size: 800x400 mm weight of the machine ca.: 3.4 t Magnetic plate 800x400mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
width of the strips: 50 mm band length: x mm band speed: x m/min speeds: 1800-3600 U/min total power requirement: 5.5 kW weight of the machine ca.: 0.6 t 1x Belt 1x Polishing www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t distance between columns: 360 mm stroke: 400 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1.8x1.6x2.7 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. grinding diameter: x mm grinding length: 120 mm workpiece length: 270 mm table-size: 270x80 mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.8x0.7x1.4 m Dividing head Collet set Coolant MORE DETAILS ON www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter: 600x400 mm table height: x mm table load: x t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 760 mm width: 700 mm height: 1500 mm Several executions PICTURES AND MORE INFORMATION ON www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 75 mm x-travel: 800 mm y-travel: 1300 mm vertical movement: 1000 mm spindle taper MT: 5 spindle turning speed range: 14-1500 U/min table-size: 1000x850 mm weight of the machine ca.: 6.7 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1200 mm y-travel: 350 mm z-travel: 350 mm table-size: 1800x405 mm spindle taper ISO: 50 spindle turning speed range: 30-1800 U/min weight of the machine ca.: 4.4 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm table-size: 1080x580 mm spindle taper: SK40 spindle turning speed range: 10000 U/min tool change unit: 30 weight of the machine ca.: 10 t HEIDENHAIN TNC430 Coolant through spindle www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): x mm bore capacity in steel (diameter): x mm throat: x mm throat: x mm bore stroke: x mm bore stroke: x mm POLYHEDRAL DRILLING MACHINE Drilling range: -Square: Spanner opening 3-27mm -Hexagon: Spanner opening 3-32mm Drilling depth: -Square -14mm -Hexagon-13mm Throath150mm Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 650 mm grinding width: 450 mm workpiece height: 325 mm table-size: 600x350 mm grinding wheel diameter: 350 mm weight of the machine ca.: 2.7 t Magnetic table 600x400mm Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding length: 500 mm grinding width: 250 mm workpiece height: 275 mm table-size: 500x180 mm weight of the machine ca.: 1.1 t Balancing device integrated Magnetic plate 500x200mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable
used
x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 800 mm y-travel: 630 mm z-travel: 710 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. turning speeds: 30-12000 U/min tool taper: HSK 63 Tool changer: 80 Pos. Feed: 1-40.000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Doppelwendespanner Maschinennummer 0552.80.00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
grinding wheel diameter: 200 mm no. of working stations: 1 Stück grinding wheel width: 19 mm grinding band dimension: 100 x 1150 mm turning speeds: 2850 U/min saw band speed: 30 m/s grinding wheel size: 200 x 19 x 20 mm grinding wheel speeds: 2850 U/min grinding band dimension: 100 x 1000 mm total power requirement: 0,75 kW weight of the machine ca.: 31 kg Heavy duty universal grinding and sanding machine in industrial quality. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. Supplied with additional polishing disc and steel brush. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection steel brush grinding belt polishing disc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm
used
Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW
used
Eccentric press #5449 Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Max force: 45 t Weight: 2550 kg
used
grinding diameter: 350 mm grinding length: 1040 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m internal grinding device magnet clamping chuck coolant device tail stock Technische Daten / technical details: Spitzenhöhe / center height 180 mm Spitzenweite / center to center 1120 mm max. Schleiflänge / max. grinding lenght 1040 mm gr. Werkstückdurchmesser / max. work piece diameter 350 mm Schleifscheibenabmessungen / grinding wheel diamensions 400x63x127 mm Schwenkbarkeit des Tisches / table swivable 9 ° Drehzahl Schleifspindel / spindle speed 32 m/s Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,5 kW Gewicht der Maschine ca / weight ca 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine a ...
used
Degranner Capacity: 100 t/h Working width: 2 x 1780 mm with 2 x 72 rackets each Drive power: 2 x 18.5 kW three-phase motors via control drive Drive power feed rollers: 2 x 0.12 kW SEW gearbox
used
MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), ...
new
Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](https://en.wikipedia.org/wiki/Cerium(IV)_ox ...
used
Transport armored castors - frame for presses automatic lathes laser etc. 1 x Swivel caste set and 2 x fixed castor Large version 10 - 18 to Frame has been serviced , and is smooth. Condition : Very good . A tank caster frame that makes you happy. Says Pradler Maschinen Service
used
Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors
used
MAschinen Details Warehouse number 1105-03470 Machine Type Machining Center - Vertical Make DMG DECKEL MAHO Type DMF 180 linear Year of construction 2012 Control type CNC Control SIEMENS 840 D Storage location FRANCE Country of origin Germany Delivery time 1 month after order Freight base from location Technical details x-path 1800 mm y-way 700 mm z-way 700 mm Control SIEMENS 840 D 840 D Table clamping surface 2600 x 600 mm Table load 2 t Speed 18000 rpm Recording ISO SK 40 Tool changing device 30-fold Rapid speed 50 m/min Operating hours 53000 h Spindle hours 13500 h Total power requirement 36 kVA Machine weight approx. 11 t Space requirement approx. 4.40 x 2.45 x 2.65 m Information LID MAHO DMG DMF 180 Linear Equipment direct path measuring system RIGID TABLE WITH INTEGRATED RUNNING TABLE D.750 MM CENTRALLY ARRANGED NICT WITH IKZ 600 liters 40 bar PAPER ...
used
Complete Printshop for sale: Booklet Maker SDD BLM 6100 corner punch Beier Multinak-S Perforator Hang Maschinenfabrik Type 136D Grooving and perforating machine E. Bickel HK 3/68 Rotaprint R40 AK Cutting machine Polar Moor 90EL (this has to be taken apart for removal) mini gathering machine Duplo DC-10 Pallet truck 114 cm fork trolleys (10 pieces) 2-tier trolley (3 pieces) 4-tier trolley (1 piece) vibrating table (1 piece) Package Price: on request
used
grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...
used
Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...
used
Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service - ...
used
Universal Vertical Milling Head This milling head was used on a Union TC130 table boring machine and can be adapted to many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
NC Rotary Table Manufacturer: Eimeldingen Table size: 1100 x 840mm Infinitely divisible Condition: As good as new About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Willi Maschinenbau P-350 Inclined flow wrapping machine
used
Stroke: 750 mm Make Atlas shaping Type W 7 Year shaping / kurzhobel hobel maschine Stroke = 750 mm X / Y = 490 x 500 Stroke tool holder = 175 Head rotation + / - 60 Gr.- Table = 560 x 480 - Speed 12 - 132 M/min
used
sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bread slicer Treif Diskus circular knife? Product? Manufacturer: Treif Maschinenbau GmbH? Model: Discus? Material: stainless steel? Condition: used, in working order, baker's condition - please clean thoroughly before use? Year of construction: 2004? Cutting width adjustable? With circular knife / round knife? Wheeled, on wheels? Price on request? External dimensions: W.: 98 cm, D.: 69 cm, H.: approx. 107 cmSee pictures for details
used
Treif Discus Bread Slicer Circular Knife? Product:? Manufacturer: Treif Maschinenbau GmbH? Model: Discus? Year of construction: 2006? Material: stainless steel? Condition: used, in working order, baker's condition - please clean thoroughly before use? Cutting width adjustable? With circular knife / round knife? on wheels, drivable? Current type: 3-N-PE, 50 Hz? Operating voltage: 400 V? External dimensions: W.: 98 cm, D.: 69 cm, H.: 106 cmSee pictures for details
used
Treif Pegasus Bread Slicer Sickle Knife Stainless Steel? Product? Manufacturer: Treif Maschinenbau GmbH? Model: Pegasus 2622? Material: stainless steel? Condition: used, in working order, baker's condition - please clean thoroughly before use? Year of construction: 1997? Cutting width adjustable? with sickle knife? Wheeled, on wheels? Current type: 50 Hz? Operating voltage: 400 V? Nominal power: 0.75 kW? External dimensions: W.: 100 cm, D.: 67 cm, H.: 120 cm