polish used for sale

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

grinding wheel diameter: 200 mm no. of working stations: 2 Stück connected load frequency: 230 V total power requirement: 0,9 kW weight of the machine ca.: 20 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Machine for polishing and belt edges

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2.0 kW weight of the machine ca.: 23.0 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing p ...

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Manufacturer: Homag Eckenkopierschwabbeln, Type: FS 11/FS 10, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Eckenkopierenfunktion: yes, Motorenanzahl: 1, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 2 X 1405017, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Year :1996

Polishing machine Emme Elle Surface polishing machine Type: LBA 1300 automatic Year of Make: 1995 Working width 1300 mm Height of the workpiece to be polished maximum 100 mm Vacuum table with 2 working levels Table length 6 meters each with vacuum clamping While polishing is done on one level, the second can be used, or the workpieces are accepted and replaced. 4 rotating and oscillating polishing rollers are used. Includes 4 new polishing rollers! Rotation adjustable from 5-25 rpm. Feed speed adjustable from 2 – 5 m/min. After the polishing process has been completed, the rollers lift off the workpiece and four rotating plates equipped with special foam polish the surface. The rotation and direction of rotation as well as the polishing time of the rollers and polish plates can be different. Connected load 26 kW 4 polishing units length 500 mm Polishing roller  ...

Manufacturer: Homag, Type: Schwabbelaggregate, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Oszilierend : yes, Motorenanzahl: 2, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 150, Bürstenbreite mm: 30, Kw output: 0,25, Volt/Hz: 30/50, Drehzahlen U/min: 2850, pneumatisch ansteuerbar: yes, Year :1996

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

grinding wheel diameter: 250 mm no. of working stations: 2 Stück connected load frequency: 230 V turning speeds: 2850 U/min total power requirement: 1,5 kW weight of the machine ca.: 25 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cloth lapper, polishing wheel, grinding wheel -Manufacturer: Flex, grinding-polishing sleeves grain 600 -Order No.: 318.175 -Diameter: Ø 90 x 100 mm -Use: for satin finishing machine Flex LP 1503 VR -Number: 11x polishing sleeves available -Price: per piece, minimum order 3 pieces -Packaging dimensions: 160/150/H15 mm -Weight: 0.05 kg

CONTROLS   electronic controls SIEMENS ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 1250 mm   total height: 2100 mm - Polishing cell C710 (1970 houres in production) Equipment of the machine: Collaborative UR3 e-series robot with intuitive HMI Automatic compensation for tool wear Polishing station Crevoisier C5100 (drive polishing tools) Spindle for holding standard Crevoisier collets Integrated suction with 14m/s Renishaw measuring probe for position detection Palletizing for approx. 40 STK 2 Pal. Two polishing paste dispensers with a capacity of three liters each

Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

drum dimension 1250x700mm capacity - kg/charge ca 500 Kg drum rotation speed 40 / min

A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible.

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

Diameter 3 jaw chuck: 160mm , rpm : 700, 1400, 2800 , Max. power: 1.7kW , see photos for more details Auction-ID: A7-48332-519

Without content Auction-ID: A7-48410-860

Without content Auction-ID: A7-48410-856

Equipped with 3300x2400mm safety gate Auction-ID: A1-48232-189

Without content Auction-ID: A7-48410-862

Without content Auction-ID: A7-48410-861

Without content Auction-ID: A7-48410-857

Without content Auction-ID: A7-48410-858

Without content Auction-ID: A7-48410-863

Operating width: 100mm Equipped with spare parts & accessories Auction-ID: A1-48232-35

Polishing Machine Motor power 750 watts Diameter of the polishing wheels 200 mm. Axial dimension 16 mm. Speed 2950 rpm. Condition: never used / new (5) Auction-ID: A7-48486-81

Polishing bench with 2 polishing brushes Grinding wheel diameter 250 mm Number of stations 2 pieces Connection voltage 230 V Speed 2850 rpm Total power requirement 1.5 kW Machine weight approx. 25 kg Dimensions L x W x H 0.65 x 0.32 x 0.35 m Condition: never used / new (5) Auction-ID: A7-48486-69

Polishing trestle Connection voltage 400Volt Diameter of polishing wheelsmax 250mm. Speed 2800 rpm. with base frame and cooling basin Condition: unchecked (6) Auction-ID: A7-48486-186

Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding  ...

Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48622-226

Polishing machine for car bodywork, power 1100 W, never used Overall dimensions: 400 x 200 x 200 mm Weight: 32 kg Auction-ID: A7-48621-226

Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)

BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)