po used for sale

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-759

The distance between the needles: 10 mm; Missing needle pill; Auction-ID: A7-45992-164

\" Item (2x) Outer micrometer 125 - 175 mm 1st outer micrometer 125–150 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 150 mm Analog shackle measuring screw for external measurement in the range 125–150 mm.Solid cast iron bracket with hammered finish. With locking lever and ratchet. Delivered in the original wooden box. Typical industrial version from GDR production. Used, neat condition. 2. Outer micrometer 150–175 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 175 mm Supplied in wooden case. 1st outer micrometer 125–150 mm • Measuring range: 125–150 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box 2nd outer micrometer 150–175 mm • Measuring range: 150–175 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box \" Auction-ID: A7-46417-283

\" 5-piece batch caliper, consisting of a Mitutoyo digital caliper, as well as several analog calipers and depth calipers. 1. Mitutoyo Digital Caliper • Type: CDN-20CX • Measuring Range: 0-200 mm • Resolution: 0.01 mm • Made in Japan 2. Digital Caliper (black/yellow, • Measuring range approx. 0-150 mm 3. Analog Caliper • Measuring range approx. 0-300 mm 4. Analog Depth Caliper (T-Shape) • Measuring Range approx. 0-150 mm 5. Analog Caliper (Classic Design) • Measuring Range Approx. 0-150 mm Item: Calipers / Depth calipers – mixed lot Scope: Lot = 5 pieces Manufacturer: Mitutoyo (digital), various/unknown (analogue) Design: analog & digital mixed Measuring lengths: up to 300 mm Resolution digital: 0.01 mm (Mitutoyo) Material: Stainless steel Accessories: Protective covers / bags (partial) \" Auction-ID: A7-46417-137

There are a total of 24 pieces, 2 modules for a balcony each with inverter 420 W, 97.3 V, 4.32 A, For Outdoor Use, Durable Weatherproof Auction-ID: 049-88Z-4

The distance between the needles: 10 mm; Auction-ID: A7-45992-114

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45902-91

Hinged window; Desk; cabinets; Floor; Lighting; Fuse box; 230V; 3 sockets with USB connection; insulated; aluminum frame; lockable inside and out; Auction-ID: A1-45902-1

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-86

Distance between needles: 12 mm; Auction-ID: A7-45992-168

Distance between needles: 12 mm; Auction-ID: A7-45992-169

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-316

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-89

Eolo Plenum PL1162014 (Stock 8 pcs) Auction-ID: A7-46421-110

Distance between needles: 10 mm; Auction-ID: A7-45992-108

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-4

\" 6-piece set of U-clamp measuring screws from industrial or workshop stock. The measuring screws come from the Suhl precision instrument factory and are classic, robust industrial designs. • Mixture of disc measuring head and normal measuring head Article: U-screws / measuring screws (external measurement) Scope: 6-piece lot Manufacturer: Feinmesszeugfabrik Suhl (GDR) Storage: original wooden boxes • 4 × U-screw gauge with disc measuring head Foils , tubes • 2 × U-screw gauge with normal measuring head • approx. 0–25 mm (plastic box) • 25–50 mm • 50–75 mm • 75–100 mm • 100–125 mm • 125–150 mm \" Auction-ID: A7-46417-135

Complete vacuum evaporation system type SchoKo, with: -Expansion evaporater/vacuum tank -steam condensator -different pumps and fittings, Additional title: vacuum evaporation system, Knockout capacity: 13000 l, Volume of vacuum tank: 1471 l, Length: 2006 mm, Width: 2006 mm, Height: 2503 mm

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 70 mm   wall thickness min.: 1 mm   wall thickness max.: 6.5 mm MACHINE CHARACTERISTICS SWAGING   force: 630 kN   stroke rate (max.): 630 /min ELECTRICAL SPECIFICATIONS   total power consumption: 40 kW Tube pointing machine HAGINGER AHM 63 with slide feeder S - Material: Steel tubes with a strength of 800 N/sqmm - Max. forming force: 4 x 630 kN - Drive motor power: 30 kW

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge o ...

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Potence pour révision de centrifugeuse décanteur Alfa Laval

Probably defective, in stock on pallet, total dimensions approx. 800x600x520 mm Auction-ID: A1-45790-507

Length 275 cm; total approx. 190 pieces Auction-ID: A1-46266-366

MLVI; 1 x left and 1 x right AFM. 880x2315 mm; 1 x Left; 1 x right dim. 930x2315 mm Auction-ID: A1-46266-321

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-58

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-65

Used for molding and applying heel counters. Auction-ID: A7-46462-13

MDCX 1x right 880x2315 mm, 1x right 930x2315 mm; 2x left 930x2315 mm Auction-ID: A1-46266-320

Approx. 22 pcs. In stock on pallet Auction-ID: A1-45790-568

4 IEGT-2100 A (700.008632) 6 IEGT-1500 A (700.011453) In stock on pallet, total dimensions approx. 1200x800x350mm Auction-ID: A1-45790-588

Approx. 20 pcs. In stock on pallet, overall dimensions approx. 1200x800x1200 mm Auction-ID: A1-45790-566

Formax slicer, model: PowerMax 3500, serial number: PX3.5-16112, 400 V, 3 Ph, 50 Hz, 29.5 A, 18.5 kW, plastic belt, belt width: (2x) 100 mm, plastic wire belt, belt width: 390 mm, total dimensions: 3900 mm x 1500 mm x 2250 mm. Including trolley with knife holder, dimensions: 770 mm x 600 mm x 1350 mm.

GEA thermoformer, type: PowerPak, serial number: 50560181, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 53 A, 35 kW, film width: 565 mm, index: 335 mm, dye: (2x) 300 mm x 250 mm x 50 mm, plastic belt, belt width: 495 mm, Gardner Denver vacuum pump, type: VWP 500 (05), serial number: SC10405318002, year of construction: 2020, capacity: 485 m³/h.

Schur Technology a/s pouch bagging machine, model: Shurstar 2026 C, type: Y30016, number: 740595, year of construction: 2015, dimensions: 11500 mm x 950 mm x 2100 mm.

Consisting of 2x MILWAUKEE M4D compact screwdriver incl. 5x battery 2.0 Ah and 2x MILWAUKEE M4C charging station Auction-ID: A1-46480-3049

Consisting of 2x MILWAUKEE M12 BDD drill/driver incl. 2x battery 4.0 Ah, 1x battery 3.0 Ah, 1x battery 2.0 Ah and 2x MILWAUKEE C12C charging station as well as 1x MILWAUKEE M18 FDD2 drill/driver incl. 1x battery 4.0 Ah, 1x battery 3.0 Ah and 1x MILWAUKEE M12-18C charging station Auction-ID: A1-46480-3047

Consisting of 1x WÜRTH EPM200 rotary polishing machine and 1x FESTTOOL ETS150/5-EQ random orbital sander, incl. pads Auction-ID: A1-46480-3058

Consisting of 1x MILWAUKEE M12 CDD drill/driver incl. 1x battery 4.0 Ah and 1x MILWAUKEE C12C charging station and 1x MILWAUKEE M12 BIW 12 impact wrench incl. 1x battery 4.0 Ah and 1x MILWAUKEE C12C charging station Auction-ID: A1-46480-3048

Closed trailer of the Powertrailer brand, presumably from year of construction 2024, designed as a compact and practical box trailer in white livery. This trailer is particularly suitable for the safe and dry transport of goods, tools, materials or other loads that need to be protected against weather influences. Thanks to the closed body, the double rear doors and the neat design, this example is an interesting solution for both professional and private use. According to the available information, the trailer has dimensions of 257 x 125 x 150 cm and a GVW of 750 kg. The trailer is equipped with a galvanized chassis, a drawbar with coupling, a jockey wheel and lighting. The closed body is equipped with white panels and aluminum profiles, which ensures a neat appearance and a maintenance-friendly whole. At the rear, the trailer is equipped with double doors with locks, which allows easy ...

Perfectly working. 5 outputs additional 7 bunkers+- 3 tons per bunker. Auction-ID: A3-43525-7027

Consisting of 2x FEIN MSH643 straight grinder, 1x FEIN ASZX648 angle drill, 1x FEIN ASZ648Z drill, 1x FEIN DSCEU639 impact drill and 2x FEIN drill Auction-ID: A1-46480-3057

- Trelleborg TM900 High Power spare wheel suitable for Claas tractor; - Size: 710/70 R 42; - Used, condition see photos; - Viewing recommended; Auction-ID: A1-46334-230

Consisting of 1x BOSCH GBM13HRE drill, 2x BOSCH GBM10RE drill, 1x BOSCH drill, 2x BOSCH GGS28LCE straight grinder, 1x BOSCH GGS8CE straight grinder and 2x BOSCH GWS15-125 CIEPX angle grinder, incl. FETRA trolley and assortment measuring tool Auction-ID: A1-46480-3056

Condition: unchecked and unknown Auction-ID: A1-45996-250

Youtube function video: https://youtube.com/shorts/NzbfodNF5xA FEM3: Fits any forklift with a load capacity of 3,000-5,000kg Comes from Linde H50D. Year of manufacture: 2018 Payload: 2,400 kg Auction-ID: A1-45451-1122

• 3-point suspension (agricultural tractor category) • Hydraulically swiveling (cylinders visible) • Hydraulic hoses available • Support foot present Auction-ID: A3-43524-12276

Type: Vertical band saw Electrical supply: 380V 3F 50 Hz Auction-ID: A7-46477-7

Only about 35h hours! Olympian Caterpillar Perkins 200 KVA Emergency Power Generator Generator 160 KW Power Generator Auction-ID: A1-46031-4