po used for sale

Batch of EMV rack modules / power supplies / industrial units Auction-ID: A1-46070-174

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Key data: 28000 KW, 13000 V

Technical details are as follows: Engine Model: W18V32 Generator Maker: ABB Output: 7,050kWe x 720 rpm Frequency & Voltage: 60Hz & 13,800V Year of Production: 2001 Running Hours: Approx. 25,000 hours Fuel Oil: Diesel Oil, HFO The scope of supply is as follows: Generators: 4 units Control Units: Complete set for all 4 units Oil Purifier Units: 4 units, each with an oil tank Compressor Tanks and Compressors

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-765

Bowers XT Three-Point Internal Gauge 80-100 mm with Adjustment Ring 80.010 mm Three-point Internal Gauge from Bowers (XT Series) for accurate bore and internal measurement. Delivery includes original adjustment ring 80.010 mm, accessories and wooden box. UKAS calibration sticker (12/2022) as well as internal dimensional testing documented.     •    Dimensional verification documented (manual):     •    Nominal dimension: 80.010 mm     •    Actual dimension: 80.010 mm     •    Date: 29.01.2020     •    Additional UKAS calibration sticker (Bowers Group):     •     Calibrated: 05.12.2022     •    Cert ...

\" Mixed lot of 43 ER collets in different diameters. Product: Collet lot Type : ER collets Manufacturer: mixed / not clearly marked (some brand embossing visible) Quantity: 43 pieces Storage: Wooden and plastic support\" Auction-ID: A7-46417-174

\" Lot measuring tool & Mitutoyo accessories – depth measurement accessories, tips, adapters Item measuring accessories from workshop liquidation. Included are: • Mitutoyo Depth Gage Span 900370 – 180 mm (Made in Japan) • Mitutoyo 167-111 (MB-275) extension rod • Mitutoyo DB ATT-3 accessory • Several centering tips • Test mandrels • Magnetic holders (partly repackaged) • Various measuring tips and adapters Condition mixed: partly new, partly used with normal signs of use. \" Auction-ID: A7-46417-312

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-315

Tank capacity 4.1L; Max Ac output 2000W; Rated Ac output 1800W; unused; in the box; 230V connection; recoil; 8176 Auction-ID: A1-45902-160

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-760

CelonLab Power Generator incl. Footswitch Celon Aquaflow III Pump Celon Mobil Cart Auction-ID: A7-46412-76

\" Item (3x) Digital calipers 1. Digital calipers 0–150 mm ABSOLUTE IP67 Type: Mitutoyo 500-161-20 Model CD-15DCX ABSOLUTE Digimatic calipers with IP67 (Coolant Proof) rating. Industrial version for workshop and production environments. With original box. Specifications: • Measuring range: 0-150 mm • Degree of protection: IP67 • ABSOLUTE measuring system • Battery: SR44 • Made in Japan 2. Digital caliper 0-150 mm ABSOLUTE Type: Mitutoyo 500-626 Model CD-15PP Standard ABSOLUTE Digimatic caliper. With original case. Solid workshop design. Specifications: • Measuring range: 0-150 mm • ABSOLUTE system • Battery: SR44 • Made in Japan 3. Digital caliper 0-300 mm Digimatic Type: Mitutoyo 551-231 Model CDN-P30 Large caliper with 300 mm measuring range. Digimatic version with data interface. Suitable for larger workpieces. Technical data: • Measuring range: 0–300 mm � ...

diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43519-523

The distance between the needles: 10 mm; Auction-ID: A7-45992-113

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-762

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-317

Consisting of: 3 uprights approx. 800x2500 mm, 10 trusses approx. 5000 mm, without contents Auction-ID: A1-46310-124

\" Lot Precision Stop Angle / Hair Angle – 15-piece lot of 15 high-quality precision and hair angles for metal, machine and tool making. The lot consists of different sizes, designs and designs, some of which are DIN 875 / DIN 875-1. • hair angle / stop angle • different sizes (small to large) • solid designs, partly screwed • manufacturers include: • Helios-Preisser • primate • other industrial manufacturers • standard markings including DIN 875 / DIN 875-1 • several pieces as good as new / unused • several pieces used with slight signs of use \" Auction-ID: A7-46417-254

Tank capacity 4.1L; Max Ac output 2000W; Rated Ac output 1800W; unused; in the box; 230V connection; recoil; 8176 Auction-ID: A1-45902-161

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45902-3

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-314

Item (2x) Digital micrometer 25 - 75 mm 1. Mitutoyo 25–50 mm Reading: 0.001 mm Version: Digital With adjustment dimension & case Measuring range: 25–50 mm Resolution: 0.001 mm With ratchet With original case With setting standard 2. Mitutoyo 50–75 mm Reading: 0.001 mm Version: Digital With adjustment dimension & case Measuring range: 50–75 mm Resolution: 0.001 mm With ratchet With original case with adjustment standard Auction-ID: A7-46417-284

Merlin Gerin / Schneider Electric Industrial power switch Selpact DS2 - 1600A Condition: Used Auction-ID: A1-46070-362

Distance between needles: 10 mm; Auction-ID: A7-45992-54

\" Lot of boring heads / fine boring tools with holders (9 pieces) Extensive lot of mechanical boring tools from industrial use. Scope of delivery (complete only): • several fine boring heads with scale adjustment (e.g. pitch 0.02 mm) • boring rods / boring rods in different lengths • various tool holders (SK / Morse taper / special holders, mixed) • cutting pins / cutter holders (loose, in box) • operating instructions \"drilling and boring\" (old) • standard markings including TGL 30-120, Ø A60×8 Sale: • only as a complete lot • no individual sale \" Auction-ID: A7-46417-141

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45902-2

\" Measuring tools – mixed workshop lot Scope: Lot of 12 pieces Manufacturer: mixed (including M&W / unknown, one measuring device MAC), partly without marking Condition: used, functional • 1 × universal protractor / gauge with scale (0–180°) in a case • 1 × magnetic measuring device / display device (MAC) in a leather case • 1 × caliper / depth caliper (older version) • 2 × precision stop angle (various sizes) • 1 × stop angle (large) • 1 × feeler gauge set (ring tied) • 1 × steel ruler / ruler • 1 × set of small stop angle in wooden box • 1 × small measuring gauge / accessories (blue packaged, probably new/unused) • Various measuring / test gauges and accessories \" Auction-ID: A7-46417-132

\" Keyless chuck with Morse taper adapter Three RÖHM Spiro 3 keyless chucks with Morse taper. Manufacturer: RÖHM Series / Type: Spiro 3 Holder: Morse taper MK2 Clamping range: 3 – 16 mm Quantity: Item 3 pieces \" Auction-ID: A7-46417-173

\" Drip pan / PolyCompact pallet from the manufacturer DENIOS for the safe storage of drums with water-polluting liquids. • Manufacturer: DENIOS • Type: PCP 2.2 • Year of construction: 2006 • Material: PE-LLD (polyethylene) • Collection volume: 220 litres • Load capacity: 600 kg (with evenly distributed load) • Design: Pallet for 2 × 200 litre drums • General building authority approval: Z-40.22-303 Dimensions (approx.): • 128 × 85 × 30 cm (L × W × H) \" Auction-ID: A7-46417-142

\" Mixed lot of used clamping jaws / jaw segments made of steel, different designs and contours. The batch consists of various clamping or jaw segments, some with toothing, some with step or shape contours. Quantity: 32 pieces Net weight: 22 kg \" Auction-ID: A7-46417-195

\" Lot of centering drills / drills from workshop stock. Marking / Contents: • Quantity: 36 pieces • Mixed versions: • Center drill / combination drill • Various diameters and lengths Weight • Net weight: 14 kg \" Auction-ID: A7-46417-192

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-45902-82

\" 3-point internal measuring screw Measuring range: 225–250 mm Version: analogue Manufacturer: not clearly marked Accessories: Adjustment ring Ø 250 mm (marking \"250 C\"), original case, instructions, adjustment tool (screwdriver) 3-point internal measuring screw for the measuring range 225–250 mm including matching adjustment ring Ø 250 mm. The measuring device is located in the original case with foam insert. An operating manual for three-point internal measuring screws (analogue/digital) is included. Condition: Used. Visually good condition with slight signs of wear. Calibration sticker available, but no current calibration documented. Functional test not carried out. • 3-point internal measuring screw 225–250 mm • Adjustment ring Ø 250 mm • Original case • Instructions \" Auction-ID: A7-46417-121

\" 3-point internal measuring device / three-point internal measuring screw Manufacturer: Hogetex Measuring range: 250–275 mm (marking on the measuring device) Accessories: Setting ring Ø 237.503 mm, original wooden boxes, dimensional test documents Hogetex 3-point internal measuring device for the measuring range 250–275 mm. The set includes the matching adjustment ring Ø 237.503 mm. Gauge and adjustment ring are each supplied in the original wooden box. There is a dimensional check for the adjustment ring: nominal dimension 237.503 mm, actual dimension 237.505 mm (document available). Test sticker available on the adjustment ring. Condition: Used. Gauge and adjustment ring in good, well-maintained condition with slight signs of use. wooden boxes clearly used. No current, traceable calibration. Scope of delivery: • Hogetex 3-point internal measuring device, range 250–275 mm ...

The distance between the needles: 10 mm; Auction-ID: A7-45992-161

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45902-85

The distance between the needles: 10 mm; Auction-ID: A7-45992-160

\" Lot of centering drills / drills from workshop stock. Manufacturer / Identification: • WERKÖ • Mixed Lot Center Drill / Combination Drill • Various: • Diameters • Lengths • Tip geometries Weight • Net weight: 16 kg \" Auction-ID: A7-46417-190

Manufacturer: Hommelwerke Designation: Tester T 1000 Version: Portable measuring device in a transport case A portable measuring device \"Tester T 1000\" from Hommelwerke is offered in the original transport case. The case is labelled Tester T 1000 – Hommelwerke as well as several internal lock markings. Further technical details, equipment features or functional scopes are not documented. Condition • System is shut down • No functional test carried out • Technical condition unknown • Sale is expressly made as untested Scope of delivery • Portable measuring device in transport case • Accessories / contents exclusively according to illustrations Auction-ID: A7-46417-79

\" Lot of 5 U-clamps from the Suhl precision instrument factory. The measuring screws cover a measuring range of 50 to 175 mm. Article: U-touch screws / outer micrometer Circumference: Lot = 5 pieces Manufacturer: Feinmesszeugfabrik Suhl (GDR) Version: analogue, industrial version Storage: original wooden boxes Measuring ranges: • 50–75 mm • 75–100 mm • 100–125 mm • 125–150 mm • 150–175 mm \" Auction-ID: A7-46417-136

25 liter fuel tank; 1x AC230; 1x AC; 420CC; 400V; IP23; speed 3000/min; AVR; 5622 Auction-ID: A1-45902-761

\" Bundle of micrometers 0–50 mm – 7 parts – mechanical – used 7-part bundle of mechanical micrometers for external measurements in the range of 0–50 mm. • Total measuring ranges: 0–50 mm • Reading: 0.01 mm • Type: mechanical • Version: metric • Scope of delivery: 7× micrometer \" Auction-ID: A7-46417-220

Diesel Compressor General data: Machine type: Diesel compressor Operating hours: 1022 h Technical details: Maximum pressure: 7 bar Volume flow: 2.6 m³/min Engine: Deutz diesel Engine power: 21.6 kW Description: Portable diesel-powered compressor designed for industrial and construction applications. Equipped with a reliable Deutz engine, the unit provides efficient compressed air supply for tools and equipment in mobile or off-grid environments. Auction-ID: A7-40553-26

The distance between the needles: 12 mm; Auction-ID: A7-45992-162

The distance between the needles: 10 mm; Auction-ID: A7-45992-163

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-45902-5

Distance between needles: 12 mm; Auction-ID: A7-45992-53

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-88

Bundle of a total of 34 precision stop angles / hair angles in smaller versions. The brackets are made of metal (partly stainless steel / INOX) and are mainly stored in protective covers, plastic bags or wooden cases. Condition: Used / Stock Goods. Visually partly very good, partly with slight signs of use. Scope of delivery: – 34 pieces of stop/hair angles – incl. existing cases and packaging Auction-ID: A7-46417-210