126,618 used machines on RESALE, but how to find them? Machine Search
1 of used power supply 5 + 12 VDC, Kisters/Vero, Quadrovolt GK120, type 136-46202A, Vin 10-36 VDC, Pin max 180W. Also known as KHKS/Kisters part number: 0003192908 / X0003192908 / K0003192908
1 of used power supply 12-15 VDC, Kisters/Vero, Bivolt GK60, type 116-44755K, Vin 10-36 VDC, Pin max 90 W. Adjusted for 12 VDC output. Also known as KHKS/Kisters part number: 003192913 / X003192913 / K003192913
1 of un-used power supply, Schroff MPS Triple, type MPS 022, Vin 110-230 VAC (3 A), 50-60 Hz., Vout 5 V DC (23 A) / 12 VDC (3,5 A) / 12 VDC (2 A). Also known as KHKS/Kisters part numbers: 003192946 / X003192946 / K003192946
Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg
Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg
Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg
Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg
Key data: 1200 KW, 1600 kVA, 400 V
Jenbacher Gas engine [JMS 416GS] available in dismantled condition. Specifications: - Type: J416 GS - mfy: 2012 - Power: 1222kW - Fuel: Biogas - Frequency: 50Hz - Alternator rating: 1870kva - Major Overhaul done at 30000 and 60000 hours. - Mass: 13550kg - Service Log book and maintenance manual available - Accessories: Control Panel, Gas line, Heat exchanger, pumps.
Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of
Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock
Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...
Power supply for servo amplifiers -AC supply voltage: 18-110 V rms/47-63 Hz -DC link voltage: 24-155 V -Dimensions: 60/165/H240 mm -Weight: 1.7 kg
Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock
Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...
Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock
The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc ...
plastic shaft, plastic material, plastic shaft, plastic shaft material, polyamide -Solid material -Diameter: 335mm -Length: 1055mm -Weight: approx. 110 kg/piece -Quantity: 9 pieces available -Price per piece -Total weight: 1120 kg
Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock
Limit switches, buttons, safety switches, position switches -Price: per piece -Number: 2x available -Weight: 0.3 kg
Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x 63 A socket -Supply cable, plug 63 A -Dimensions: 520/520/H800 mm -Weight: 20 kg
Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile
Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 19.5 kg
pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece
Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit
Key data: 1550 KW, 1937 kVA
We currently offer: MTU generator set Engine MTU V12 4000 Generator Marelli Type: MJR 4582G220Z3 Power 1937 KVA / 1550 KW Hz 60 Volt 690 A 1623 1800 RPM Year of construction: 2011 Operating hours are low You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Power converter -Type: Sitop power 20 -Input: 3 AC 400 V -Output: DC 24 V/20 A -Dimensions: 240/130/H130 mm -Weight: 3.8 kg
Key data: 846 KW, 950 kVA, 400 V
Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
power resistor, wire potentiometer, resistor -Price: per piece -Number: 4x available -Weight: 0.5 kg
Limit switch, button, safety switch, position switch, safety switch, safety limit switch -Manufacturer: Schmersal, position switch unused OVP -Type: MD 441-11y-M20 -Number: 1x switch available -Price: per piece -Carton dimensions: 160/105/H115 mm -Weight: 1.8 kg/piece
Converter, power supply, power supply unit, switching power supply unit, power supply unit -Manufacturer: Siemens Schroff, power supply switching power supply -Type: Siemens 805 Schroff SC 8030 -Technical data: see nameplate photos -Dimensions: 290/135 / H65 mm -Weight: 1.9 kg
Power supply, power converter, power supply unit, switching power supply, MC3 controller -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg
Currently we offer a: Pramac GSW275V generator set Type: SC251TWAR04 Engine Volvo Type: TAD734 GE Alternator Mecc Alte ECO38 1LN4 Power 275 KVA Year of construction 2022 RPM: 1500 AVR control Hz 50 Weight: 2990 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.
face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg
Currently we offer a: Cummins generator set Type: KTA 50-G3 Engine Cummins Generator Leroy was built in 2003 Power 1450 KVA Hz 50 Built in 1995 Hours 7700 Without control cabinet Transformer included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
fixed center, fixed live center, fixed morse taper, fixed center, center -Fixed center point: Mount Morse taper MK6 -Dimensions: Ø 64 x 280 mm -Weight: 5.4kg
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Siemens, Power Supply -Type: 6EW1380-1AA -Input: 93-265V -Output: 24V/4A -Dimension: 150/80/H120 mm -Weight: 0.7 kg
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Siemens, Power Supply -Type: 6ES5 930-8MD11 -Number: 4 pieces available -Price per piece -Dimension: 120/45/H135 mm -Weight: 1.0 kg/pc.
Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Siemens, Simatic S5 Power Supply -Type: 6ES5 931-8MD11 -Number: 2x power supply available -Price per piece -Dimension: 120/45/H135 mm -Weight: 0,5 kg/pc.
PLC control, central module, memory, CPU, central device, positioning module -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Quantity: 1 piece available -Dimensions: 100/45/H135 mm -Weight: 0.3 kg
Power supply unit, power converter, power supply, switching power supply, DIN rail power supply -Manufacturer: Siemens, Simatic S7 Power Supply -Type: 6ES7 307-1EAOO-OAAO -Number: 2x power supply units available -Price: per piece -Dimensions: 115/80/H125 mm -Weight: 0.6 kg/pc.
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point flattened -Intake: Morse taper MK5 -Number: 1x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.8 kg/pc.
fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK3 -Number: 12x centering tips available -Price per piece -Dimension: Ø 25/125 mm -Weight: 0.3 kg/pc.
live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.
face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece
Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm
Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS43-12-R -Number: 3x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.3 kg/pc.
maximum number of results exceeded
please refine your search
