128,261 used machines on RESALE, but how to find them? Machine Search
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...
- Color Monitor - TouchScreen - Program - Air table - Resopal side tables with air - Spare knife
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...
Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.
Mefiag Satilum filter system Long Life Unit 3x with control system
Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996
M. No.: 6541110 Format (cm): 137 Equipment / Additional information: Side tables, air table, safety barriers, 1xreserve knife PALLET LIFTER VIBRO TABLE RAB5 WITH INTEGRATED SCALE (M. No.: 6581211 // Age: 1995) UNLOADER TR 1ER 145-4 (M. No.: 6591126 // Age: 1995)
R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA ---------------------------------------------------------------------- -------------------- installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -
cutting width: 66 cm feeding depth: 66 cm feeding high max.: 8 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:
PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300
Key data: 295 mm, 100 kg
Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm
- Color display - Program - Air table - Resopal side table left+right - Jogging table with air - Spare knife
KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...
- Standard model - for right side unloading - with existing accessories
diameter: . mm weight: . kg Type: . 0 Lot of turning tools and cutting tools. 4 boxes. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clipping machine Manufacturer: Poly Clip Model: FCA 3430 Capacity: 200 cycles/min Diameter range: 24–90 mm Voltage: 400V / 50Hz Electrical power: 2.8 kW Machine dimensions:1,455x1,200x2,015mm Machine weight: 590kg
turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 6000 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointmen ...
Poclain travel motor, number: 05816293, code B2433OU, suitable for Bomag rollers
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Manufacturer: Prima Power Model: EP1030 Year of Manufacture: 2012 Technical Data: - Power Supply Range: 340–440 V - Frequency: 50/60 Hz - Max. Power Consumption: 10 kW - Operating Temperature (standard): +5°C to +30°C - Operating Temperature (with Fan - optional): +5°C to +35°C - Operating Temperature (with Air Conditioner - optional): +5°C to +42°C - Relative Humidity: 20% to 75% (temporarily up to 90%) - Sound Pressure Level at Workplace: 72 dB(A) - Max. Pressing Force: 105 kN - Max. Beam Opening: 600 / 650 / 700 mm - Stroke of Press Beam: 310 mm - Approach Speed (Y-axis return): 110 mm/s - Approach Speed (Y-axis approach): 110 mm/s - Working Speed (Y-axis): 10 mm/s - Stroke (X-axis): 550 / 1000 mm - Stroke (R-axis): 200 mm - Positioning Speed (X1-axis): 800 mm/s - Positioning Speed (R-axis): 200 mm/s - Positioning Accuracy (X1-axis): 0.01 mm - Positioning Accuracy (R-axis) ...
A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible.
Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.
- Display - Program - Air table - Side tables - Jogger - Spare knife
1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife with 5 mm serration gauge, stroke 50 mm,
1 POLYTEX "Waterfall Sample" Mounting Machine type FC, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC).
1 POLYTEX "Waterfall Sample" Mounting Machine type FB, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC) and touch screen. sample size width infinitely variable up to 800 mm, unlimited length, output single ply up to 900 stripes per hour, output two-ply up to 450 stripes per hour,
1 POLYTEX pinking machine type ZP-V (Zigzag cutting), knife width 1020 mm, machine equipped with FASNACHT security light guards, stroke up to 65 mm height, up to 50 cuts per minute, PLC and inverter controlled. Fully automatic electric double feed system with 2 programs for simultaneous prechoice of sample length and width. Ensures highest degree of accuracy and operating comfort. Machine delivered with all possible extras/options namely: cutting height adjustment 0-1-2 mm (with or without carton underlay), increased hold-down force with hydraulic speed regulators, reinforced laser pointer.
A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.
A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.
General SKU404U1203 LocationBarneveld MakeEdelstahl Maurer No.208.09.006-13 Year of construction2009 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume130 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity130 ltr Vessel sizesdia. 500x668 mm Dished bottomcheck Top connectionscheck DN50 (2x) Outletdia. 33 mm With jacketcheck 11 Ltr. Max. temperature-15°C/+150°C With propellor stirrercheck (magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) Information Floorspace0,75x0,75 m CEcheck Total height1,40 m Weight270 kg Extra SpecificationsRa ≤ 0,6 µm Stainless Steel ReactorsEdelstahl MaurerReact ...
General SKU352W931 LocationBarneveld MakePowtek LTD TypeP300x450 Nibbler No.P9211 Main Features MaterialStainless steel Motor4 KW Length450 mm Specified Features - Sieve granulator Gratercheck Rotor sizesdia. 300mm x 470mm Sieve sizesdia. 280 mm Sieve perforation8 mm With hoppercheck Inlet600 x 600 mm Outlet450 x 400 mm Motor4 kw (380 V, 1440 rpm, (Ex)) Speed+/- 84 rpm MaterialAluminium, Stainless steel 1.4552, Stainless steel Information Floor space2,0 x 0,7 m Total height1,0 m Weight430 kg ATEX compatiblecheck Extra Specifications- aluminium cladded inlet - Previous use in food industry Technical specs Extra informationscrew dia. 280 mmSieve granulatorsPowtekSieves > Sieve granulatorsBrand > Powtek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...
General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect ...
General SKU316S1017 LocationBarneveld Makeunknown missing type plate Main Features MaterialStainless steel Volume1200 Ltr. Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity1200 Ltr. Sizesdia. 1280x1350 mm Conical height600 mm Conical bottomdia. 400 mm Dished topcheck Manholedia. 300/450 mm Inletdia. 200 mm Top connectionsdia. 95 mm Outletdia. 400 mm Information Total height1,5 m Weight250 kg Floorspace1,45x1,45 mSilos-Tanks > SilosBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU008A066 LocationBarneveld MakePohl GmbH & Co. KG TypeE No.0003 Year of constructionunknown Main Features Motor0.075 KW Number of1 heads Specified Features - Capper CapperFlanging machine (1x) Single headcheck Suitable for(various size parts) Number of closing heads:1 With motor0,075 KW, 220 Volt (1 Ph) With variable speed drivecheck Information With switchcheck Floorspace0,6x0,5 M Total height0,9 M Weight90 KGCappersPohl & CoPackaging machines > CappersBrand > Pohl & Co What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU203W028 LocationBarneveld MakePowder System TypePSL Mach.No.C74522 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel/Coated Surface0.3 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface0,3 m² Capacity130 l. Vessel sizesDia. 800x800 mm Plate sizes800 mm Top connectionscheck With jacketVolume 10 l. Max. temperature-25°C/+150°C With pumpGrundfos DMH 213-10 B-SS-L/T/SS-X-41A1A1X Capacity213 l/hr Motor230/400 V (Ex) MaterialPFA coating Information Year of construction2014 Mounted on wheelscheck Total height2,00 m CEcheck Floorspace1,15x1,05 m Weight1000 kg Extra SpecificationsWith agitator manually operatedNutsche filtersPowder Systems PSLFilters > Nutsche filtersBrand > Powder Systems PSL What you can expect from Foeth: ...
General SKU413W1306 LocationBarneveld MakeFukae Powtec TypeLFS-GS-1J No.631 Mach.No.631 Main Features MaterialStainless steel Volume2 Ltr. Motor0.4 KW Inlet diameter20 mm Width180 mm Specified Features - Universal mixer Universal mixercheck Capacity2 l. Vessel sizesDia. 180x100 mm With covercheck InletDia. 20 mm Manual operated outletcheck OutletDia. 50 mm With jacketcheck With motor0,40 kW, 230 volt With lump breakercheck With motor0,20 kW, 230 volt MaterialStainless steel 1.4301 (304) Information Year of construction02-1993 Year of construction1993 Mounted on wheelscheck With switchcheck Weight155 kg Floorspace1,20x0,80 m Floor space1,20x0,80 m Total height1,40 m Extra SpecificationsVessel can be cooled and heated,Universal mixersFukae PowtecMixers > Universal mixersBrand > Fukae Powtec What you can expect from Foeth: -- Machine is in working conditi ...
General SKU300U586 LocationBarneveld MakeAeromatic-Fielder TypeGP SP 1 Mach.No.02313 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Specified Features - Universal mixer Universal mixercheck Capacity3-7,5-10Ltr. With covercheck Inletdia. 15 mm Pneumatic operated outletcheck With jacketcheck Max. temperature0-85°C With motorcheck 3,0kW With variable speed drivecheck Rotor speed2-1500rpm With lump breakercheck 0,3kW With motorcheck Rotor speed1000-3000rpm MaterialStainless steel 1.4306 (304L) Information Year of construction2002 Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,2x0,8 m Total height1,5 m Weight600 kg ATEX compatiblecheck Extra SpecificationsThis very comprehensive general process unit has many additional components, including multiple pans and stirrers. This unit features a microwave func ...
General SKU234T258 LocationBarneveld Makeunknown Main Features MaterialStainless steel Motor0.37 KW Width85 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesDia. 85x87 mm Sieve sizesDia. 85x90 mm Sieve perforation± 3,5x3,5 mm With hoppercheck Motor0,37 kW, 220-240/380-415 Volt Speed149 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchgearcheck (as is) Floor space0,85x0,7 m Total height1,1 m Weight80 kgSieve granulatorsPowtecSieves > Sieve granulatorsBrand > Powtec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU303U611 LocationBarneveld MakeDYNO-Mill WAB Bachofen TypeECM Poly No.070215 Year of construction2007 Pressure Working pressure4 Bar Main Features MaterialStainless steel Volume8.2 Ltr. Motor24 KW Specified Features - Sand mill Materialsilicon, Stainless steel 1.4112 Horizontal sand millcheck Capacity8,2Ltr. Housing dimensions Dia: 220mm InletDia: 30 mm OutletDia: 30 mm With mechanical sealcheck With jacketcheck Max. temperature5-85°C Motor24kW, 380-420/655-725 Volt, 1477rpm (Ex) Rotor speed1251 rpm Without ballscheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight1000kg CEcheck Floorspace1,40x0,78 m Total height1,68 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...
General SKU437W1431 LocationBarneveld MakeH.E.L. TypePoly-block Mach.No.E1039S Main Features MaterialGlass Specified Features - Miscellaneous MaterialBorosilicate Glass 3.3 Capacity-40°C to +200°C Motor230 volt Capacity4 x 100 ml Information Year of construction2011 Total height0,50 m CEcheck Floor space0,30x0,50 m Weight50 kg Extra SpecificationsCompact automated parallel synthesis platform, 4 reaction zones independent agitation control, 250 to 1500 rpm with parts MiscellaneousHELMiscellaneous > MiscellaneousBrand > HEL What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU293X395 LocationBarneveld MakeMerck Millipore TypeMobius Pod Cart 2 levels No.F0BN35875POD Year of construction2020 Pressure Working pressure3.4 Bar Main Features MaterialStainless steel Pressure124 Bar Surface1.1 m2 Specified Features - Filterpress Filter presscheck Filter surface5x 0,55 m², 1x 1,1 m² Internal platen sizes470x260 mm External platen sizes550x310 mm Central inlet300 mm Manual operated closing2x Enerpac Manual openingcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck CEcheck Floorspace1,70x0,80 m Total height1,17 m Extra SpecificationsMax inlet pressure 3,4 bar for :ultra filtration FilterpressesMerckFilters > FilterpressesBrand > Merck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...
maximum number of results exceeded
please refine your search
