pneumatic punching machine used for sale

Semi-automatic book sewing machine, max. 36 cm spine length, 7 needles, gauze device

Key data: 5000 kN, 3845 g/PS, 120 mm

Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm

Key data: 3000 kN, 3268 g/PS, 100 mm

LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4

For sale is this bottle washer from Seitz. This is currently still connected.

Key data: 3000 kN, 3268 g/PS, 100 mm

GL300 PET P100/120 E100 in production running 72cav molds exworks south america 1997 auxiliaries Pet resin dryer Moretto DP311 model DP 311HT-CC'S Throughput 550 kg/h silo capacity 3.5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems NSC-NP

Key data: 45 mm, 1350 , 298 U/min

Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available

Key data: 3000 kN, 3268 g/PS, 120 mm

GL300 PET P100/120 E120 in production running 72cav molds exworks south america 1998 auxiliaries Pet resin dryer Plastic Systems DR218HT Throughput 550 kg/h silo capacity 4Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems Plastic Systems P+D8:J55SNC 9

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...

Key data: 3000 kN, 2746 g/PS, 120 mm

GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5

Sell some machines from our warehouse because we need the space to expand

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Italma slicer, flywheel machine on a pedestal, red lacquered in vintage style, knife diameter 330mm, the flywheel automatically drives the blade, carriage and feed, an eye-catcher for customers. Weight approx. 123kg, Machine used, in good condition, fully functional

Sell some machines from our warehouse

Inv. Num. : 8220 Type: 2 kW Producer: Lxshow Created: 2022 Parameters: Maximum power: 2 kW Hours: 33.7 h Work table length: 3000 mm Work table width: 1500 mm Machine height: 1805 mm Machine length: 4626 mm Machine width: 2876 mm

Measuring range X,Y,Z 1200,1800,1000 mm Software calypso Measuring head 5 axis Vast XXT

Manual Swivel Bending Machine Specifications: - Max. working width 1030 mm - Max. material thickness 3 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

Sell our braiding machines that we had bought for test purposes, after years of back and forth we didn't get this product right, which is why we decided to sell the machines, the machines are as good as new because they have only 85 hours of operation behind them, some were not even used and are brand new, if you are seriously interested, it would be worth a visit, there are a total of 9 machine bodies, each of which has 7 pieces of 4 X 8 bobbins on it and 2 machines with 2 X 16 bobbins and a fully automatic winding unit, everything that goes with it is included, some yarn and many spare parts

Manufacturer: Suzuki Model: K5 Automatic Year of Manufacture: 2001 Type of Machine: Warping Machine Minimum Warping Capacity: 10 meters Maximum Warping Capacity: 1200 meters Creel: ROSTONI, 240 positions Condition: Fully operational and in perfect working condition Find more here - / Contact us at -

Key data: 280 kN, 30 mm

Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...

Inv. Num. : 8228 Type: TC-42 Producer: Spinner Created: 2004 Parameters: Control system: Siemens Max. machining length: 500 mm Maximum turning diameter over bed: 400 mm Maximum main spindle power: 12 kW Maximum spindle speed: 4500 1/min Spindle bore: 42 mm Equipment: Powered tools

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Inv. Num. : 8232 Type: Twin 42 Producer: Gildemeister Created: 2002 Parameters: Control system: Siemens Sinumerik Switch-on hours: 80654 h Hours: 33758 h Maximum turning length: 650 mm Maximum turning diameter over bed: 250 mm Maximum turning diameter over support: 120 mm Maximum length of travel in the X-axis: 300 mm Max. travel length of the Z-axis: 650 mm Maximum spindle speed: 7000 1/min Length: 4770 mm Width: 2220 mm Height: 1950 mm Weight: 5500 kg Equipment: Powered tools Bar Feeder

Manufacturer: Syntegon Model: AFG 5026 Year of Manufacture: 2019 Type of Machine: Filling and Sealing Machine for Vials with Powder Condition: Not used Key Features: - Zoning concept for infeed, filling, outfeed, and drive area - Best accessibility and simplified cleaning procedure - Innovative transport system for continuous and intermittent operations - Vertically rotating mechanism - High output, even with 100% IPC (In-Process Control) - Ideal for wall installation - Optimized Design: - Vertical wall design for best operability - One-side operability for streamlined workflow - Suitable for integration with barrier systems - In-wall installation for space efficiency Find more here - / Contact us at -

amount: 1 STK The mechanical zero setter is the standard version of our mechanical zero setters. It has a height of 50 mm and is suitable for precisely determining the position of workpiece surfaces or tool lengths in the Z direction on milling machines or lathes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3300 mm swing diameter: 4000 mm turning height: 3050 mm workpiece weight: 25 t faceplate turning speed range: 8 - 40 U/min ram swivable +/-: 30 ° main drive motor: 55 kW Control: Heidenhain TNC 640 total power requirement: ca. 85 kW weight of the machine ca.: 85 t dimensions of the machine ca.: 8,0 x 7,7 x 6,7 m Conversion and modernisation in 2024 equipped with: - CNC control Heidenhain TNC 640 & Handwheel - 2 swivelling ram supports (1x CNC controlled) - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner Bearing Milling Machine Corner Connector Milling Knoevenagel Production of corner bearings, corner connectors For furniture construction Type US 1X Machine No. 5234 Year of manufacture 1980 Production of wooden corner connectors for tables and other furniture

Manufacturer: KRONES Series: Autokol Year of Make: 2005 Capacity: 10,000 B/hr Formats: 500ml, 800ml Label type: self-adhesive; front/rear

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Wrapping Machine with mechanization / roller conveyors in front/behind the machine

Bystar 4020 Year of construction 2006 4.4 Kw with pipe cutting axis very good condition

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

Sinel Systems Type A tube labeling machine suitable for conical products with a diameter of 16 - 40 mm and a length of 152.5 - 173.5 mm, label width 15 - 160 mm, label length 10 - 400 mm, with infeed roller conveyor for manual feeding of the tubes, label dispenser HERMA Type H400 R IDEA, label roll core diameter 76mm, label roll outer diameter max. 300mm, label dispensing speed 3 - 20 m/min., product presence control and stopper color control, Omron HMI operator control panel, Siemens S-7-1200 PLC, electrical connection 220V/ 500W, machine floor space 1650 x 780 mm (L x W), machine height approx. 1980 mm, Machine nett weight aprox. 210kg.

C - bow is in good technical and optical condition

C-bow in very good technical and optical condition

Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm

bore capacity in steel (diameter): 50 mm throat: 365 mm bore stroke: 230 mm spindle diameter: 60 mm spindle taper: MK 4 spindle turning speed range: 54 - 1032 U/min no. of turning speeds: 9 Stufen feeds: mm/U table surface area: 620 x 520 mm total power requirement: 3,5 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,2 x 0,8 x 2,45 m Pillar drill with - Left/right rotation - Machine light - Coolant - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BOKU SK120 Spiral Kneading Machine for 120 Kg Dough - Stainless steel boiler - Stainless steel spiral - Suitable for 120 kg dough - 2 speeds - With timer

SPECIFICATIONS: Machinable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Different types of grinding wheels

- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025

various Rolling Tools for Jupiter Baking Machines - Condition: used - for different angles and Wafer Lengths

- Condition: used - Baking Plate Amount: 45 Baking Plates - Capacity: approx. 2.500 pieces / Hour - Cone Size: 19°, Length: approx. 75 mm, Ø approx. 35,75 mm - Engraving: without engraving Equipment: - incl. Drum Roller - incl. Stacking Table

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking plate Size: 260 x 240 mm - Capacity: approx. 2,200 - 2,800 pieces / Hour - Cone Size: max. 200 mm - Engraving: 5 x 5 mm Equipment: - incl. Cooling Conveyor - incl. Stacking Table

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO