pneumatic punching machine used for sale

Machine vise WMW jaw width: 160 mm jaw height: 48 mm span: 0...200 mm used, tested ! Dimensions: 500 x 160 x 130 mm

Machine vise WMW jaw width: 125 mm jaw height: 60 mm gradation of fixed jaw at 35 mm height ! span: 0...135 mm used, tested ! Dimensions: 410 x 125 x 125 mm

Machine vise PAGUS jaw width: 125 mm jaw height: 40 mm span: 0 mm... 80 mm on table with graduation 360° rotatable 90° tiltable used, tested ! Dimensions: 320 x 250 x 190 mm

Machine vise WMW, ROTO RECORD SN 160 jaw width: 160 mm jaw height: 50 mm span: 0...130 mm used ! Dimensions: 480 x 160 x 125 mm

Machine vise with table RÖHM jaw width: 125 mm jaw height: 45 mm span: 12 mm... 210 mm pneumatic clamping force amplifier ! with turntable, 360° rotatable used ! Dimensions: 440 x 300 x 145 mm

Machine vise PAGUS jaw width: 140 mm jaw height: 50 mm span: 0...110 mm used, tested ! Dimensions: 420 x 140 x 110 mm

Machine vise STANKO jaw width: 250 mm span: 220 mm jaw height: 70 mm good condition ! Dimensions: 650 x 300 x 180 mm

Washing machine pump, water pump, centrifugal pump KP 8.3 C S 2 - 10 motor: 130 Watt 220 V Dimensions: 150 x 120 x 140 mm

Cutting Machine Fischer Hartmannsdorf OK S TZ 2 Year: 1981 0.37 kW 220 / 380 V Dimensions: 350 x 180 x 480 mm Weight: 11.5 kg

Machine foot set (2 pieces each), wedge feet, levelling shoe FIXATOR support height: 77 - 82 mm contact surface: Ø 75 mm with level increase Ø 100 mm x 50 mm and Ø 100 mm x 3 mm anchor bolt M20 2 pieces each Weight: each 8.9 kg used, tested ! Dimensions(one foot): 195 x 120 x 200 mm

Machine control, remote control TELEMECANIQUE mit Not Aus 1700 mm Cable gebraucht, geprüft ! Dimensions: 600 x 200 x 100 mm

Screening machine PAGUS sieve Ø approx. 2.5 and 5 mm Screen box: 400 x 295 mm approx. 63 stroke per min motor: 0.37 kW 380 V used, tested ! Dimensions: 1200 x 750 x 550 mm

Machine Glass Thermometer, Thermometer CONATEX 0 to 160 °C 580781 SM000066 L= 100 mm 1/2 in New ! Dimensions: 380 x 90 x 40 mm

Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB accident protection system PREVENTA with emergency out ! used. tested ! Dimensions: 460 x 165 x 145 mm

Machine Glass Thermometer, Thermometer TECSIS 0 to 100 °C L= 65 mm 1/2 inch New ! Dimensions: 285 x 35 x 55 mm

Machine foot set with side orientation, wedge feet, levelling shoe PAGUS support height: 84 - 90 mm side orientation: 10 mm support surface: 170 x 110 mm weight: 14.25 kg 2 pieces each Dimensions: 260 x 165 x 125 mm

Welding machine EWM MESSER TIG 350 DC 350 A 400 V Dimensions: 1000 x 520 x 900 mm

Machine Foot Set, Machine Foot, Wedge Foot PAGUS Support Height: 80 - 90 mm Support Surface: 90 x 80 mm Machine Foot Set consists of 4 feet ! Dimensions 240 x 100 x 90 mm (one foot)

MIG / MAG Welding Machine JUPITER MIG 230 230 A 400 V used ! Dimensions: 350 x 1000 x 700 mm

Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm

Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

Brush deburring machine, double bench grinder, deburring machine ELBTALWERK SETr2x350 TGL 16570 Disc diameter Ø max 350 mm Disc width max 40 mm 1,5 kW 1500 rpm 380 V with 2 wire brushes Dimensions: 810 x 450 x 1220 mm

Tool grinding machine HENDEL+KUBASCH WBV year: 1961 grinding diameter max: 50 mm grinding length: 250 mm workpiece length: 300 mm motor: 0.0.00 mm 7 kW 380 V used, tested !' Dimensions: 1000 x 1000 x 1400 mm

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

Welding machine, welding rectifier, jump starter, battery starter, charger VISZEK TIRISZTAR 24 SV built: 1988 charging current: max. 63 A < < br />jump start: max. 400 Abr /> welding current: max 130 A 9 kW 380 V 3AC used, checked! without batteries ! Dimensions: 820 x 520 x 940 mm

CNC Flame Cutting Machine BACH APOLDA AC 2500 Year: 1993 Control: MESSER GRIESHEIM KS20A Dimension : 3800 x 2000 mm 2 burners oxygen, propane without table ! Rails 8 meters (2 x 8 meters) used, tested ! Documents available. Dimensions : 3800 x 2000 x 2000 mm

CNC Flame Cutting Machine, Plasma Cutting Machine BACH APOLDA ACW 2500 Year: 2001 Control: NBS 400 Dimensions of System: 4100 x 1900 x 1500 mm without table: rail 8 meter (2 x 8 meter) 2 oxy-fuel cutting heads 1 plasma cutting head MANNSFELD PGS 50 74 kVA Bj.: 1988 without table ! used, tested ! Dimension plasma equal: 1600 x 660 x 1500 mm

Beading machine RAS REINHARDT RAS 12.31 sheet thickness: max. 1.75 mm projection: 280 mm roller center distance: to 65 mm , to 85 mm motor: 0.37 kW 380 V with foot switch ! Clockwise / counterclockwise switchable used, checked! Dimensions: 830 x 430 x 1350 mm

Machine for the production of length pitches Feinmess Dresden TLZ1000/ 1 MZ visual bar scale adjustment division: length = < 1050 mm table: pitch length =

Drain valve for industrial washing machine DEPEND - O - DRAIN, INC. Model: MDB-C-58 P/N: 26742311 Inlet: Ø 54 mm Spout: Ø 59 mm Flange: 146 x 82 mm Motor: 230 V 0.18 A 50 Hz New ! Dimensions: 165 x 142 x 140 mm

Machine reamer BECK Ø 25 mm, H7 HSS-E, MK ( Ø25mm,H7HSS-E,MK ) DIN 208 B ( DIN208B ) 030111 1108 Snow length: 68 mm New !' Dimensions: 270 x 30 x 30 mm

plate thickness: 1,2 mm 0: 62 mm weight of the machine ca.: 50 kg Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,8 mm 0: 52 mm weight of the machine ca.: 30 kg Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm

grinding length: 800 mm centre height: 150 mm Control: FANUC grinding wheel size: max. 400 x 63 x 127 mm workpiece weight: 120 kg engine output: 7,5 kW turning speed range - grinding wheel: 45 m/s m/s swivelling range: +45/-15° Grad work piece spindle speed: 22-313 / 51-750 U/min workpiece spindle swivable +/-: 90 ° tailstock quill taper MT: MK 4 x-travel: 355 mm z-travel: 4,0 mm Working speed: 0 + 7,5 m/min weight of the machine ca.: 4,0 t dimensions of the machine ca.: BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: mm x-travel: 1000 mm throat: mm table length: 1300 mm table width: 300 mm total power requirement: 14 kW weight of the machine ca.: 3.2 t required space: 2.9x3.1x2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 600 mm z-travel: 460 mm total power requirement: 4 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine reamer BECK Ø 25 mm, H7 HSS-E, MK ( Ø25mm,H7HSS-E,MK ) DIN 208 B ( DIN208B ) 030111 1108 Cutting length: 68 mm used, tested ! Dimensions: 270 x 30 x 30 mm

x-travel: 750 mm y-travel: 230 mm z-travel: 360 mm total power requirement: 5 kW weight of the machine ca.: 1.3 t required space: 1.65x1.3x2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mm grinding width: 600 mm workpiece height: 800 mm Table dimensions: 2500x600 mm vertical movement: 800 mm throat: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine JONES & SHIPMAN 540 LAR, capacity 450x150 mm, magnetic plate. Automatic cycle, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 0 - 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.000 Kg, Accessories: Magnetic plate, Auto cycle, Power rise and fall, DRO

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPT� �»¿ï»¿ï»¿ï»¿IDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

plate thickness: 1,25 mm Shank diameter: 26 mm weight of the machine ca.: 50 kg Sheet thickness: 1.25 mm Roller shaft color: 62 mm Roller center distance: 250 mm Shaft-Ø: 26 Throat Depth: 260 mm Dimensions of the Machine: Length: 600 mm Height: 550 mm Width: 350 mm Weight: about 50 kg incl. standard rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- New / unused BHS Sonthofen gearbox units - Individual offers possible Pos. 01) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 02) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 03 FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 04) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 05) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - D ...

used Fortuna head machine KM6, 6 rows with Mehler. Easy cleaning of the parts because it is easily accessible. Capacity up to max. 4800 pieces/hour Weight range of the head machine between 35-80 grams. Dividing and shaping doughs as if by hand. Trade-in and shipping on request. -Stainless steel - 6 rows - Weight range 35-80 grams - Flour shakers

x-travel: - mm y-travel: - mm z-travel: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Winding machine Lippelt Celba Multi Roll S-50N -Wrapping machine Lippelt -Type: S-50N - Condition see pictures